Hello,
>I would imagine that is usually to reduce costs. I assume that the buyers
>for the companies are always trying to negotiate lower prices to increase
>profit margins, and playing the various chip suppliers off against each
>other to shave a few cents off the components. If Dibcom refuse
Hi,
> By someone, do you mean me?
Steve you can answer this Question if you want.
BR.
Halim
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
his
> > patch? If it is in fact not a saa7136, what driver is it?
>
> The patch does fix the problem, thanks!
>
> - Hartmut
>
> ___
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/c
Hi,
Is there a chance to grab the audio out and play it over a std soundcard?
The old wintv pci cards had such a alsa module and I could get audio stream
without connecting the two cards with an audio cable.
Any chance to get this working?
Thanks
Halim
--
Halim Sahin
E-Mail
Hi,
I can not compile the hg tree under 2.6.16 kernel
/tmp/v4l-dvb/v4l/pvrusb2-sysfs.c: In function 'class_dev_create':
/tmp/v4l-dvb/v4l/pvrusb2-sysfs.c:800: error: 'struct device' has no
member name
/tmp/v4l-dvb/v4l/pvrusb2-sysfs.c: In function 'pvr2_sysfs_class_create':
/tmp/v4l-dvb/v4l/pvrusb2
hi,
how can I checkout an older version of the hg stuff?
Do I need a revision number or is it possible to give a date?
Please give me an example.
Thanks
--
Halim Sahin
E-Mail:
halim.sahin (at) t-online.de
___
linux-dvb
Hi,
I have a technisat receiver and my vdrbox for watching tv.
Vdr box has a technotrend tt 2300.
Problem:
The vdr box can not receive some channels.
The Technisat receiver has no problems with this when I connect it to
the same cable.
This morning I tried to connect my vdr box with a loop thro
Hello all,
I sthere a list for scan and astra 23 available???
Halim
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
__
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
Halim Sahin
E-Mail:
halim.sahin (at) t-online.de
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi,
Is this device well working under linux especially with vdr?
I found some stuff in the archive that says the devices should work but
there are not much messages written about this.
So I wanted to ask before buying it from dvbshop.
Is this an usb-2.0 box or is usb 1.1 enough for it?
Thanks a l
Hi,
On So, Mär 04, 2007 at 01:32:34 +0100, Nico Sabbi wrote:
> Nico Sabbi wrote:
> that tuned next to nothing) had the same demodulator as the Airstar2
> (the mt352);
> this fact alone says a lot about the quality of the single tuners
Afaik the twinhan dtv alpha stick has the same frontend!
Best
Hi,
Have a look to the twinhan dtv alpha stick.
(OLDVERSION)
There are some fw problems reported in this list to the new Version of
this device.
HTH
Halim
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinf
Hi,
Is there a working driver for this device?
I want to downgrade my kernel because I am getting ts continuty errors
in vdr1.4.4 but my signal is not too bad.
The same cable connected to a technisat skystar2.6b works fine.
I tested several things fw/driver combination, latency_timer, recording
Hello
I found this in my syslog:
dvb-ttpci: __av7110_send_fw_cmd(): timeout
waiting for COMMAND
idle
dvb-ttpci: av7110_send_fw_cmd(): av7110_send_fw_cmd error -110
dvb-ttpci: av7110_fw_cmd error -110
What is the reason for this?
I am searching what causes my ts-continuity errors while recording
Hi,
My vdr machine with an tt dvb-s card and a twinhan vp7045
based usb stick freezes sometimes when I use athcool.
I am not shure that this problem is hardware spesific or not.
After unpluging the twinhan stick the machine works very well.
So I thaught that could be a problem with the dvb-usb-vp
Hi,
This module increases cpuload using it with vdr-1.4.
My HTPC has one ff card and one dvb-t (twinhan). usb stick.
Without dvb-t the load is about 0.20.
After loading the vp7045 and restart of vdr the load is about 0.60.
Is this vdr's fault or perhaps a bug in the vp-7045 module?
Best regards.
dding new transponders etc and I don't
want to edit the list every week because the turkish broatcaster often
change the transponders.
Isn't there another scan utility?
What about home sat receivers?
They don't need anything after a channelscan!!!
Please help.
Thanks
Hello,
I am getting wrong vallues like this:
>>> tune to: 11025:v:S0.0W:6510: (tuning failed)
should be:
>>> tune to: 11025:v:S42.0E:6510: (tuning failed)
How can I correct this??
Thanks
Halim
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www
18 matches
Mail list logo
