Hi Florian,
On Wed, Feb 22, 2017 at 03:54:23PM -0800, Florian Fainelli wrote:
>
>
> On 02/22/2017 08:21 AM, Daniel Golle wrote:
> > Add new dt-bindings precompiler include to replace numerical default
> > VLAN assignments with more meaningful descriptive values, such that
> > 0x3f -> VLAN_CONFIG_
On 22.02.2017 18:37, Dennis Schneck wrote:
Thanks, the image work on my TP-Link TL-WA854RE v1
ok.
if you want to use newer or self-compiled firmwares on that device you
can use/flash the 850v1-Image. (same hardware)
with sysupgrade you might once need option "-F" to force it, and after
that t
Hello,
2017-02-20 9:11 GMT+01:00 Mathias Kresin :
> 19.02.2017 14:31, Piotr Dymacz:
> > This is more like offtopic, but there is another one problem with
> > similar devices. Lets forget now about "Wi-Fi enabled or not enabled
> > by default" issue and assume we have a device which:
> > - does
On 2017-02-21 00:29, Alen Opacic wrote:
> On sxt lite 2 (older version with 128mb nand flash) using
> lede-17.01.0-rc2-r3131-42f3c1f-ar71xx-mikrotik-vmlinux-initramfs.elf image,
> than sysupgrade to
> lede-17.01.0-rc2-r3131-42f3c1f-ar71xx-mikrotik-nand-
> large-squashfs-sysupgrade.bin.
> After rebo
Hi,
Ik compiled lede for raspberri pi 2 and it compiled.
When i try to compile it for raspberri pi 3, it get the following
compile error:
What can i do to fix this ?
Perry
CHK include/generated/asm-offsets.h
UPD include/generated/asm-offsets.h
CALLscripts/checksyscalls.sh
On Thu, 2017-02-23 at 11:25 +0800, Yousong Zhou wrote:
> This also fixes FS#544 as the allocation causing possible address alignment
> issue should now disappear
>
> Size comparison on x86_64 system
>
> function old new delta
> alloc_m
Hi Christian,
do you plan to integrate the IPQ40XX support for Asus, ZyXEL and AVM
from https://github.com/chunkeey/LEDE-IPQ40XX/commits/staging in the
next days?
I can provide support for Compex WPJ428 afterwards.
Best,
Christian
Am 2017-02-17 19:22, schrieb John Crispin:
On 17/02/2017 17
On 2017-02-23 04:25, Yousong Zhou wrote:
> This also fixes FS#544 as the allocation causing possible address alignment
> issue should now disappear
>
> Size comparison on x86_64 system
>
> function old new delta
> alloc_module
Eric Schultz wrote:
> prpl member IntrinsicID has physically unclonable function technology
> which allows a key to be generated at bootup based upon the physical
> characteristics of the device. It's the same key generated everytime
> but it isn't actually stored in flash. Their
Hello,
That's weird because neither the buildbot nor my local setup are failing.
Could you try again with a clean checkout of LEDE?
Which distro are you using?
Regards,
Álvaro.
El 23/02/2017 a las 13:35, Perry Couprie escribió:
> Hi,
>
> Ik compiled lede for raspberri pi 2 and it compiled.
>
>
Thanks for that.
> On Feb 22, 2017, at 11:44 PM, Syrone Wong wrote:
>
> According to LEDE's source code:
>
> config KERNEL_CRASHLOG
> bool "Crash logging"
> depends on !(arm || powerpc || sparc || TARGET_uml || i386 || x86_64)
> default y
>
> https://github.com/lede-project/source/blob/mas
Sxt LIte2(sxt2ndr2) boot log:
[0.00] Linux version 4.4.49 (buildbot@builds) (gcc version
5.4.0 (LEDE GCC 5.4.0 r3511-04c4b6f) ) #0 Mon Feb 20 09:21:42 2017
[0.00] bootconsole [early0] enabled
[0.00] CPU0 revision is: 0001974c (MIPS 74Kc)
[0.00] SoC: Atheros AR9344 r
On 12 February 2017 at 14:48, Anthony Sepa via Lede-dev
wrote:
> The sender domain has a DMARC Reject/Quarantine policy which disallows
> sending mailing list messages using the original "From" header.
>
> To mitigate this problem, the original message has been wrapped
> automatically by the maili
On 17 February 2017 at 11:42, danrl wrote:
> We are trying to make passwords on LEDE a tiny bit more secure by refusing
> weak or short (read: less than 6 characters) passwords.
>
> Please see related discussion over here, where the inconsistencies were
> discovered:
> https://github.com/openwrt
On Thu, 2017-02-23 at 21:35 +0100, Rafał Miłecki wrote:
> On 12 February 2017 at 14:48, Anthony Sepa via Lede-dev
> wrote:
> >
> > The sender domain has a DMARC Reject/Quarantine policy which disallows
> > sending mailing list messages using the original "From" header.
> >
> > To mitigate this p
On 23 February 2017 at 21:48, David Woodhouse wrote:
> On Thu, 2017-02-23 at 21:35 +0100, Rafał Miłecki wrote:
>> On 12 February 2017 at 14:48, Anthony Sepa via Lede-dev
>> wrote:
>> >
>> > The sender domain has a DMARC Reject/Quarantine policy which disallows
>> > sending mailing list messages u
The current implementation of calloc_a() returns packed pointers for the extra
arguments. These packed, unaligned, pointers are OK for a lot of architectures,
but not all. This patch will aligned the pointers returned in a manner congruent
with malloc(). I do not believe the extra padding overhead
VXLAN shares many attributes with the tunnel devices, so it is implemented
as a new tunnel type. The 'remote' attribute can be used for an unicast
peer or a multicast group.
The IANA-assigned port 4789 is used by default, instead of the non-standard
port Linux defaults to.
Signed-off-by: Matthias
Updates the 17.01 kernel to .51.
Compile-tested on:
* ar71xx
* ramips/mt7621
* x86/64
Run-tested on:
* ar71xx
* ramips/mt7621
Signed-off-by: Stijn Segers
---
include/kernel-version.mk | 4 ++--
.../901-Revert-bcma-switch-GPIO-portions-to-use-GPIOLIB_
On 23 February 2017 at 22:35, Stijn Segers
wrote:
> Updates the 17.01 kernel to .51.
>
> Compile-tested on:
> * ar71xx
> * ramips/mt7621
> * x86/64
>
> Run-tested on:
> * ar71xx
> * ramips/mt7621
>
> Signed-off-by: Stijn Segers
Why not the common way? Update kernel in master & cherry-pick to
led
On Mon, Feb 20, 2017 at 06:52:15PM +, Alberto Bursi wrote:
> The wiki feature showing what packages are in LEDE (and some information
> about them) is now complete! Hooray! :)
>
> https://lede-project.org/packages/start
Great, thanks Alberto!
Here are a few questions and comments:
- what i
On 23 February 2017 at 23:01, Anthony Sepa wrote:
> Is there anything I can do to fix it? I can switch to my gmail account? I
> was using my yahoo out of habit. I was posting using git send-mail, is that
> causing the problem? Should I change to just using email?
Well, using GMail will for sure l
On Thu, Feb 23, 2017 at 09:48:10PM +0100, David Woodhouse wrote:
> On Thu, 2017-02-23 at 21:35 +0100, Rafał Miłecki wrote:
> > On 12 February 2017 at 14:48, Anthony Sepa via Lede-dev
> > wrote:
> > >
> > > The sender domain has a DMARC Reject/Quarantine policy which disallows
> > > sending mailin
On 24 February 2017 at 05:20, Ted Hess wrote:
> The current implementation of calloc_a() returns packed pointers for the extra
> arguments. These packed, unaligned, pointers are OK for a lot of
> architectures,
> but not all. This patch will aligned the pointers returned in a manner
> congruent
On 23 February 2017 at 21:58, Felix Fietkau wrote:
>> I actually thought about patching calloc_a to make sizeof_long-aligned
>> allocation as the comment in libubox/utils.h says the func should "allocate a
>> block of memory big enough to hold multiple aligned objects."
>>
>> But that's too corase
-Original Message-
From: Yousong Zhou
Sent: Thursday, February 23, 2017 7:15 PM
To: Ted Hess
Cc: lede-dev
Subject: Re: [LEDE-DEV] [PATCH] libubox: Fix calloc_a() to return mem aligned
pointers
On 24 February 2017 at 05:20, Ted Hess wrote:
The current implementation of calloc_a() re
On 24 February 2017 at 08:30, Ted Hess wrote:
>
>
> -Original Message- From: Yousong Zhou
> Sent: Thursday, February 23, 2017 7:15 PM
> To: Ted Hess
> Cc: lede-dev
> Subject: Re: [LEDE-DEV] [PATCH] libubox: Fix calloc_a() to return mem
> aligned pointers
>
>
> On 24 February 2017 at 05:20,
This is required for default wireless configuration of malta target to
work out of the box again. Fixes "77ece30e: hostapd: Add ability to
specify that that wireless driver supports 802.11ac"
Signed-off-by: Yousong Zhou
---
package/kernel/mac80211/Makefile | 2 +-
1 file changed, 1 insertion(+)
Signed-off-by: Yousong Zhou
---
package/network/services/ppp/files/lib/netifd/ppp6-up | 0
1 file changed, 0 insertions(+), 0 deletions(-)
mode change 100644 => 100755
package/network/services/ppp/files/lib/netifd/ppp6-up
diff --git a/package/network/services/ppp/files/lib/netifd/ppp6-up
b/pa
Fixes FS#544
3dc78a4 kmodloader: don't store aliases info in struct module
Signed-off-by: Yousong Zhou
---
package/system/ubox/Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/system/ubox/Makefile b/package/system/ubox/Makefile
index c3eb442..ff8dead 10
Bastian Bittorf wrote:
> * Michael Richardson [23.02.2017 07:57]:
>> Yes, use an asymmetric key, and distribute the public part only.
> thanks people, for all the input and your ideas. our approach is now
> this: we hook into the 'usign' sourcecode and "hide" a secret there: 2
Yousong -
As a side note to your side note - If you examine the actual mechanics of the allocation, the memory block is indeed size aligned to
(4*sizeof(size_t)), but the actual pointer returned is offset of (2*sizeof(size_t)) within the block. As in CHUNK_TO_MEM...
Peace,
/ted (sorry for the
I noticed that the MikroTik RB493G has been removed from the list of supported
devices. Why was that? What would it take to add it back? I have serial
access so I can pull logs. I don't want to risk installing 17.01 after reading
the thread: MikroTik RB411AH sysupgrade issues.
_
RB493G hasn't been removed AFAICS, but was never listed as supported.
If you know which firmware files are needed for installation, you can update
the dataentry accordingly [1].
Datafields to be updated:
Firmware LEDE Install URL
Firmware LEDE Upgrade URL
LEDE Supported Current Rel
If you know
Hi Rafal,
I talked this through with jow, a lot of targets have already dropped
4.4 support in trunk, which makes backporting 4.4 updates to 17.01
non-trivial.
He was OK with me sending in a patch just for 17.01.
Cheers
Stijn
Op do, 23 feb 2017 om 10:44 , schreef Rafał Miłecki
:
On 23 Fe
35 matches
Mail list logo
