Dominik Kuhlen wrote:
> Hi,
>
> The attached pctv452e.c works for me without frame drops in DVB-S and DVB-S2.
>
> On Friday 29 February 2008, Manu Abraham wrote:
>> Dominik Kuhlen wrote:
>>> On Friday 22 February 2008, Dominik Kuhlen wrote:
>>>> Hi,
>
manu wrote:
> On 03/11/2008 02:27:31 AM, Vladimir Prudnikov wrote:
>> I'm getting late buffers with vlc on some transponders (DVB-S, same
>> parameters, good signal guaranteed) while everything is fine with
>> others. Using multiproto and TT S2-3200.
>> Anyone having same problems?
>
> Can you
lso, considering that since almost everyone else has this working,
maybe it has to be specific to your setup/machine.
Regards,
Manu
>
> Thanks for your help,
> Simeon
>
> - Original Message
> From: Manu Abraham <[EMAIL PROTECTED]>
> To: Simeon Simeonov <[EMAIL
Tim Hewett wrote:
> Simeon,
>
> It doesn't matter re: the diseqc commands, with no switch present will
> be nothing listening, assuming there is nothing else connected such as
> a rotor.
The SEC equipment should work fine AFAICS. The bad aspect of the tests
were that no one really came up wi
manu wrote:
> On 03/06/2008 06:34:28 AM, Vladimir Prudnikov wrote:
>> Can't get TT S2-3200 locked on high SR transponders. I have seen a
>> lot
>>
>> of suggestions regarding changing Frequency/Symbol rate on various
>> forums but no luck. Low SR are fine.
>> Does anyone have a "revision" of m
David BERCOT wrote:
> Hi,
>
> Before buying a new CI for my TT S2-3200, I'd like to know if it is
> really broken...
>
> After the installation of multiproto, I have this error :
> saa7146: register extension 'budget_ci dvb'.
> ACPI: PCI Interrupt :05:01.0[A] -> GSI 22 (level, low) -> IRQ 22
Florian Lohoff wrote:
> On Mon, Mar 03, 2008 at 06:17:58PM +0400, Manu Abraham wrote:
>>> You mean tune and then check if there is a SIGNAL and possibly a LOCK? I
>>> do that yes ... But first comes the tune - On an uninitialized state of
>>> a demod/tuner i woul
Florian Lohoff wrote:
> On Mon, Mar 03, 2008 at 06:04:12PM +0400, Manu Abraham wrote:
>> The more important part is to first check for a signal, before
>> attempting a tune.
>> Lack of doing so, will result in a lot of frustration in many cases.
>> Though it is complet
Florian Lohoff wrote:
> On Mon, Mar 03, 2008 at 05:49:53PM +0400, Manu Abraham wrote:
>> Basically you seem to get the wrong end, (it's one whole line, no corners
>> to it) since you think that it all starts with a tune operation. No, a tune
>> operation is not the fi
Florian Lohoff wrote:
> On Mon, Mar 03, 2008 at 05:41:17PM +0400, Manu Abraham wrote:
>> You are wrong again. Please look at the code, how statistics related
>> operations are retrieved.
>
> When i issue a DVBFE_GET_INFO i dont get stats i get informations
> about the de
Manu Abraham wrote:
> Florian Lohoff wrote:
>> On Mon, Mar 03, 2008 at 04:03:09PM +0400, Manu Abraham wrote:
>>>> - make SET_PARAMS the call to honor delivery in dvbfe_params and remove
>>>> the setting of the delivery of GET_INFO
>>>>
>>>&g
Florian Lohoff wrote:
> On Mon, Mar 03, 2008 at 04:03:09PM +0400, Manu Abraham wrote:
>>> - make SET_PARAMS the call to honor delivery in dvbfe_params and remove
>>> the setting of the delivery of GET_INFO
>>>
>>> I'd prefere the 2nd option beca
Florian Lohoff wrote:
> On Mon, Mar 03, 2008 at 03:09:23PM +0400, Manu Abraham wrote:
>>> As i already wrote - SET_PARAMS is _NOT_ enough. Please try yourself.
>>> Unload/Load the module and simple issue a DVBFE_SET_PARAMS (NOT
>>> GET_INFO) and it doesnt tune/lo
t was working with another card, it should be working with this card
too (i
had some doubts, but when you said it worked with some other card, then i
don't see the issue in here with the diseqc part. The FiFO either works
or not)
> - Original Message
> From: Manu Abraham &l
Florian Lohoff wrote:
> On Mon, Mar 03, 2008 at 04:22:00AM +0400, Manu Abraham wrote:
>> This won't work. params will contain data only after you have
>> successfully issued
>> SET_PARAMS not before. For SET_PARAMS to work, you need the delivery system
>> cac
Florian Lohoff wrote:
> Hi,
>
> This is
> why my application, which did not issue a GET_INFO but rather set the
> delivery system in the dvbfeparam, failed. The delivery in the
..
>
> - A GET or READ call should never ever alter state - otherwise it should be
> named
> different. Its the sa
André Weidemann wrote:
> Note:
> Manu's code in changeset 7207 seems to have broken tuning for this
> device. Changesets 7202 to 7205 are still working.
Cool, thanks for testing. Still need to figure out why deselecting
puncture rates
doesn't work as expected. Have pulled out the offending chan
e9hack wrote:
> Rikard Wissing schrieb:
>
>> [ 4022.656841] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
>> [ 4022.658236] TDA10021: i2c-addr = 0x0c, id = 0x7d
>> [ 4022.658238] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend
>> (TDA10021) @ 0x0c
>> [ 4022.658240] mantis_fro
Florian Lohoff wrote:
> Hi,
> i was wondering why i have a problem in my application that i need to
> run scan once after loading the module, otherwise my DVBFE_SET_PARAMS
> fails - I couldnt explain it until i looked into the kernel code - In
> the dvb_frontend.c i see this code:
>
> 1738
Simeon Simeonov wrote:
> Hi Manu,
>
> I am attaching two gzipped logs. They are supposed to tune to the same
> frequency using the tip
> of Mantis tree. The difference between the two are that in the GOOD log no
> repeat command is used
> and in the BAD log one repeat for the switch is issued. T
Simeon Simeonov wrote:
> I am using VP-1041 with the lnb21_attach changes to the ISEL and PCL bit
> settings.
> At the moemnt I have no clue why I am having this diseqc issue. I also
> checked the
> logs and I see from time to time diseqc_fifo_full messages but there is no
> correlation
> with t
ssue, but then
have you tried with the LNBP21 attach change ?
Regards,
Manu
> - Original Message
> From: Manu Abraham <[EMAIL PROTECTED]>
> To: Simeon Simeonov <[EMAIL PROTECTED]>
> Cc: linux-dvb@linuxtv.org
> Sent: Thursday, February 28, 2008 1:29:55 AM
>
Seppo Ingalsuo wrote:
> Simeon Simeonov wrote:
>> Did you try changing line 250 in mantis_dvb.c to:
>> if (!lnbp21_attach(mantis->fe, &mantis->adapter, LNBP21_PCL,
>> LNBP21_ISEL)) {
>>
> I tried mantis-a9ecd19a37c9. Without the change success in positioning
> was about 0% simi
Dominik Kuhlen wrote:
> On Friday 22 February 2008, Dominik Kuhlen wrote:
>> Hi,
>>
>> -snip
>>> Great, that was the trick, now scanning and szap work fine.
>>>
>>> Thanks for that hint!
>> You're welcome.
>>
>> BTW: do you receive broken streams (symbol rate 22000 or 27500)?
>> Currently
Simeon Simeonov wrote:
> I don't know if is the same but with the latest mantis tree I get 100%
> success.
> Reverting to changeset mantis-100d4b009238 (which I think corresponds to
> multiproto 7200)
> I do NOT any locks on the same transponder.
For the mantis tree, please test this changeset:
André Weidemann wrote:
> Dominik Kuhlen wrote:
>> Hi all,
>>
>> Manus multiproto HG tree (jusst.de/hg/multiproto) and the attached
>> patch make the pctv452e work with DVB-S2 and DVB-S :)
>
> Hi all,
> I took Dominiks patch and added support for the TT connect S2-3600.
>
> The S2-3600 is tuning
Michael Curtis wrote:
> Can anyone help with this please?
>
Disable that relevant module by using a custom config, such as
using make menuconfig, or make xconfig or whatever.
Regards,
Manu
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Cur
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Manu Abraham
> Sent: Dienstag, 26. Februar 2008 22:45
> To: linux-dvb@linuxtv.org
> Subject: [linux-dvb] STB0899 users, please verify results was Re:
> TechniSat SkyStar HD:
Zaheer Merali wrote:
> So we don't take the whole multiplex into userspace, just the pids we
> need on an as needed basis.
Though this will work for FTA streams, it won't work for scrambled streams.
Regards,
Manu
___
linux-dvb mailing list
linux-dvb@l
Vangelis Nonas wrote:
> Hello,
>
> Here is the output of hg log|head -n 5 for two different directories
> (multiproto and multiproto_7200)
>
> for multiproto:
> changeset: 7205:9bdb997e38b5
> tag: tip
> user:Manu Abraham <[EMAIL PROTECTED]>
&
Vangelis Nonas wrote:
> Hello,
>
> I have tested again changesets 7201 and 7205 with verbose 5, 2 and 1
> scanning 101 transponders on Hotbird (I attach my transponders file --
> it is taken and adopted from ProgDvb).
>
> Here are my statistics:
>
> Changeset Verbose channels
>
Simeon Simeonov wrote:
> Hi Manu,
>
> Thanks for the reply
> Yes, indeed I tried over the weekend and by selecting the higher limitation
> by ISEL register:
>
> if (!lnbp21_attach(mantis->fe, &mantis->adapter, 0, 0x40)) {
>
> My rotor now moves. Do you think it is better to use static current
Artem Makhutov wrote:
> Hi,
>
> On Sun, Feb 24, 2008 at 05:52:39PM +0400, Manu Abraham wrote:
>> Artem Makhutov wrote:
>>> Hi,
>>>
>>> On Sun, Feb 24, 2008 at 02:18:52AM +0400, Manu Abraham wrote:
>>>> Also, can you please do a benchmark
Manu Abraham wrote:
> Simeon Simeonov wrote:
>> Hi Gernot,
>>
>> I can confirm that I have similar experience to yours.
>> By the way do you know if one can control from the soft side (register or
>> some other means)
>> the max current output for the car
actual cause.
Regards,
Manu
>
> Regards
> Vagelis
>
>
>
>
> Manu Abraham wrote:
>> Vangelis Nonas wrote:
>>> Hello,
>>>
>>> I tried scanning with the 7201 changeset and I believe the results
>>> are better than the 7205 changeset. In the
Artem Makhutov wrote:
> Hi,
>
> On Sun, Feb 24, 2008 at 05:52:39PM +0400, Manu Abraham wrote:
>> Artem Makhutov wrote:
>>> Hi,
>>>
>>> On Sun, Feb 24, 2008 at 02:18:52AM +0400, Manu Abraham wrote:
>>>> Also, can you please do a benchmark
Tim Hewett wrote:
> Manu,
>
> The Diseqc switch has been removed and now all polarities tune, and
> DVB-S2 works as well.
>
Bad diseqc switch ?
Regards,
Manu
> Thanks!
>
> Tim.
>
>
> On 24 Feb 2008, at 00:38, Manu Abraham wrote:
>
>> Tim
Vangelis Nonas wrote:
> Hello,
>
> I tried scanning with the 7201 changeset and I believe the results are
> better than the 7205 changeset. In the former case I get 2082 services
> on hotbird, in the latter 1722.
>
Hmm.. Ok.
Can you please get 7205 and load the stb0899 and stb6100 modules with
Artem Makhutov wrote:
> Hi,
>
> On Sun, Feb 24, 2008 at 02:18:52AM +0400, Manu Abraham wrote:
>> Also, can you please do a benchmark in lock timings between changeset
>> 7205 and 7200 ?
>
> Do you mean changeset 7200 or 7204
yep. 7205 is head, but just a m
Tim Hewett wrote:
> Manu,
>
> Thanks, it now tunes to horizontal transponders though not vertical
> ones. I think others have been having similar symptoms with the
> mantis/multiproto trees.
Can someone replicate this behaviour: not tuning to vertical transponders ?
Do you have any switches or
iver and a bit of thoughts.
Regards,
Manu
> Regards
> Vagelis
>
>
>
> Manu Abraham wrote:
>> Manu Abraham wrote:
>>
>>> Artem Makhutov wrote:
>>>
>>>> Hi,
>>>>
>>>> On Sat, Feb 23, 2008 at 10:32:58PM +0
Tim Hewett wrote:
> Manu,
>
> I tried the changes, the card is now recognised at boot time without
> needing any manual changes to the code.
>
> However it now no longer tunes:
Sigh! missed out something while i carried forward something. I have
applied the fix to the tree just now. Please try
Tim Hewett wrote:
> Gernot,
>
> I have now tried the mantis tree. It also needed
> the MANTIS_VP_1041_DVB_S2 #define to be changed to 0x0001 for this card,
> but after doing that it was recognised:
>
Applied the ID's to the mantis tree alongwith some other
fixes/optimizations.
Please do test
Manu Abraham wrote:
> Artem Makhutov wrote:
>> Hi,
>>
>> On Sat, Feb 23, 2008 at 10:32:58PM +0100, Artem Makhutov wrote:
>>> On Sun, Feb 24, 2008 at 01:29:31AM +0400, Manu Abraham wrote:
>>>> Are you sure that you got the top level 2 changes changeset 7
Artem Makhutov wrote:
> Hi,
>
> On Sat, Feb 23, 2008 at 10:32:58PM +0100, Artem Makhutov wrote:
>> On Sun, Feb 24, 2008 at 01:29:31AM +0400, Manu Abraham wrote:
>>> Are you sure that you got the top level 2 changes changeset 7204 and 7203
>>> respectively ?
>
Artem Makhutov wrote:
> Hi,
>
> On Sun, Feb 24, 2008 at 12:21:17AM +0400, Manu Abraham wrote:
>> [...]
>> Can you guys please update from the multiproto tree and test again at
>> the earliest and give me your feedback ?
>
> No, still the same:
>
> Try: 50
Artem Makhutov wrote:
> Hi,
>
> On Sat, Feb 23, 2008 at 12:35:49PM +, Vangelis Nonas wrote:
>>> My problems are:
>>> - When I scan the same transponder more than once, sometimes I get some
>>> services, sometimes I get no services.
>
> I have never tried to scan with the SkyStar HD.
>
>>> -
hermann pitton wrote:
> Hi.
> If it stays like that, this will likely have some new owners soon,
> but teach me better.
>
Unfortunately, i updated my mail filters which had tagged all your mails as
junk, to spam status.
Regards,
Manu
___
linux-dvb mai
Gernot Pansy wrote:
> hy,
>
> have you tried some other channel on a diffrent multiplex?
>
> i have also troubles on 2 multiplexes, but i believe that's trough my bad
> signal strength (it's the same on windows).
>
> otherwise there have to be some initialization registers configured
> differe
Simeon Simeonov wrote:
> Hi Gernot,
>
> I can confirm that I have similar experience to yours.
> By the way do you know if one can control from the soft side (register or
> some other means)
> the max current output for the card. I am having a problem when trying to
> tune with a rotor.
> On the
CityK wrote:
> Manu Abraham wrote:
>> CityK wrote:
>>> To be specific, its because the DVB API is about the reception of a
>>> Digital Video Broadcast, and those are made in form of a Transport
>>> Stream modulated onto a RF carrier
>>
>> DVB
CityK wrote:
> James Klaas wrote:
>> On 2/21/08, CityK <[EMAIL PROTECTED]> wrote:
>>
>>> James Klaas wrote:
>>> > HD capture .. HDMI/component/composite
>>> >
>>>
>>> Whether it be done through an analog connection (eg. component) or
>>> digital connection (eg. HDMI/DVI/SDI), it all fall
Stefan Lucke wrote:
> Hi,
>
> with current mulproto driver from http://www.jusst.de/hg/multiproto/ I get
> a reproducable segfault upon start of vdr :-( .
>
> [ 248.480524] stb0899_i2c_gate_ctrl: Enabling I2C Repeater ...
> [ 248.480526] stb0899_write_regs [0xf12a]: c8
> [ 248.480790] _stb0899
Jose Alberto Reguero wrote:
> I have clone the wrong hg:
> http://linuxtv.org/hg/~manu/multiproto/
>
>
> http://www.jusst.de/hg/multiproto/ is ok.
>
I just pulled out some hair for a short while ;-)
Regards,
Manu
___
linux-dvb mailing list
linux-dv
Jose Alberto Reguero wrote:
> I have two problems with the new multiproto tree:
>
> 1. The DVB_API_VERSION_MINOR is 2 like the v4l-dvb tree. Before was 3.
> 2. struct dvbs2_params has no member named 'rolloff'
Umm. from where did you see that ?
I see minor as 3, from here:
http://jusst.de/hg/m
Hi all,
I have updated the multiproto tree and have brought it up to the v4l-dvb
head.
Obviously i haven't tested much after the merge, so please do test.
Maybe there
could be regressions too, though i have tried to be quite careful, so
please proceed
with a bit of caution, as well report any
CityK wrote:
> Manu Abraham wrote:
>> The comment was that this card is identical to the VP-2033, no
>> differences) True it is, the only difference is in the PCI Sub ID's.
>>
>> The demod and the PLL is there at the same I2C addresses too. This was
>> veri
Hi,
Dominik Kuhlen wrote:
> Hi all,
>
> Manus multiproto HG tree (jusst.de/hg/multiproto) and the attached patch make
> the pctv452e work with DVB-S2 and DVB-S :)
>
> Also the LED turns to green if the frontend is openend and turns back to
> orange if released (thanks to manu for postproc inte
Tuomas Jousimaa wrote:
>
> On Jan 24, 2008, at 9:28 PM, Manu Abraham wrote:
>
>> Tuomas Jousimaa wrote:
>>>> Now the only thing that comes to my mind is the CU1216 module is
>>>> using a
>>>> newer TDA10023
>>>> instead
Tuomas Jousimaa wrote:
Now the only thing that comes to my mind is the CU1216 module is using a
newer TDA10023
instead of the TDA10021. (In case, if all your tests went in the right
direction)
Thanks! It is indeed using the TDA10023. I got it working by changing
tda10021_attach into tda10023_at
David BERCOT wrote:
> Hi,
>
> I think the precedent object was not ok ;-)
Too many mails on the same subject.
>
> So, I've installed multiproto for my TT S2-3200. I had a little error :
> dvb_ca adaptor 0: PC card did not respond :(
Try these patches:
http://linuxtv.org/hg/~endriss/v4l-dvb/re
Johannes Stezenbach wrote:
> dvb_dmx_swfilter was written to be used from hardirq
> or softirq context. If it is called from a kernel thread,
> the use of a spinlock is somewhat inappropriate.
>
> Maybe you should talk to the lockdep guys to find out
> what to do about this warning. Maybe a versi
carlos escribano wrote:
> Hello,
>
> I have a DTD adapter from Costar (CST-DT600-MA), as accessory in a Arima
> UM650UV1 laptop. It has a gl861 USB controller, a wjce6353 demuxer
> (recognized as zl10353) and a mxl5003 tuner.
>
> I added their ids to mxl500x brach of mercurial repository and run
Tuomas Jousimaa wrote:
>
> On Jan 21, 2008, at 9:52 PM, Manu Abraham wrote:
>
>> Tuomas Jousimaa wrote:
>>> On Jan 17, 2008, at 8:21 PM, Manu Abraham wrote:
>>>> Tuomas Jousimaa wrote:
>>>>> On Jan 17, 2008, at 7:45 PM, Manu Abraham wrote:
>
Hans Werner wrote:
>
>> Hi all,
>>
>> Can someone test whether the VP-2033 works from this
>> tree: http://jusst.de/hg/mantis
>>
>> Regards,
>> Manu
>>
>
> Sorry, I can't help with the VP-2033.
>
> I was just wondering why the VP-1041 code is not in that tree. I know
> working code exists. Is
Elmar van Ginneken wrote:
> Manu Abraham wrote:
>> Hi all,
>>
>> Can someone test whether the VP-2033 works from this
>> tree: http://jusst.de/hg/mantis
>>
>> Regards,
>> Manu
>
> Hi Manu,
>
> I assume you mean the version dated Friday,
[EMAIL PROTECTED] wrote:
> Hi,
>
> I am running a Hauppauge NOVA-S plus (cx2388x based card) and an older
> technotrend S-1500 card in the same chassis. Trying to debug other problems I
> have turned on lock debugging in the kernel and have started getting the
> following dump when both cards
Hi all,
Can someone test whether the VP-2033 works from this
tree: http://jusst.de/hg/mantis
Regards,
Manu
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Tuomas Jousimaa wrote:
>
> On Jan 17, 2008, at 8:21 PM, Manu Abraham wrote:
>
>> Tuomas Jousimaa wrote:
>>> On Jan 17, 2008, at 7:45 PM, Manu Abraham wrote:
>>>> Tuomas Jousimaa wrote:
>>>>> Hi
>>>>> I just bought the new
Trent Piepho wrote:
> On Sun, 20 Jan 2008, Mauro Carvalho Chehab wrote:
>> On Sat, 19 Jan 2008 05:28:49 -0800 (PST)
>> Trent Piepho <[EMAIL PROTECTED]> wrote:
>>
>>> I wish people would use the patch creating system from Hg, since it would
>>> the format mistakes evident in this patch.
>>>
>>> 1. n
Trent Piepho wrote:
> On Sun, 20 Jan 2008, Akinobu Mita wrote:
+static const char * __devinit card_name(const struct pci_device_id *id)
+{
+ if (id >= bt878_pci_tbl &&
+ id < bt878_pci_tbl + ARRAY_SIZE(bt878_pci_tbl) - 1)
+ return (const char *)id->d
Tuomas Jousimaa wrote:
On Jan 17, 2008, at 7:45 PM, Manu Abraham wrote:
Tuomas Jousimaa wrote:
Hi
I just bought the new Terratec Cinergy C PCI -card. It would seem
that it isn't supported yet by any drivers. With Manus
mantis-drivers recognize the card, but the frontend doesn&#
Tuomas Jousimaa wrote:
> Hi
> I just bought the new Terratec Cinergy C PCI -card. It would seem
> that it isn't supported yet by any drivers. With Manus mantis-drivers
> recognize the card, but the frontend doesn't work.
>
Please do a lspci -vvn and send the result.
Regards,
Manu
Reinhard Nissl wrote:
> Hi,
>
> Morfsta schrieb:
>
>>> Please report the debug output here for further investigation.
>> Attached are two files - tuning to the same DVB-T channel using either
>> system and the Philips frontend... vdr-1.4.x shows the channel fine,
>> 1.5.12 does not.
>>
>> Hope th
Hi all,
For all those who enquired about the MXL500x driver, it is now at
http://linuxtv.org/hg/~manu/mxl500x/
Regards,
Manu
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Marco Coli wrote:
> Manu Abraham ha scritto:
>> Marco Coli wrote:
>>
>>> I think this can be a quick workaround in this situation also. I need to
>>> examine budget-ci.c only?
>>>
>>
>> Yes
>>
> So I did... Now, after
Marco Coli wrote:
> Manu Abraham ha scritto:
>> Marco Coli wrote:
>>
>>>
>>> well well well, mistery revealed!
>>> For the developers: are you already aware of these differences? Do
>>> you need more info? Is support for this board planned?
&
Marco Coli wrote:
> Remy Bohmer ha scritto:
>> Hello Marco,
>>
>>
>>> Can you please post the results of lspci -v concerning your card? Maybe
>>> mine has something different.
>>> Thank you.
>>>
>>> My lspci -v follows:
>>>
>>> 04:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev
David Santinoli wrote:
> On Thu, Dec 27, 2007 at 12:46:38AM +0400, Manu Abraham wrote:
>> David Santinoli wrote:
>>> On Wed, Dec 19, 2007 at 11:49:42PM +0400, Manu Abraham wrote:
>>>>> en50221_app_ai_parse_app_info: Received short data
>>>>>
>&g
Zdenek Kabelac wrote:
> 2008/1/1, Manu Abraham <[EMAIL PROTECTED]>:
>> Zdenek Kabelac wrote:
>>>> There is a OSS driver upcoming, supported by the chip manufacturer
>>>> themselves
>>>> (AFA Technologies.) I have been a bit involved in that proce
Zdenek Kabelac wrote:
> 2008/1/1, Manu Abraham <[EMAIL PROTECTED]>:
>> Zdenek Kabelac wrote:
>>> Hi Manu
>>>
>> There is a OSS driver upcoming, supported by the chip manufacturer themselves
>> (AFA Technologies.) I have been a bit involved in that pro
Zdenek Kabelac wrote:
> Hi Manu
>
> I'd like to hear it clearly - should I safe my time to play with this device?
>
> Do you mean by this answer that you know someone already writes the
> driver for AsusTV Hybrid Volar HX USB device ?
>
> (And driver will be opensource and usable with any kernel
Michael Krufky wrote:
> Manu Abraham wrote:
>> Michael Krufky wrote:
>>
>>> Manu Abraham wrote:
>>>> Some of the vendors (more than one) wrote to me that the TDA18271 driver
>>>> doesn't work. That was the basis of my statement.
>>>
Michael Krufky wrote:
> Manu Abraham wrote:
>> Some of the vendors (more than one) wrote to me that the TDA18271 driver
>> doesn't work. That was the basis of my statement.
>
>
> Silly vendors. Why write to _you_ about somebody else's work?
>
One of th
Steven Toth wrote:
> Manu Abraham wrote:
>> Michael Krufky wrote:
>>> Manu Abraham wrote:
>>>> Zdenek Kabelac wrote:
>>>>
>>>>> 2007/12/31, Michael Krufky <[EMAIL PROTECTED]>:
>>>>>
>>>>>> Zdenek
Michael Krufky wrote:
> Manu Abraham wrote:
>> Zdenek Kabelac wrote:
>>
>>> 2007/12/31, Michael Krufky <[EMAIL PROTECTED]>:
>>>
>>>> Zdenek Kabelac wrote:
>>>>
>>>>> Hello
>>>>>
>>&g
Zdenek Kabelac wrote:
> 2007/12/31, Michael Krufky <[EMAIL PROTECTED]>:
>> Zdenek Kabelac wrote:
>>> Hello
>>>
>>> I should start a new thread about this USB2.0 device.
>>>
>>> I'll repeat which chips I could find in the USB device -
>>> SAA7136E,CY7C68013A,TDA18271HDC1
>>>
>> You should base your
Christoph Pfister wrote:
> Am Mittwoch 26 Dezember 2007 schrieb Steven Ellis:
>> Attached patch is off the dvb-apps mercurial repo for scan.c. This adds
>> the following additional support to the scan tool -
>>
>> 1. H.264 video stream detection - type 0x1b
>> 2. ADTS Audio streams - usually AAC Au
Steven Toth wrote:
> Manu Abraham wrote:
>> Steven Toth wrote:
>>> Luc Brosens wrote:
>>>> all,
>>>>
>>>> so I got the WinTV-CI from Hauppauge. Nice little thing, powered
>>>> through the USB(2)-port.
>>>> On the
David Santinoli wrote:
> On Wed, Dec 19, 2007 at 11:49:42PM +0400, Manu Abraham wrote:
>>> en50221_app_ai_parse_app_info: Received short data
>>>
>> I think, it could be that the stack at some point sends some junk to
>> the device, thereby causing the devic
Marco Coli wrote:
> Hello and Happy Holydays to everyone.
>
> I think I am missing something. In my system I have a working DVB TT
> Card with CI. Now I added a S2-3200.
>
> So i compiled and installed succesfully the new multiproto experimental
> drivers.
>
> After this, I modprobed stb0899 m
CityK wrote:
> Hi folks,
>
> Google summer of code will be rolling around in a couple of months. Now
> I know we've talked a little bit about it before, but I don't recall
> what the thoughts on it were. In any regard, on the surface of things,
> it would seem a perfect opportunity for the Linux
John Goacher wrote:
> Manu Abraham wrote:
>
>>>> John Goacher wrote:
>>>> When i looked at the pctv452 driver it was based on a older stb0899
>>>> driver
>>>> snapshot.
>>>> It still is based on the same ? There were many issue
Steven Toth wrote:
> Luc Brosens wrote:
>> all,
>>
>> so I got the WinTV-CI from Hauppauge. Nice little thing, powered through
>> the USB(2)-port.
>> On the box, is says "Common-Interface extension over USB".
>
> Cool.
>
>> There's software with it, but of course only XP and Vista... which are
preeya wrote:
> Hi,
>
> I am using the matrix ZCAS module to descramble the dvb scrambled
> streams. After the En50221 stack is initialized the module is creating
> the sessions with the resource manager resource, application information
> resource, conditional access resource and MMI resource b
with almost any random
architecture can be implemented with this style, the definitions
inside the switch statement can be easily adapted for any card, thereby
eliminating the need for any additional ioctls.
Manu
> Greetings,
> Ben
>
> -Original Message-
> From: Manu Abraham
Martin Drab wrote:
> On Wed, 19 Dec 2007, Manu Abraham wrote:
>
>> Martin Drab wrote:
>>> Hi,
>>>
>>> what is the current state of the Linux driver for SAA7162? Has there been
>>> any progress so far? Is there somewhere at least something to tes
bbee wrote:
> Hi Manu,
>
> Hmm, is there no way to detect at runtime which cards would need the
> fix? Something must have changed on the card itself, even if the pci id
> hasn't.
> Wouldn't like to have to keep making this change in every kernel I
> compile..
I will try to make it a parameter o
David Santinoli wrote:
> On Wed, Dec 19, 2007 at 02:24:41AM +0400, Manu Abraham wrote:
>> David Santinoli wrote:
>>> I've got a VP1032 CI card (PCI id 1822:0001), a Cryptoworks module
>>> by SCM, and a regular JSTV (Japanese satellite TV) subscription, but
>
John Goacher wrote:
> Manu Abraham wrote:
>
>> John Goacher wrote:
>>> Tony Grant wrote:
>>>
>>>> Le vendredi 14 décembre 2007 à 13:49 +, John Goacher a écrit :
>>>>
>>>>> Your success with Das Erste prompted me to
>>
1 - 100 of 730 matches
Mail list logo
