Hi Doug
On 3/20/2018 9:47 PM, Doug Anderson wrote:
> Hi,
>
> On Tue, Mar 20, 2018 at 3:16 PM, Sagar Dharia wrote:
>> + pinconf {
>> + pins = "gpio55", "gpio56";
>> + drive-strength = <2>;
>> +
Hi,
On Tue, Mar 20, 2018 at 3:16 PM, Sagar Dharia wrote:
> + pinconf {
> + pins = "gpio55", "gpio56";
> + drive-strength = <2>;
> + bias-disable;
> +
Hi,
On 3/19/2018 5:56 PM, Doug Anderson wrote:
> Hi,
>
> On Mon, Mar 19, 2018 at 3:15 PM, Sagar Dharia wrote:
+ pinconf {
+ pins = "gpio55", "gpio56";
+ drive-strength = <2>;
+
Quoting Doug Anderson (2018-03-19 16:56:27)
> On Mon, Mar 19, 2018 at 3:15 PM, Sagar Dharia wrote:
> >
> > Yes, we typically have a "platform(sdm845 here)-qupv3.dtsi" defining
> > most of the serial-bus instances (i2c, spi, and uart with
> > status=disabled) that we include from the common header.
Hi,
On Mon, Mar 19, 2018 at 3:15 PM, Sagar Dharia wrote:
>>> + pinconf {
>>> + pins = "gpio55", "gpio56";
>>> + drive-strength = <2>;
>>> + bias-disable;
>>> + };
Hi Doug,
Thanks for reviewing the patch.
On 3/16/2018 5:54 PM, Doug Anderson wrote:
> Hi,
>
> On Wed, Mar 14, 2018 at 4:58 PM, Karthikeyan Ramasubramanian
> wrote:
>> Add I2C master controller support for a built-in test I2C slave.
>>
>> Signed-off-by: Karthikeyan Ramasubramanian
>> ---
>> arc
Hi,
On Wed, Mar 14, 2018 at 4:58 PM, Karthikeyan Ramasubramanian
wrote:
> Add I2C master controller support for a built-in test I2C slave.
>
> Signed-off-by: Karthikeyan Ramasubramanian
> ---
> arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 19 +++
> arch/arm64/boot/dts/qcom/sdm845.d
Add I2C master controller support for a built-in test I2C slave.
Signed-off-by: Karthikeyan Ramasubramanian
---
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 19 +++
arch/arm64/boot/dts/qcom/sdm845.dtsi| 29 +
2 files changed, 48 insertions(+)
diff --
