Dear Experts,
My question is more general and concerns differences between the
CI in NOVA/Budget and ff/Premium cards since I have difficulty
understanding
the difference between the two cards.
The CI does not work with NOVA (yet:) but CI works with ff cards because
there is implementation of
The board revision is E 03/2003
It has the following chips:
About 1cm square
NxtWave communications
Nxt 6000
DD8376
1A1 0304
About 2cm x 1.5cm
CONEXANT
FUSION 878A
25878-13
E332413.1
0308 TAIWAN
Robert
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Ho
Robert Cook wrote:
The markings on the outside of the tuner under the DigiTV label are:
TDED4-504A
TDED4-504A
352226A
MADE IN JAPAN
On the inside there appears to be two chips identical I think. They are
about 13mm long x 2mm wide and 4mm high. It looks like they have 5 pins
with the following mar
The markings on the outside of the tuner under the DigiTV label are:
TDED4-504A
TDED4-504A
352226A
MADE IN JAPAN
On the inside there appears to be two chips identical I think. They are
about 13mm long x 2mm wide and 4mm high. It looks like they have 5 pins
with the following markings:
EPCOS X725
Alex Woods wrote:
On Sunday 25 January 2004 7:05 pm, Holger Waechtler wrote:
Do we want to add ttusb_dec.o to the insmod.sh script? Might this cause
any side-effects?
I guess so. Shouldn't be any side-effects.
ok, I added it, can you please test?
thanks,
Holger
--
Info:
To unsubscribe send a
Hi,
On Sunday 25 January 2004 20:20, [EMAIL PROTECTED] wrote:
> From: Gareth Jeanne <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Sent: Sun, 25 Jan 2004 12:13:25 -0800
> Subject: Re: [linux-dvb] Re: dec2000-t seen as USB-Nova
>
> I just tried adding it to the insmod.sh script ran it and as far as
From: Gareth Jeanne <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Sun, 25 Jan 2004 12:13:25 -0800
Subject: Re: [linux-dvb] Re: dec2000-t seen as USB-Nova
I just tried adding it to the insmod.sh script ran it and as far as i
can tell all is ok. Just one problem, there is not file for my
transmit
On Sunday 25 January 2004 7:05 pm, Holger Waechtler wrote:
>
> Do we want to add ttusb_dec.o to the insmod.sh script? Might this cause
> any side-effects?
I guess so. Shouldn't be any side-effects.
Cheers,
Alex
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-
Alex Woods wrote:
On Sunday 25 January 2004 5:22 pm, [EMAIL PROTECTED] wrote:
I have compiled and installed the drivers. I then ran ./insmod.sh
as expected there where some errors as it loaded all modules.
I then ran dmesg but the result was
saa7146: register extension 'dvb'.
saa7146: register
On Sunday 25 January 2004 5:22 pm, [EMAIL PROTECTED] wrote:
> I have compiled and installed the drivers. I then ran ./insmod.sh
>
> as expected there where some errors as it loaded all modules.
>
> I then ran dmesg but the result was
>
> saa7146: register extension 'dvb'.
> saa7146: register extens
I have compiled and installed the drivers. I then ran ./insmod.sh
as expected there where some errors as it loaded all modules.
I then ran dmesg but the result was
saa7146: register extension 'dvb'.
saa7146: register extension 'dudget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: r
I have a Hauppauge DVR2000-t Having finally got the dvb-kernel drivers
to compile and install i have been trying to use Scan to find channels,
but it keeps complainig it can't find /dev/dvb/adapter/frontend0 i have
created this during the install process using mknod and i have chmod
755 but Sca
Is it possible to find specifications on these two
circuits?
TI TMX320AV7111GFN
Micronas MSP3403
If anyone have them or know where to find them,
please contact me.
/Anders
MartÄn van de Streek wrote:
On Sun, 25 Jan 2004, Johannes Stezenbach wrote:
Lars Fredriksson wrote:
Scan-config for DVB-T, Gavle - Sweden, maybe this could be included in the
driver?
Commited to dvb-apps.
Here's nl-AlphenaandenRijn:
---SNIP---
# Digitenne (Alphen aan den Rijn, The Netherlands
[EMAIL PROTECTED] wrote:
Help!!
Whenever i try to compile the 2.4 version drivers it complains that my
Kernel does not have module loading enabled. It Does though!!
Does anyone know why this is/a way around this.
I found a person with the same problem in in list archive and they had
solved the pr
Johannes Stezenbach wrote:
Klaus Schmidinger wrote:
I was looking into why the driver doesn't recover after a loss
of signal (like when pulling the antenna cable for a few seconds)
and found that apparently (at least with DVB-S) it starts a
dvb_frontend_recover() sequence, but aquires a lock at a
On Sun, 2004-01-25 at 14:37, Lauri Tischler wrote:
> Appears that tuxbox uses frontend command fp_ioctl_get_lnb_current
> Is that tuxbox home-made special ?
Yes.
> anything similar in normal dvb ?
No.
Regards,
Andreas
signature.asc
Description: This is a digitally signed message part
Robert Cook wrote:
I had my Nebula DigiTV card working before a reinstall. The only
difference is the latest video4linux2 and dvb-kernel modules were used
in the reinstall.
I am running Mandrake 9.2 with a 2.4.23 kernel. Video4Linux downloaded
and installed. dvb-kernel downloaded and installed
On Sun, 25 Jan 2004, Johannes Stezenbach wrote:
> Lars Fredriksson wrote:
> > > Scan-config for DVB-T, Gavle - Sweden, maybe this could be included in the
> > > driver?
>
> Commited to dvb-apps.
Here's nl-AlphenaandenRijn:
---SNIP---
# Digitenne (Alphen aan den Rijn, The Netherlands)
# T freq b
Klaus Schmidinger wrote:
> I was looking into why the driver doesn't recover after a loss
> of signal (like when pulling the antenna cable for a few seconds)
> and found that apparently (at least with DVB-S) it starts a
> dvb_frontend_recover() sequence, but aquires a lock at a completely
> differe
Help!!
Whenever i try to compile the 2.4 version drivers it complains that my
Kernel does not have module loading enabled. It Does though!!
Does anyone know why this is/a way around this.
I found a person with the same problem in in list archive and they had
solved the problem. Unfortunatley i co
Gerhard Steiner wrote:
> Is there a way to acess this "scrolling out"-feature from within vdr via
> api?
You cannot remove the copyright message via the API, but it's just
a window with one line of text which is moved around the screen.
You can do that using the OSD API.
Johannes
--
Info:
To u
Lars Fredriksson wrote:
> > Scan-config for DVB-T, Gavle - Sweden, maybe this could be included in the
> > driver?
Commited to dvb-apps.
Thanks,
Johannes
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi again!
Sorry, but I missed one line in the last post ;-) Here is is the complete
one:
# Gavle (Senda/Boxer Sweden)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
T 67400 8MHz 2/3 NONE QAM64 8k 1/8 NONE
T 49800 8MHz 2/3 NONE QAM64 8k 1/8 NONE
T 56200 8
Hi!
Scan-config for DVB-T, Gavle - Sweden, maybe this could be included in the
driver?
dvb-t/se-Gavle
# Gavle (Senda/Boxer Sweden)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
T 67400 8MHz 2/3 NONE QAM64 8k 1/8 NONE
T 49800 8MHz 2/3 NONE QAM64 8k 1/8 NONE
Appears that tuxbox uses frontend command fp_ioctl_get_lnb_current
Is that tuxbox home-made special ?
anything similar in normal dvb ?
--
[EMAIL PROTECTED]
60.2N 24.7E
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
I was looking into why the driver doesn't recover after a loss
of signal (like when pulling the antenna cable for a few seconds)
and found that apparently (at least with DVB-S) it starts a
dvb_frontend_recover() sequence, but aquires a lock at a completely
different frequency, which is some 16MHz o
> Gerhard Steiner writes:
> > Hello,
> >
> > at startup of the driver there is a little copyrigth message "(c) 2001
> > Convergence integrated media", that scrolls out of the screen.
> > Sometimes if vdr start fast enough, the channel info is scroll out.
> >
> > I tried to find where in th
Gerhard Steiner writes:
> Hello,
>
> at startup of the driver there is a little copyrigth message "(c) 2001
> Convergence integrated media", that scrolls out of the screen.
> Sometimes if vdr start fast enough, the channel info is scroll out.
>
> I tried to find where in the driver this me
Hello,
at startup of the driver there is a little copyrigth message "(c) 2001
Convergence integrated media", that scrolls out of the screen.
Sometimes if vdr start fast enough, the channel info is scroll out.
I tried to find where in the driver this message is written to the screen
and how to scr
30 matches
Mail list logo
