yes!,
host A x86_64
host B x86_64
vm x86_64
i try now this: on 'host B' where vm runs, compile "generic_x86_64"
kernel reboot and recompile complete system with no CPU_FLAGS
and will see if 'vm' runs on 'host A'
marko
Am 2017-08-25 14:26, schrieb Marcos:
Well, linux is easier then wind
Hi Macros,
Am 2017-08-25 11:54, schrieb Marcos:
Hi everyone,
Windows are very sensitive with hardware, mainly with CPU.
If you change, you break.
It is not the virtualization system fault.
For libvirt/kvm you can use the CPU kvm64 that hidde some specifics
features from the operational syst
kvm configuration.
https://github.com/dpsenner/libvirt-administration-tools#windows-guest-crashes-with-a-blue-screen-after-migrating-the-virtual-machine-to-another-host.
Good luck!
that doesn´t solved it :-(
marko
2017-08-24 17:57 GMT+02:00 Marko Weber :
hello,
a vm in format qcow2 on host
hello;
Am 2017-08-22 20:01, schrieb Sinan Polat:
I have multiple VM's on the same KVM host. One of the VM's is running
NTP. All VM's can reach eachother, no firewall in between. But the
problem is, the VM's cannot communicate over port 123/udp to the NTP
VM.
Network: 172.24.100.0/22
KVM: 172.
hello,
a vm in format qcow2 on host A (Intel Xeon CPU E5-1650 v4)
do not start on host B ( Intel Core i7-2600 CPU @ 3.40GHz )
i get on host B by starting the vm "trap errors" Opcode.
anyone here has an idea how to solve this?
kind regards
marko
--
zbfmail - Mittendrin statt nur Datei!
Op
Hi pavel,
Am 2017-07-19 14:01, schrieb Pavel Hrdina:
On Wed, Jul 19, 2017 at 11:45:36AM +0200, Marko Weber | 8000 wrote:
hello,
i rsynced a kvm vm from one host to another.
i start virt-manager and tell virt-manager to use an existing disk.
i set cpu to haswell that is on the host
Am 2017-07-19 14:01, schrieb Pavel Hrdina:
On Wed, Jul 19, 2017 at 11:45:36AM +0200, Marko Weber | 8000 wrote:
hello,
i rsynced a kvm vm from one host to another.
i start virt-manager and tell virt-manager to use an existing disk.
i set cpu to haswell that is on the host.
configure before
Hi,
Am 2017-07-04 03:08, schrieb Lei Zhang:
Hi, any comment or suggestion
On Thu, Jun 29, 2017 at 10:55 AM, Lei Zhang
wrote:
Hello everyone
I want to know how can I use libvirt to detect what cpu features a
virtual machine will see.
I guess I could do it in following way:
1. if cpu mode i
hello,
i rsynced a kvm vm from one host to another.
i start virt-manager and tell virt-manager to use an existing disk.
i set cpu to haswell that is on the host.
configure before start is set, and i start "begin installation".
I get this output by virt-manager:
Unable to complete install: 'inte
hello ,
i did a kvm guest with virt-manager and installed windows server 2016.
performance settings for the disk: hypervisor default for cache & io
mode
i added a 2nd disk to the guest , also with hypervisor default settings
on cache & io mode
Under disk settings in windows server 2016 i set
hello list,
i did a kvm guest with virt-manager and installed windows server 2016.
performance settings for the disk: hypervisor default for cache & io
mode
i added a 2nd disk to the guest , also with hypervisor default settings
on cache & io mode
Under disk settings in windows server 2016 i
Am 2017-03-08 11:11, schrieb Martin Kletzander:
On Tue, Mar 07, 2017 at 05:53:45PM +0100, Marko Weber | 8000 wrote:
Am 2017-03-07 13:01, schrieb Michal Privoznik:
On 03/07/2017 11:44 AM, Marko Weber | 8000 wrote:
(sorry, dont know how i put my posting into an reply to an other
issue
Hello,
i´ve done 2 vm with qcow2 disks and created them with qemu-img with
prealloc=metadata.
Virt-Manager shows me under the performance settings for the Storage,
Cache= Hypervisor Default IO= Hypervisor Default
Is this the best setting? Or do i choose "native" IO on
prealloc=metadata crea
Am 2017-03-07 13:01, schrieb Michal Privoznik:
On 03/07/2017 11:44 AM, Marko Weber | 8000 wrote:
(sorry, dont know how i put my posting into an reply to an other issue
before,
new posting to sepearte it, big sorry)
Hello list,
i updated on a gentoo system from libvirtd 2.5 to 3.1.0
Am 2017-03-07 13:01, schrieb Michal Privoznik:
On 03/07/2017 11:44 AM, Marko Weber | 8000 wrote:
(sorry, dont know how i put my posting into an reply to an other issue
before,
new posting to sepearte it, big sorry)
Hello list,
i updated on a gentoo system from libvirtd 2.5 to 3.1.0
s reachable via ping from
vm guest.
but it cant resolve hostnames and cant ping ip´s outside the
virtualisation host.
anyone knows this effect after update?
do i have to change some more things?
or is this a bug?
any help and hints are welcome
thank you
marko weber
on install i get this
from
vm guest.
but it cant resolve hostnames and cant ping ip´s outside the
virtualisation host.
anyone knows this effect after update?
do i have to change some more things?
or is this a bug?
any help and hints are welcome
thank you
marko weber
___
Hi List,
i installed qemu-agent on a windows server and it is working as
expected.
I can send via virsh commands. I already performed successful an online
backup of an windows server.
Now my question is, is it possible to execute commands on the windows
server via qemu-agent?
I want to sh
also,
Am 2015-09-17 13:57, schrieb Marko Weber | 8000:
hello,
in my windows vm i installed qemu-guest-agent and rebootet the vm.
In the settings for the vm i set via virt-manager a new channel "unix
socket" "org.qemu.guest_agent.0" "virtio".
when i try to
Am 2015-09-17 13:57, schrieb Marko Weber | 8000:
hello,
in my windows vm i installed qemu-guest-agent and rebootet the vm.
In the settings for the vm i set via virt-manager a new channel "unix
socket" "org.qemu.guest_agent.0" "virtio".
when i try to do a snapsh
hello,
in my windows vm i installed qemu-guest-agent and rebootet the vm.
In the settings for the vm i set via virt-manager a new channel "unix
socket" "org.qemu.guest_agent.0" "virtio".
when i try to do a snapshot via shell i get:
virsh snapshot-create-as --domain win7new win7new-snap1
hello list,
i have a running vm with win7.
When i fire up an 'virsh shutdown win7' nothing happens.
When i fire up a second the same command, then the win7 machine is
shutting down.
Why do i need to fire up this command twice?
Any ideas?
best regards
marko
--
hello list,
i have a running vm with win7.
When i fire up an 'virsh shutdown win7' nothing happens.
When i fire up a second the same command, then the win7 machine is
shutting down.
Why do i need to fire up this command twice?
Any ideas?
best regards
marko
--
__
hello mailinglist,
on gentoo system with qemu-1.6.1, libvirt 1.1.4, libvirt-glib-0.1.7,
virt-manager 0.10.0-r1
when i set on virtual machine "cache=none" in the disk-menu, the machine
faults to start with:
<<
Fehler beim Starten der Domain: Interner Fehler: Prozess während der
Verbindungs
hello cole,
Am 2013-06-27 18:54, schrieb Cole Robinson:
On 06/27/2013 11:59 AM, Marko Weber | ZBF wrote:
hello i installed virt-manager 0.10.0 on gentoo.
on start i get:
Fehler beim Starten des Virtual Machine Managers: cannot import name
SpiceClientGtk
Traceback (most recent call last
hello i installed virt-manager 0.10.0 on gentoo.
on start i get:
Fehler beim Starten des Virtual Machine Managers: cannot import name
SpiceClientGtk
Traceback (most recent call last):
File "/usr/share/virt-manager/virt-manager", line 303, in
main()
File "/usr/share/virt-manager/virt
Hi Peter,
the shutdowns of my windows7 prof, still taking ages.. up to 20-35
minutes !!!
i did what you suggested. i started the machine and watched what
happens via the "resource manager" (the one in the taskmanager).
i could see that day that windows was leeching updates. after a time
Hello Peter,
i will give that a try.
But why arent the updates written after first shutdown?
on a normal pc the updates are down after one reboot.
i will do some start - shutdowns like u suggested and message you.
marko
Am 2013-02-04 10:38, schrieb Peter Krempa:
On 02/02/13 18:34, we...@zac
hi,
i use libvirt 1.0.2 (-r1 , gentoo linux).
when i create a vm with win7 guest, virtio nic, virtio hdd, all is
running fine.
but when i shutdown the windows guest, it takes somestimes 20-34
minutes !!!
iotop shows me in the whole time writing with 2,xxmb/sec.
is the complete machine "rewrit
# virt-manager
/usr/share/virt-manager/virt-manager.py:306: DeprecationWarning:
Importing dbus.glib to use the GLib main loop with dbus-python is
deprecated.
Instead, use this sequence:
from dbus.mainloop.glib import DBusGMainLoop
DBusGMainLoop(set_as_default=True)
import dbus.glib
/29/2012 03:20 PM, Marko Weber wrote:
Hi all,
we have an easy question for you maybe.
when we start the virt-manager, and doubleclick an listed virtual
machine,
we always bei transported to CONSOLE page.
Thats very annoying for us.
Is there a possibility to set an option, that on doubleclick you
Hi all,
we have an easy question for you maybe.
when we start the virt-manager, and doubleclick an listed virtual
machine,
we always bei transported to CONSOLE page.
Thats very annoying for us.
Is there a possibility to set an option, that on doubleclick you are
getting the CONSOLE TAB.
in 9
ing
up a vm using vde. I don't know what to tell --network to use vde. If
someone has a hint (like an example cmdline for virt-install using
vde) and would share it with me would be great.
Kind regards,
Felix Blanke
On 2/7/12 1:20 PM, Marko Weber wrote:
Hello,
sounds you are using gen
Hello,
sounds you are using gentoo-linux, right?
Here on 1.0-r2 No Problems.
You need to unmask some other depends to run 1.0-r2
marko
Am 07.02.2012 12:23, schrieb Felix Blanke:
On 2/7/12 11:06 AM, Michal Privoznik wrote:
On 06.02.2012 19:58, Felix Blanke wrote:
Hello,
I have a problem wi
lisieren: could not open display
maybe its the X11DisplayOffset 10 in the sshd.config ?
marko
Am 18.01.2012 10:15, schrieb Christian Parpart:
On Wed, Jan 18, 2012 at 6:01 AM, Marko Weber
wrote:
getting this when starting virt-manager
databunka src # virt-manager
Traceback (most r
getting this when starting virt-manager
databunka src # virt-manager
Traceback (most recent call last):
File "/usr/share/virt-manager/virt-manager.py", line 383, in
main()
File "/usr/share/virt-manager/virt-manager.py", line 285, in main
raise RuntimeError(_("Unable to initialize GT
then have a look at archipel.
but many linux mags write it need some more developement.
its all in all beta status and frickling.
but when archipel is finished it will be a nice one.
Am 17.01.2012 21:23, schrieb Christian Parpart:
oh, sorry, I could have checked for recent threads first :)
Howe
Hallo Christian,
have look on ovirt (redhat).
ovirt-node.x86_64 : The RHEV Hypervisor daemons/scripts
ovirt-node-tools.noarch : RHEV Hypervisor tools for building and
running an RHEV Hypervisor image
Dunno if you can compare it too vmware vcenter, but ovirt is what i
think you need to manag
Hi Michal,
Am 17.01.2012 09:19, schrieb Michal Privoznik:
On 16.01.2012 23:04, Marko Weber wrote:
Hi Michal,
i cant say the USEFLAGS, cause i removed at end the package,
heres a cut of logfile /var/log/libvirt/libvirt.log
2012-01-15 19:48:11.960+: 21586: error : virCommandWait:2192
elibc_glibc json libvirtd lxc macvtap nfs nls numa pcap policykit
python qemu sasl udev virt-network
marko
Am 16.01.2012 18:58, schrieb Michal Privoznik:
On 16.01.2012 16:26, Marko Weber wrote:
Hello to the list at first - i am first time here.
i setup on my gentoo box libvirt and virt
8102: error : virCommandWait:2192 :
Interner Fehler Child process (/bin/sh -c EBT=/sbin/ebtables
cmd='$EBT -t nat -L'
eval res=\$\("${cmd} 2>&1"\)
if [ $? -ne 0 ]; then echo "Failure to execute command '${cmd}' :
'${res}'."; exit 1;fi
Hello to the list at first - i am first time here.
i setup on my gentoo box libvirt and virt-manager.
when i fireup virt-manager all seems okay.
when i want to create a new virtual machine it seems all okay,
until the step when i want to add an iso image to the cdrom.
i notcied that i cant choos
42 matches
Mail list logo
