Darron Broad pointed me to the patches available at
http://dev.kewl.org/hauppauge/ (get the sfe version for the 1300). The
patches applied cleanly about the v4l main tree mercurial source.
That fixed the problem. both ir-kbd-i2c and lirc-i2c detect and initialize the
IR receiver on the HVR13
CityK wrote:
> Russell Kliese wrote:
>> I've posted a picture of my card at the following URL:
>> http://ringo.com/photos/photo.html?photoId=253664472 . The chipset
>> includes: Philips TDA10046A digital decder, Philips SAA7131E analog
>> decoder and a 8275AC1 tuner.
>
> Hi Russell,
> could you ple
Hartmut Hackmann wrote:
> Hi, all
>
> Russell Kliese schrieb:
>
>> Nico Sabbi wrote:
>>
>>> On Thursday 07 February 2008 14:39:44 Russell Kliese wrote:
>>>
>>>
>>>
Analog TV worked without a problem (even with the older drivers).
There is still a problem with the di
On 21:08 Fri 01 Feb 2008, James Klaas wrote:
> On 1/31/08, Brandon Philips <[EMAIL PROTECTED]> wrote:
> > On 18:33 Thu 31 Jan 2008, James Klaas wrote:
> > > I was hoping to get my webcam working with the latest v4l-dvb sources.
> > > After reading about on this list and elsewhere, I ran:
> > >
> >
Ysangkok wrote:
> Hello,
>
> I've just bought an Sandberg DigiTV USB DVB-T receiver.
>
> I found out using lsusb that it contained an Afatech AF9016.
It is AF9015.
Looks like firmware you have tried is bad. Download correct one from here:
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware
Hello,
I've just bought an Sandberg DigiTV USB DVB-T receiver.
I found out using lsusb that it contained an Afatech AF9016.
# lsusb -v -s 5:10
Bus 005 Device 010: ID 15a4:9016
Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass
Hi,
ok some success.
http://www.linuxtv.org/v4lwiki/index.php/Trident_TM6000
I changed the idVendor to 13d3 and idProduct to 3213.
Build it and the modprobe says:
"couldn't attach zl10353"
Yes right, no zl10353 demodulator.
Hmm and now ??
Some strings from windows driver.
[snip]
Hw_Factory_Check
Hi,
Hartmut Hackmann wrote:
> ...
> So here is the patch that make the the 22kHz tone a config option.
> Please be aware that i have no means to test it, so please report
>
> Signed-off-by: Hartmut Hackmann <[EMAIL PROTECTED]
Acked-by: Oliver Endriss <[EMAIL PROTECTED]>
CU
Oliver
--
-
Hello, help!
I can "dvbscan" and "tzap", and gets indication of a good signal. BUT,
I cant view the video!
(from the dvb device)
Also "dvbdate" command works (that returns time and date from the air, I
presume). But not a command as "dvbsnoop" (that need
"/dev/dvb/adapter0/dvr").
A sample: (
Hi, all
Russell Kliese schrieb:
> Nico Sabbi wrote:
>> On Thursday 07 February 2008 14:39:44 Russell Kliese wrote:
>>
>>
>>> Analog TV worked without a problem (even with the older drivers).
>>>
>>> There is still a problem with the digital decoder. Sometimes it
>>> works fine (I can scan for c
I'm having a problem with out of order packets using MPE on the HVR4000.
The timestamp in the packet headers shows they are received in the right
order, however every now and then they will come off the stack out of
order. Check out the attached packet capture, packet 32 is the first
out of order
Am Donnerstag, 7. Februar 2008 schrieben Sie:
> @Peter:
> 1. Maybe you want to start a page in the wiki dedicated to your card.
> Or should we check for similarity and merge both of these cards into one
> page?
>
> At least I am interested in the eeprom content of your card.
>
> I should request so
Hi Hartmut,
I've applied your patch against latest v4l-dvb tree and the tuning
problems with my Technotrend S-1401 (thread "TT-1401 budget card support
broken since 2.6.24-rc6" on the list) are gone. Thanks!
Best Regards
Dirk
Hartmut Hackmann schrieb:
> Hi
>
> hermann pitton schrieb:
>> Am Mit
Acked-By: Patrick Boettcher <[EMAIL PROTECTED]>
Patrick.
On Thu, 7 Feb 2008, Hartmut Hackmann wrote:
> So here is the patch that make the the 22kHz tone a config option.
> Please be aware that i have no means to test it, so please report
>
> Signed-off-by: Hartmut Hackmann <[EMAIL PROTECTED]
>
>
On Thu, 07 Feb 2008 20:29:15 +
"Richard (MQ)" <[EMAIL PROTECTED]> wrote:
> Richard (MQ) wrote:
> > Mauro Carvalho Chehab wrote:
> >> "Richard (MQ)" <[EMAIL PROTECTED]> wrote:
> tuner: Unknown parameter `tuner_xc2028'
> >> Hmm... I suspect you did something wrong at modprobe.conf.local. It
Yep, it's horrible. This is what I did, the adapters 0,1,2 are still
there but MythTV is configured to used 4,5 and 6.
# My own DVB hell
# Twinhan DVB-S Card
#
KERNEL=="dvb[0-9].frontend0", ATTR{dev}=="212:3",
symlink+="dvb/adapter4/frontend0", GROUP="video"
KERNEL=="dvb[0-9].demux0", ATTR{dev}==
Richard (MQ) wrote:
> Mauro Carvalho Chehab wrote:
>> "Richard (MQ)" <[EMAIL PROTECTED]> wrote:
tuner: Unknown parameter `tuner_xc2028'
>> Hmm... I suspect you did something wrong at modprobe.conf.local. It seems
>> that
>> it is using tuner_xc2028 as a parameter to tuner module.
>>
>> What w
Hi,
Thank you. This is what I finally did (blacklisting and manually
loading), as the udev rules have a really "ugly" syntax ;). I found the
tip in Gentoo wiki and it's working fine now.
Thank you all anyway.
Eduard
En/na Matthias Schwarzott ha escrit:
On Donnerstag, 7. Februar 2008,
Hi, Matthias
Both lspci and dmesg EEPROM dump are exactly the same as the wiki.
Anyway, let's go with some feedback:
I've been trying the card with your patch. Apparently the adaptor
nodes are created (I solved yet the ordering issue), but I've been
unable to find any channel by using nei
John Drescher wrote:
> On Feb 7, 2008 11:46 AM, Eduard Huguet <[EMAIL PROTECTED]> wrote:
>> Hi,
>> I currently have a media center computer set up using Gentoo 64 bit
>> and a Hauppauge Nova-T 500 card (dual DVB-T receiver). Now I'm trying to
>> add a new card (DVB-S), and here my problems begi
On Feb 7, 2008 12:38 PM, Henry Leinhos <[EMAIL PROTECTED]> wrote:
> I'm not sure which modules are required, but when I load the cx23885 module
> (via /sbin/modprobe cx23885), I get an error on the tveeprom header. dmesg
> reports:
>
> CORE cx23885[0]: subsystem: 0070:7911, board: Hauppauge WinTV
Hi,
I recently acquired a Hauppauge wintv-hvr-1250 PCIe ATSC tuner card and have
compiled/installed the latest v4l-dvb drivers ok.
(BTW, I'm using an ABIT AN-M2HD motherboard with an AMD 4000+ cpu)
I'm not sure which modules are required, but when I load the cx23885 module
(via /sbin/modpro
On Donnerstag, 7. Februar 2008, Eduard Huguet wrote:
> Hi,
> ¿Have you been able to make the DVB-S part work, so? I've been
> trying these days using ZZam's patch only (Tino's one also mentioned in
> the wiki doesn't apply for now), and I was completely unable to get a
> lock on any frequency.
On Donnerstag, 7. Februar 2008, John Drescher wrote:
> On Feb 7, 2008 11:46 AM, Eduard Huguet <[EMAIL PROTECTED]> wrote:
> > Hi,
> > I currently have a media center computer set up using Gentoo 64 bit
> > and a Hauppauge Nova-T 500 card (dual DVB-T receiver). Now I'm trying to
> > add a new car
Andreas Lorenz wrote:
> i'm owning such a card. And i'm searching a driver for it.
> I have no skills in programming driver but i wan't to help.
>
> What can i do?
See http://linuxtv.org/wiki/index.php/Supported_Hardware
___
linux-dvb mailing list
linu
On Feb 7, 2008 11:46 AM, Eduard Huguet <[EMAIL PROTECTED]> wrote:
> Hi,
> I currently have a media center computer set up using Gentoo 64 bit
> and a Hauppauge Nova-T 500 card (dual DVB-T receiver). Now I'm trying to
> add a new card (DVB-S), and here my problems begin: not mentioning the
> exp
> Do you have a way to automate this ? Ie to detect that a tuner is gone ?
No, I have yet to find any log message that says things aren't OK.
Mythbackend seems to just fail its recordings and not create the
recording file, which is kind of annoying. In my point of view, it would
be better if myth
Hi,
I currently have a media center computer set up using Gentoo 64 bit
and a Hauppauge Nova-T 500 card (dual DVB-T receiver). Now I'm trying to
add a new card (DVB-S), and here my problems begin: not mentioning the
experimental state of the driver (this is a different story that doesn't
ma
Am Donnerstag, 7. Februar 2008 schrieb Eduard Huguet:
> Hi,
> ¿Have you been able to make the DVB-S part work, so? I've been
> trying these days using ZZam's patch only (Tino's one also mentioned in
> the wiki doesn't apply for now), and I was completely unable to get a
> lock on any frequency.
Hello,
i'm owning such a card. And i'm searching a driver for it.
I have no skills in programming driver but i wan't to help.
What can i do?
Kind regards,
bysis
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailm
Just a thought about some possible "consolidation / elimination of
fragmentation / consistency " meant to benefit the end user. How about
adding to the get_dvb_firmware script (
http://linuxtv.org/hg/v4l-dvb/file/tip/linux/Documentation/dvb/get_dvb_firmware
) a section for:
a) XC5000 firmwar
I demand that ashim saikia may or may not have written...
> Thanks... I will keep track of these things
>
> - Original Message
> From: Nicolas Will <[EMAIL PROTECTED]>
[snip]
>
> Ashim,
>
> Regarding
> all
> your
> posts:
[snip]
This is the second posting with one-word-per-line m
umpte:
[linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]
De:
Peter Meszmer <[EMAIL PROTECTED]>
Data:
Thu, 7 Feb 2008 10:23:27 +0100
Per a:
linux-dvb@linuxtv.org
Per a:
linux-dvb@linuxtv.org
Hello,
I'm watching this list for quite a while now, looking forward to see my
Avermedia AVer
Hi Jonas,
> You don't need to reboot to regain the other tuner. I use the following:
Do you have a way to automate this ? Ie to detect that a tuner is gone ?
Christophe.
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/
Russell Kliese wrote:
> I just wanted to report on my progress with the MSI [EMAIL PROTECTED] A/D card
> v1.1 in case anyone has some ideas that might help getting this card
> working 100%.
>
> I've posted a picture of my card at the following URL:
> http://ringo.com/photos/photo.html?photoId=25366
Nico Sabbi wrote:
> On Thursday 07 February 2008 14:39:44 Russell Kliese wrote:
>
>
>> Analog TV worked without a problem (even with the older drivers).
>>
>> There is still a problem with the digital decoder. Sometimes it
>> works fine (I can scan for channels and can run tzap to view a
>> chan
On Thursday 07 February 2008 14:39:44 Russell Kliese wrote:
> Analog TV worked without a problem (even with the older drivers).
>
> There is still a problem with the digital decoder. Sometimes it
> works fine (I can scan for channels and can run tzap to view a
> channel using mplayer). However, so
I just wanted to report on my progress with the MSI [EMAIL PROTECTED] A/D card
v1.1 in case anyone has some ideas that might help getting this card
working 100%.
I've posted a picture of my card at the following URL:
http://ringo.com/photos/photo.html?photoId=253664472 . The chipset
includes: Phil
forgot to add. I've tried the current hg sources of both the main v4l
repo and the hvr1300 specific repo. neither works.
Rajesh
Rajesh Balan wrote:
> Hi,
>
> my new HVR-1300 is not being detected by the ir_kbd_i2c.ko module. I've
> tracked down the relevant info in the ir_probe component of th
Hi,
my new HVR-1300 is not being detected by the ir_kbd_i2c.ko module. I've
tracked down the relevant info in the ir_probe component of the module.
ir-kbd-i2c: in ir_probe. adap->id=40004
ir-kbd-i2c: in ir_probe. adap->id=1001b
ir-kbd-i2cprobe 0x18 @ cx88[0]: no
ir-kbd-i2cprobe 0x6b @ cx88[0]: n
Mauro Carvalho Chehab wrote:
> "Richard (MQ)" <[EMAIL PROTECTED]> wrote:
>>> tuner: Unknown parameter `tuner_xc2028'
>
> Hmm... I suspect you did something wrong at modprobe.conf.local. It seems that
> it is using tuner_xc2028 as a parameter to tuner module.
>
> What we need is to have a paramete
On Wed, 06 Feb 2008 18:49:51 +
"Richard (MQ)" <[EMAIL PROTECTED]> wrote:
> Mauro Carvalho Chehab wrote:
> > I need the tuner-xc2028 dmesg.
> >
> > Please, add this to /etc/modprobe.conf:
> > options tuner debug=1
> > options tuner-xc2028 debug=1
>
> Added to /etc/modprobe.conf.local per SuSE
ssumpte:
[linux-dvb] AVerMedia DVB-S Hybrid+FM and DVB-S Pro [A700]
De:
Peter Meszmer <[EMAIL PROTECTED]>
Data:
Thu, 7 Feb 2008 10:23:27 +0100
Per a:
linux-dvb@linuxtv.org
Per a:
linux-dvb@linuxtv.org
Hello,
I'm watching this list for quite a while now, looking forward to see my
Avermedia AV
Thanks... I will keep track of these things
- Original Message
From: Nicolas Will <[EMAIL PROTECTED]>
To: Linux Forum 4 Dvb
Sent: Thursday, February 7, 2008 3:26:22 PM
Subject: Re: [linux-dvb] DVB-S card-Which firmware
Ashim,
Regarding
all
your
posts:
I
suggest
that
you
do
s
Ashim,
Regarding all your posts: I suggest that you do some reading first.
Here are a few places that may be of interest to you:
Compiling the v4l-dvb tree:
http://linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers
Firmware:
http://linuxtv.org/wiki/index.php/Firmware
DVB-S:
http:/
ashim saikia wrote :
> I am using DVB-S card.
>
Which one ? There are dozens of DVB-S cards ... Some need firmware,
others not.
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I am using a DVB-S card. Can anybody suggest which firmware to use
Looking for last minute shopping deals?
Find them fast with Yahoo! Search.
http://tools.search.yahoo.com/newsearch/category.php?cate
Hello,
I'm watching this list for quite a while now, looking forward to see my
Avermedia AVerTV DVB-S Hybrid+FM supported.
This card looks very similar to the Avermedia AVerTV DVB-S Pro [A700], so I
tried the two existing patches. Finally, Matthias Schwarzott's (zzam)
patch "a700_full_20080204
I have obtained a linuxtv-dvb-1.1.1.tar.bz2 source and tried to compile the
source files in linuxtv-dvb-1.1.1/build2.6/.
Executing make gives the following error:-
/linuxtv-dvb-1.1.1/build-2.6/dvbdev.c:384: error: expected â)â before string
constant
make[2]: *** [/linuxtv-dvb-1.1.1/build-2.6/dvb
Hi all,
I occasionally have the problem with the remote that the device nodes
disappear. Has anyone else experienced this? Is there an easy fix?
Cheers,
Bonne
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listin
50 matches
Mail list logo
