Hi,
it seems, that current (CVS) dvb-kernel (2.6/2.4) drivers work properly over
several hours, if hyperthreading is disabled (SMP kernel reports a single CPU).
But with hyperthreading enabled, it happens quickly, that my system freezes.
The tests I've done so far showed, that it is necessary to
Hi, I'm a colleage of Gert-Jan and now also busy with the streaming from
hardware device driver.
We switched over to Suse9.0 and Linux Tv DVB driver 1.1.1.
The data in the transport stream on the disc is now sent to our front end
transport stream device driver, which copies the data via the DVB f
This may occur if you do not have the correct permissions set on your
devices, try running kaxtv as root, ifit works, then you need to refer
to the devfsd/udev documentation on how to make rules to change the
perms so that normal users can access them!
Regards
Rick
Jean-Claude Repetto wrote:
Ch
hello there,
I am trying for some days having my WinTV Nova CI descrambling... but
with no results.
First problem comes with the CAMs:
1. Matrix reloaded CAM does not work (see attached mr.txt)
2. Viaccess decryption CAM does not work too (see attached viaccess.txt)
3. Aston v1.05 is properly in
> patch for get diseqc working.
Thanks again for your help.
> i get unknown IOCTL (0xC0307653) ??
At what point and under what conditions?
> scan and szap is working, but vdr ends with "usb_control/bulk timeout"
With scan running you can use the dvr device successfully?
Is it definitely this:
Hello guys, I'm tring lateast dvb-kernel driver from CVS with Nova CI + Aston CAM.
I get This output. Is it possible fix the problem?
Dmesg tell me that CAM is initialized when use load options...will work same?
(I test system at friend Home becouse I haven't satellite parabola)
Linux Kernel 2.6.
Alex Woods wrote:
On Wednesday 28 Apr 2004 14:57, Johannes Stezenbach wrote:
Ernst Peinlich wrote:
--- ttusb_dec.c.org 2004-03-31 11:55:34.0 +0200
+++ ttusb_dec.c 2004-04-28 10:01:31.0 +0200
@@ -1659,7 +1659,7 @@
p->u.qam.symbol_rate);
dprin
Hello,
On 30.04.2004 23:23, Stephan Böni wrote:
Nice. xawtv works now (i have to use the "-nogl" flag), but only without any
channel.
I have a channel.conf file after installing vdr 1.2.6. When i try to execute
vdr an error occures:
# vdr
vdr: no primary device found - using first device!
Do i
Apart from almost topping myself as a result of the stress I discovered
an interesting fact to do with the AV7110 ARM processor.
It seems that if there is some sort of problem with the connection to
J2 (not sure whether it's a short or something else) you will get
problems with uploading the fi
Marcus Metzler wrote:
> There is a software patent on CSA. So implementing it will probably
> cause trouble, although you may succeed in voiding the patent after a
> lengthy trial.
But how about using a full-featured card (and a card reader)? Isn't the CSA
algorithm implemented in the firmware i
Hi,
I noticed using tcpdunp on dvb0_0 confuses the dvb driver.
Avoid using tcpdump (If you use it you stop receiving bytes).
P.S. You say you are using dvbtune. I use szap to tune and dvbnet to
bring up dvb0_0.
I never used dvbtune, but I think you should use dvbnet.
Il ven, 2004-04-30 alle 14:
Christophe Thommeret wrote:
KaxTV is a software desktop DVB player.
I can compile with no problems under Linux 2.6.5, but at run time I get the following
error :
"Can't determine DVB type. Aborting".
I have only one DVB card (Nexus), and an analog TV card (BT848).
The DVB card is not used by anoth
12 matches
Mail list logo
