Thank you, Fernando.
>
> 发件人： Fernando de Oliveira
>收件人： LFS Support List
>发送日期： 2012年5月30日, 星期三, 下午 7:12
>主题: Re: [lfs-support] 回复： interface eth0 doesn't exist
>
>
>On 30-05-2012 05:01, Omar wrote:
>> Tha
On 30-05-2012 05:01, Omar wrote:
> Thanks, Bruce. Ethernet works well now.
>
>>
>> 发件人： Bruce Dubbs
>>收件人： Omar; LFS Support List
>
>>发送日期： 2012年5月30日, 星期三, 下午 12:50
>>主题: Re: [lfs-support] interface eth0 doesn't exis
Thanks, Bruce. Ethernet works well now.
>
> 发件人： Bruce Dubbs
>收件人： Omar ; LFS Support List
>
>发送日期： 2012年5月30日, 星期三, 下午 12:50
>主题: Re: [lfs-support] interface eth0 doesn't exist
>
>Omar wrote:
>> Hi, all:
>> The eth0
Omar wrote:
> Hi, all:
> The eth0 fails to start when I start up the LFS7.1 system. It prompts that
>> Bringing up the eth0 interface... interface eth0 doesn't exist [FAIL]
>> I think it maybe correlative to the failure of chapter 7.2.1. It
>> gave the following infor
Hi, all:
The eth0 fails to start when I start up the LFS7.1 system. It prompts that
>
>Bringing up the eth0 interface... interface eth0 doesn't exist [FAIL]
>I think it maybe correlative to the failure of chapter 7.2.1. It gave the
>following information and failed to gen
I chose Atheros L1C Gigabit Ethernet support (EXPERIMENTAL) and it worked!
voila !!
Thanks for your help.
--
Thanks and Regards,
Karthik Bhuvanagiri
--
http://linuxfromscratch.org/mailman/listinfo/lfs-support
FAQ: http://www.linuxfromscratch.org/lfs/faq.html
Unsubscribe: See the above informati
Karthik Bhuvanagiri wrote:
> 02:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast
> Ethernet (rev c1)
Here's your ethernet controller.
> *lsmod:*
> Module Size Used by
> atl1c 36237 0
>
> I came to know that atl1c is the driver being used in
On Sun, Sep 04, 2011 at 10:17:56PM +0530, Karthik Bhuvanagiri wrote:
> Hi,
>
> *Following are the output of lspci and lsmod from my host system (Ubuntu
> 11.04)*
>
[ snipping some of this ... ]
> *lspci:*
> 02:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast
> Ethernet (rev c1)
Hi,
*Following are the output of lspci and lsmod from my host system (Ubuntu
11.04)*
*lspci:*
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev
03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset
Integrated Graphics Controller (rev 03)
00:1b.0 Audi
On Sat, 3 Sep 2011 21:30:12 +0530
Karthik Bhuvanagiri wrote:
> Hi,
>
> I did as u said but not resolved my problem - problem still exists. ip link
> command shows up following thing aprt from loopback interface:
>
> 2: sit0: mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0
>
> I re
On 09/03/2011 11:00 AM, Karthik Bhuvanagiri wrote:
> Hi,
>
> I did as u said but not resolved my problem - problem still exists. ip
> link command shows up following thing aprt from loopback interface:
>
> 2: sit0: mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0
>
> I recompiled the ke
the
> appropriate driver, re-compile, install and reboot.
>
> ./Cosis
>
>
>
> On 08/21/2011 07:32 PM, Karthik Bhuvanagiri wrote:
>
> Hi,
>
> I successfully followed LFS-book-6.8 and i'm able to boot and log-in to
> LFS. But while booting up it says:
>
> &q
On 21/08/2011, Michael L. wrote:
>
> If so, you need to re-compile the kernel - go into:
>
> Device Drivers -> Network Device Support>
>
> Choose the section (10/100/1000) fitting you networkcard, and select the
> appropriate driver, re-compile, install and reboot.
>
> ./Cosis
>
If the OP (1.) st
10/100/1000) fitting you networkcard, and select the
appropriate driver, re-compile, install and reboot.
./Cosis
On 08/21/2011 07:32 PM, Karthik Bhuvanagiri wrote:
Hi,
I successfully followed LFS-book-6.8 and i'm able to boot and log-in
to LFS. But while booting up it says:
"interf
Hi,
I successfully followed LFS-book-6.8 and i'm able to boot and log-in to LFS.
But while booting up it says:
"interface eth0 doesn't exist [WARN]"
Bringing up eth0 fails
Ofcourse i'm not able to connect to internet as well. What am i missing in
my new LFS system
On Mon, Jun 2, 2008 at 11:20 PM, Sanjeet Kumar <[EMAIL PROTECTED]> wrote:
>
> recently...when i executed /sbin/ipw3945d-start the device node got created
> and i could find a directory eth0 for the device in
> /sys/class/net(ipw3945 is the driver)but why doesn't it startup at
> boot.
--- On Tue, 3/6/08, Matt Darcy <[EMAIL PROTECTED]> wrote:
> From: Matt Darcy <[EMAIL PROTECTED]>
> Subject: Re: interface eth0 doesn't exist
> To: "LFS Support List"
> Date: Tuesday, 3 June, 2008, 3:25 AM
> Sanjeet Kumar wrote:
> > hi all!
>
Sanjeet Kumar wrote:
> hi all!
>
> i am using a lenovo notebook with intel pro wireless 3945abg built in it. i'd
> used LFS6.2 book 2 build a system. I get this warninng after every boot.
>
> Interface eth0 doesn't exist [warn]
>
> i'm right now compi
hi all!
i am using a lenovo notebook with intel pro wireless 3945abg built in it. i'd
used LFS6.2 book 2 build a system. I get this warninng after every boot.
Interface eth0 doesn't exist [warn]
i'm right now compiling blfs6.2n i've installed proper driver for
19 matches
Mail list logo
