Commit 9c8d781 introduced a memory leak in interface_ip_add_target_route
in case interface_ip_find_addr_target returns true for a given address
by not freeing the previously allocated route.
While at it rework the logic so a host route is only allocated when it's
really required.
Signed-off-by: Ha
Dear Hauke,
Quick question from my side: I was wondering why Ramips will probably
stay with 4.9, even though the patches for 4.14 have been in master
for quite a while. Since flow_offload is part of master, and it
requires 4.14, I think 4.14 would be a very welcome addition for
Ramips. My 2 cents
On Wednesday, 14 June 2017 20:41:12 CEST Daniel Golle wrote:
> I noticed that the Linux built-in bridge now supports filtering by VLAN
> tags. This can be much more efficient than using ebtables for the same
> task, hence I wonder if there is any reason to keep this disabled or
> if there is intere
On 04/02/2018 11:28 AM, Gio wrote:
> On Wednesday, 14 June 2017 20:41:12 CEST Daniel Golle wrote:
>> I noticed that the Linux built-in bridge now supports filtering by VLAN
>> tags. This can be much more efficient than using ebtables for the same
>> task, hence I wonder if there is any reason to ke
On 04/02/2018 10:54 AM, Jaap Buurman wrote:
> Dear Hauke,
>
> Quick question from my side: I was wondering why Ramips will probably
> stay with 4.9, even though the patches for 4.14 have been in master
> for quite a while. Since flow_offload is part of master, and it
> requires 4.14, I think 4.14
The following patches are now included upstream:
* 0052-MIPS-lantiq-fix-usb-clocks.patch
* 0053-MIPS-lantiq-enable-AHB-Bus-for-USB.patch
* 0060-lantiq-ase-enable-MFD-SYSCON.patch
Closes: FS#1466
Signed-off-by: Hauke Mehrtens
---
include/kernel-version.mk | 4 +--
.../g
This allows to configure VLAN aware bridges in Linux, it is also
possible to offload these VLAN aware bridges with DSA to some hardware,
which is supported by most of the DSA drivers.
This adds support for the VLAN features mentioned in bridge man page:
http://man7.org/linux/man-pages/man8/bridge.
On 29/03/18 11:57, Jo-Philipp Wich wrote:
Hi,
fstools will use the full libblkid if it is installed on the system,
this should also enable support for all filesystems supported by the
full libblkid.
Adding more and more exotic stuff to libblkid-tiny will bloat the
default fstools install for
On 29/03/18 10:25, rosys...@rosinson.com wrote:
Fix potential memory leak in fstools
Signed-off-by: Rosy Song
Hi,
the description is wrong, this fixes a potential null pointer deref and
i dont really see how probing of a FS would work without a magic so we
probably wont ever hit this case
On 29/03/18 10:25, rosys...@rosinson.com wrote:
When firmware is new flashed and reboot with a storage device plug in its usb
interface. Though the filesystem is not ready (FS_STATE_UNKNOWN), the
/dev/sda1 still mount on /mnt/sda1 by block-mount, then the system switching
jffs...
root@OpenWrt
Update Linux kernel version from 4.9 to 4.14 for arc770.
config-4.14 was simply regenerated with "make kernel_menuconfig".
Signed-off-by: Evgeniy Didin
Cc: Alexey Brodkin
Cc: John Crispin
---
target/linux/arc770/Makefile | 2 +-
target/linux/arc770/{config-4.9 => config-
copying at91bootstrap and uboot binaries to sdcard image is done
based on device name instead of dts name and this avoids creating
multiple u-boot and at91bootstrap binaries.
Signed-off-by: Sandeep Sheriker Mallikarjun
---
target/linux/at91/image/sama5.mk | 16 +---
1 file changed,
creating sdcard image with ext4 rootfs only and ignoring creating
other filesystem in sdcard image.
Signed-off-by: Sandeep Sheriker Mallikarjun
---
target/linux/at91/image/Makefile | 2 +-
target/linux/at91/image/sama5.mk | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/t
updating to new version v3.8.10 and copying at91bootstrap.bin to bin folder.
Signed-off-by: Sandeep Sheriker Mallikarjun
---
package/boot/at91bootstrap/Makefile | 4 ++--
package/boot/at91bootstrap/at91bootstrap.mk | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/p
fixed DTC command not found error while compling uboot-at91. The fix
is to set DTC PATH in uboot-at91 MAKE command.
Signed-off-by: Sandeep Sheriker Mallikarjun
---
package/boot/uboot-at91/Makefile | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/package/boot/uboot-at91/Mak
fixed build error when external kernel is selected from menuconfig.
The patches present in target/linux/generic does not gets applied
to external kernel and build fails while compiling mac82011 &
regmap-core kernel modules. as a fix added check in Makefile for
CONFIG_EXTERNAL_KERNEL_TREE present or
fetching uboot src from linux4sam/u-boot-at91 github for all at91
target.
Signed-off-by: Sandeep Sheriker Mallikarjun
---
package/boot/uboot-at91/Makefile | 17 +++--
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/package/boot/uboot-at91/Makefile b/package/boot/uboot
sama5d2 & samad4 have neon feature and sama5d3 does not have neon
feature due to which sama5d3 boot fails with error message Kernel
panic - not syncing: Attempted to kill init! exitcode=0x0004.
removing neon & VFPv4 support to fix this
Signed-off-by: Sandeep Sheriker Mallikarjun
---
target/
Add target device as at91-sama5d2_ptc_ek in SAMA5D2 subtarget and
build images for SAMA5D2 PTC Ek board.
Signed-off-by: Sandeep Sheriker Mallikarjun
---
package/boot/at91bootstrap/Makefile| 16 +-
package/boot/uboot-at91/Makefile | 18 +-
target/linux/at91/ba
Add support for SAMA5D27 SOM1 with target device as at91-sama5d27_som1_ek
in SAMA5 subtarget and build images for SAMA5D27 SOM1 Ek board.
Signed-off-by: Sandeep Sheriker Mallikarjun
---
package/boot/at91bootstrap/Makefile| 19 +-
package/boot/uboot-at91/Makefile
when external kernel is selected from menuconfig, device wb50n is not
avaliable and build fails. As a fix adding checks for external kernel.
Signed-off-by: Sandeep Sheriker Mallikarjun
---
target/linux/at91/image/sama5.mk | 24 ++--
1 file changed, 14 insertions(+), 10 delet
reorganizing at91 subtargets based on sama5 soc features and this fix
below problems.
1. able to set neon flags to sama5d2 & sama5d4 subtargets.
2. fix the make clean which removes all the subtargets in bin folder.
3. able to configure kernel specific to subtarget.
4. able to set vfpu4 flag
refreshing kernel configurations for sama5 and legacy subtarget.
Signed-off-by: Sandeep Sheriker Mallikarjun
---
target/linux/at91/config-4.9 | 445 --
target/linux/at91/legacy/config-default | 239 ++
target/linux/at91/sama5d2/config-default | 329 ++--
target/l
Hello All,
I'm trying to fix an issue with a slow-loading firewall on an
OpenWRT-based platform.
Because of the structure of the firewall I am supporting, there are a
large number of rules in the firewall config, resulting in a 100kb+
file. While most of these are disabled by default, they are s
Op ma, 2 apr 2018 om 4:42 , schreef Hauke Mehrtens :
The following patches are now included upstream:
* 0052-MIPS-lantiq-fix-usb-clocks.patch
* 0053-MIPS-lantiq-enable-AHB-Bus-for-USB.patch
* 0060-lantiq-ase-enable-MFD-SYSCON.patch
Closes: FS#1466
Compile-tested on: ramips/mt7621, x86/64
Run-t
On 02/04/18 18:34, Sandeep Sheriker Mallikarjun wrote:
fetching uboot src from linux4sam/u-boot-at91 github for all at91
target.
Signed-off-by: Sandeep Sheriker Mallikarjun
Hi,
Whats the difference between these uboots ? I am guessing its pre-patched ?
John
---
package/boot/uboot-at
On 02/04/18 18:34, Sandeep Sheriker Mallikarjun wrote:
reorganizing at91 subtargets based on sama5 soc features and this fix
below problems.
1. able to set neon flags to sama5d2 & sama5d4 subtargets.
2. fix the make clean which removes all the subtargets in bin folder.
3. able to confi
27 matches
Mail list logo
