On Thursday 18 August 2005 07.57, Aaron Mehl wrote:
> Hi all,
>
> I am having some challenges getting grace notes to do
> what I intended, with lyrics and also in combination.
>
>
> The first case is as follows:
>
> g'2\grace a'8( g'2 ) | g'2
> ya-leh
Please give full
Do you want the percent signs already from the firs measure of the
piece? Otherwise, just do
\repeat percent 5 { previous measure }
Isn't this what you actually want to describe anyway? I don't understand
what you intend to use it for otherwise.
Example, a C major scaled followed by 4 bars of repe
On 17-Aug-05, at 10:57 PM, Aaron Mehl wrote:
The first case is as follows:
g'2\grace a'8( g'2 ) | g'2
ya-leh
with the slur the lyrics syllable is pushed to the
next beat
This has nothing to do with grace notes; this is the default
behavior of lyrics. To
You'll probably notice this before 2.7.6 is released, but just in case,
current
cvs has a problem with a key-change occuring at the end of the line:
it leaves space for the key change before the final bar line, then
prints
the key change after the final bar line (but still on the staff).
Erik
Graham Percival wrote:
On 17-Aug-05, at 10:57 PM, Aaron Mehl wrote:
The first case is as follows:
g'2\grace a'8( g'2 ) | g'2
ya-leh
with the slur the lyrics syllable is pushed to the
next beat
This has nothing to do with grace notes; this is the default
beh
> indeed, but it's actually wrong, since grace notes
> are too short to sing
> a syllable on.
I was hoping that was the answer I would get.
I am notating folk songs where there is indeed such
behaviour, i.e. the singer sings a syllable on a grace
note. Since they aren't trained musicians, I can
Claus Wilke wrote:
[percent repeats without body]
as Mats pointed, it is of course possible to get this, just by putting
the last measure of the previous material in the \repeat. Of course,
then you can't do
\fragment
\repeat "percent" 4 { \skip 1 }
\otherFragment
\repeat "perce
Hi again
hmn...
> >
> > g'2\grace a'8( g'2 ) | g'2
> > ya-leh
> >
What exactly is the slur here telling lilypond?
slur+lyric=?
It is obvious now that indeed the grace note is not
the issue, but the slur certainly is. The proof is
once I remove the slur all is well
Will Oram wrote:
Ooooh, how aggrevating! Between what I originally had and the reduced
score presented here, I must've run lily on two or three intermediate
steps to make sure the bug was still appearing. Yet, the version I
submitted works for me too. Sounds like a heisenbug.
OK, let me start
Aaron Mehl wrote:
indeed, but it's actually wrong, since grace notes
are too short to sing
a syllable on.
I was hoping that was the answer I would get.
I am notating folk songs where there is indeed such
behaviour, i.e. the singer sings a syllable on a grace
You can switch off the slur m
Hello
I have found, that under Debian testing there is
problem with package clled ec-fonts-mftraced.
I have version 1.0.10a-1 installed. This is the part
of official apt-repository.
There is a bug - output of Lilypond files ahve very
ugly fonts for Titles or markup-texts.
I tried to install other
On 18-Aug-05, at 3:00 AM, Han-Wen Nienhuys wrote:
Aaron Mehl wrote:
indeed, but it's actually wrong, since grace notes
are too short to sing a syllable on.
I was hoping that was the answer I would get.
I am notating folk songs where there is indeed such
behaviour, i.e. the singer sings a s
On 18-Aug-05, at 3:35 AM, Allar Õunapuu wrote:
How long it will take to fix this problem under
official Debian testing?
You'll have to ask Debian (or more precisely, the Debian
package maintainer) about that. Have you tried using
the Lilypond general linux installer from our website?
It shou
Bug reports on Debian packages should go to debian.
Have you tried the debian package of ec-fonts-mftraced
available an www.lilypond.org? Also, if you search the
mailing list archives, you will find a number of emails
from Debian users who have managed to solve the same
problem successfully.
/
Graham Percival wrote:
You can switch off the slur melismata. Check the manual for details.
OF course, that doesn't help if the rest of the piece does have slurs.
Well, you can just switch it on again, right? Isn't that what
\set ignoreMelismata = ##t
\unset ignoreMelismata
is for?
indeed
Yes indeed,
what would be nice would be another type of slur for
melismata. or maybe have a slur in the lyrics block,
that would make it an explicit slur for lyrics.
Aaron
> indeed, but it defeats the purpose of the automatic
> melismata, which is
> that you don't have to worry about this kind o
Am 2005-08-17 um 18:03 schrieb [EMAIL PROTECTED]:
actually the links helped me a lot. navigating around the .pdf was
quite a pain in the a**, so i overlooked quite a lot of the crucial
infos.
But did you manage to set any font? How?
I found the hint that fontconfig sees from OSX's fonts on
Well,
I looked at the comparison and my first reaction is
that this is not a fair deal.
They compare gui notation packages with lily?
What about a mup/abcm2ps/guido/musictex/philipswriter
etc comparison to lilypond.
Then we are comparing apples to apples.
BTW some of the outputs in the pdf com
lomir.mid
Description: Binary data
Hi there!
Is it a known bug that 2.7.5 creates broken MIDIs, at least on OSX?
(I used 2.6.3 before, there it works.)
I attached a sample.
Greetlings from Lake Constance
---
fiëé visuëlle
Henning Hraban Ramm
http://www.fiee.net
http://angerweit.tikon.ch/lieder
On Thursday 18 August 2005 11.36, Aaron Mehl wrote:
> I forgot to mention the version I am using if it
> matters:GNU LilyPond 2.7.3
>
> Also I didn't post the source since the lyrics are in
> hebrew, if it is relevent I can output a png.
It's enough for us to see _an_ example that demonstrates it,
Hi,
suddenly, the \break doesn't work with lilypond-book (version 2.6.3):
Any idea?
Wolfgang
#
\begin[staffsize=26]{lilypond}
emptymusic = {
\repeat unfold 2 % Change this for more lines.
{ s1 \break }
\bar "|."
}
\new Score \with {
\ove
> "AM" == Aaron Mehl <[EMAIL PROTECTED]> writes:
AM> They compare gui notation packages with lily?
AM> What about a mup/abcm2ps/guido/musictex/philipswriter
AM> etc comparison to lilypond.
I'd be interested in that, too. But so far not interested enough to
actually type in the ab
> Note that the current default behaviour in LilyPond
> corresponds to
> the typesetting practice used in most printed music.
Yeah I know
I will play with phrsing slurs, which I didn't see in
the doc for the latest development version, I hope
they still exist.
Aaron
>/Mats
>
Aaron Mehl wrote:
Yes indeed,
what would be nice would be another type of slur for
melismata. or maybe have a slur in the lyrics block,
that would make it an explicit slur for lyrics.
One option is to use phrasing slurs, \(...\), for slurs that
shouldn't indicate a melisma and ordinary slurs,
I was thinking, why don't we just send the challenge
to the maintainers of each of those packages.
Is there a way to do it as a group. I mean not Laura
Conrad, Hans, Aaron etc but the lilypond users or
maybe send it back to the original person who did the
first 6?
Aaron
--- Laura Conrad <[EMAIL
Hi,
I've been searching the docs, but can't figure out why this won't work...
Here's a faily minimal sample of what I'm trying to do.
\version "2.6.3"
chordsOne = { \chords {
c2 c/e f g4:sus4 g
c1 es:dim
I couldn't figure this out..
Ver.2.7.4
The manual gives: -\_.. it doesn't work..
Best Regards,
Mehmet Okonsar, pianist-composer
www.okonsar.com
___
lilypond-user mailing list
lilypond-user@gnu.org
http://lists.gnu.org/mailman/listinfo/lilypond-user
Aaron Morse wrote:
> On 8/17/05, John Mandereau <[EMAIL PROTECTED]> wrote:
> > Please always tell which platform and which LilyPond version you
> use!
> Sorry, I completely forgot. I believe I have LilyPond 2.6.3 for
> Windows on a system running Windows XP Home (Dell Dimension 2400, 256
> MB RAM
Christ van Willegen wrote:
Hi,
I've been searching the docs, but can't figure out why this won't work...
Here's a faily minimal sample of what I'm trying to do.
I would actually recommend you to explicitly write out the \score{...}.
Also, you are exploiting some more features of LilyPond t
It seems that a few LaTeX command has survived in the manual by
mistake. The proper syntax is
c-_
/Mats
Mehmet Okonsar wrote:
I couldn't figure this out..
Ver.2.7.4
The manual gives: -\_.. it doesn't work..
Best Regards,
Mehmet Okonsar, pianist-composer
www.okonsar.com
___
I cannot repeat your problem here, but that's probably since
you didn't include the header of your LaTeX file. My guess is
that you have been hit by the problem discussed in
http://lists.gnu.org/archive/html/bug-lilypond/2005-08/msg00017.html
and some other emails to be found in the list archives.
On 18-Aug-05, at 6:25 AM, Aaron Mehl wrote:
will play with phrsing slurs, which I didn't see in
the doc for the latest development version, I hope
they still exist.
Umm... 6.4.3? It's the section right after slurs.
- Graham
___
lilypond-user mai
Thank you very much, it works!
Wolfgang
On Thu, 2005-08-18 at 16:50 +0200, Mats Bengtsson wrote:
> I cannot repeat your problem here, but that's probably since
> you didn't include the header of your LaTeX file. My guess is
> that you have been hit by the problem discussed in
> http://lists.gnu.or
Do folks ever use a mix of \relative and absolute when entering music?
If you have:
\relative c {
block of music
}
{
2nd block of music
}
Is 2nd block still in relative mode?
How would you cancel relative mode?
Thanks
Steve
Dr. Stephan L. Moss
Sr. Sy
Yeah I just looked at slurs and didn't see a link at
the bottom of the page to phrasing slurs
but now I see it.
thanks
:{)>
Aaron
--- Graham Percival <[EMAIL PROTECTED]> wrote:
>
> On 18-Aug-05, at 6:25 AM, Aaron Mehl wrote:
> > will play with phrsing slurs, which I didn't see
> in
> > the
On 18-Aug-05, at 10:59 AM, Stephan Moss wrote:
\relative c {
block of music
}
{
2nd block of music
}
Is 2nd block still in relative mode?
No. The relative mode ends with the }.
Cheers,
- Graham
___
lilyp
>
> Is it a known bug that 2.7.5 creates broken MIDIs, at least on OSX?
> (I used 2.6.3 before, there it works.)
> I attached a sample.
>
I can confirm this. None of the MIDI files lilypond are usealbe from
2.7.x They will not play in any aplication I have. Just to try
something else, I imported
37 matches
Mail list logo
