The settings should stick in the firmware, but they have to be set each time the
firmware starts (the ath10k-ct driver should do that now, I think).
I haven't tested this feature though, so let me know if you find any issues.
Thanks,
Ben
On 04/24/2017 05:17 PM, Nick Dennis wrote:
Thanks. i did
Hi Hans
I guess I should have double checked FS#713. I thought it was set to
notify, and just wasn't touched. Sorry about that.
wrt:
> As explained in FS#713 reverting this patch will lead to complaints
> from people homenet is broken
> (https://github.com/openwrt/openwrt/issues/346[1]); a mo
Thanks. i did see something in mail-archive (don't know what source)
https://www.mail-archive.com/search?l=ath...@lists.infradead.org&q=subject:%22request%5C%3A+ACK+timing+setting+required%22&o=newest&f=1
Does the debugfs setting get overwritten by the ini settings during
resets and have to be
try `make kernel_menuconfig` and select the corresponding one.
Best Regards,
Syrone Wong
On Mon, Apr 24, 2017 at 11:18 PM, Josua Mayer wrote:
> Am Montag, 24. April 2017, 02:37:48 CEST schrieb Syrone Wong:
>> You may want to enable CONFIG_DEBUG_MVEBU_UART0_ALTERNATE
> Yes, this is the one. But
There are some un-documented hacks using the ct_special debugfs file.
Very unlikely they are hooked into LEDE.
See this code in wmi.h:
/* CT firmware only, and only builds after June 26, 2015 */
struct wmi_pdev_set_special_cmd {
#define SET_SPECIAL_ID_ACK_CTS 0 /* set ack-cts-timeout register *
Excuse me for my lack of experience with the patches. It turned out
the patch was just fine, but gmail probably messed up the formatting.
Thank you all very much for the links to the informative patches
guides. I created my own patch with quilt and applied all the changes
to the source manually. Th
I have AP <-> Client links on the ath10k-ct driver+ firmware on QCA 9882
radios that work fine at a couple of hundred Meters. I recently tried a
link at 1.2 Kilometers, but only got <1Mbps throughput. Does anyone know
if coverage class/ack timeout is implemented in the ath10k-ct
driver+firmware
On 04/24/2017 10:05 PM, Philip Prindeville wrote:
> Inline…
>
>> On Apr 23, 2017, at 6:06 PM, Matthias Schiffer
>> wrote:
>>
>> Use install_bin to copy upgraded with all dependencies. The old name
>> /tmp/upgraded is temporarily retained as a symlink to avoid breaking
>> things.
>>
>> Signed-off
Inline…
> On Apr 24, 2017, at 2:20 PM, Matthias Schiffer
> wrote:
>
> On 04/24/2017 10:05 PM, Philip Prindeville wrote:
>> Inline…
>>
>>> On Apr 23, 2017, at 6:06 PM, Matthias Schiffer
>>> wrote:
>>>
>>> Use install_bin to copy upgraded with all dependencies. The old name
>>> /tmp/upgraded
Inline…
> On Apr 23, 2017, at 6:06 PM, Matthias Schiffer
> wrote:
>
> We can reuse the kill_remaining and run_ramfs facilities of the stage2 run
> by upgraded.
>
> Signed-off-by: Matthias Schiffer
> ---
> package/system/fstools/Makefile | 2 +-
> package/system/fstools/files/snapshot |
Inline…
> On Apr 23, 2017, at 6:06 PM, Matthias Schiffer
> wrote:
>
> Use install_bin to copy upgraded with all dependencies. The old name
> /tmp/upgraded is temporarily retained as a symlink to avoid breaking
> things.
>
> Signed-off-by: Matthias Schiffer
> ---
> package/system/procd/files/n
On 04/24/2017 12:39 AM, Y.B. Lu wrote:
Hi John,
Thank you very much.
But I still feel it's strange the crash didn't happen if used brctl to
configure instead of /etc/config/network.
Much memory(about 700MB) was consumed in UDP throughput test only when used
/etc/config/network.
As I know, bo
Am Montag, 24. April 2017, 02:37:48 CEST schrieb Syrone Wong:
> You may want to enable CONFIG_DEBUG_MVEBU_UART0_ALTERNATE
Yes, this is the one. But it is not visible from the Lede menuconfig. The
problem I was trying to point out is that in the kernel-config this is what
should be selected when s
On 04/24/2017 12:19 PM, Jo-Philipp Wich wrote:
> Hi,
>
>> While we're at it, also remove the ask_bool that can't work anymore with
>> staged sysupgrade.
>
> We should find an alternative solution though; like some new flag
> "--proceed-even-if-partition-table-changed" to avoid accidentally
> kill
Hi,
> While we're at it, also remove the ask_bool that can't work anymore with
> staged sysupgrade.
We should find an alternative solution though; like some new flag
"--proceed-even-if-partition-table-changed" to avoid accidentally
killing user partitions.
~ Jo
_
On 24 April 2017 at 15:39, Y.B. Lu wrote:
> Hi John,
>
> Thank you very much.
>
> But I still feel it's strange the crash didn't happen if used brctl to
> configure instead of /etc/config/network.
> Much memory(about 700MB) was consumed in UDP throughput test only when used
> /etc/config/network
On 04/24/2017 09:43 AM, John Crispin wrote:
>
>
> On 20/04/17 15:37, Roman Spychała wrote:
>> From: Roman Spychała
>>
>> Signed-off-by: Roman Spychała
>> ---
>> net/asterisk-13.x/Makefile | 1 +
>> 1 file changed, 1 insertion(+)
>
> Hi Roman,
>
> asterisk is part of the packaged feed on gith
On 20/04/17 15:37, Roman Spychała wrote:
From: Roman Spychała
Signed-off-by: Roman Spychała
---
net/asterisk-13.x/Makefile | 1 +
1 file changed, 1 insertion(+)
Hi Roman,
asterisk is part of the packaged feed on github. please send the patch
as a PR there.
John
diff --git a/
Hi John,
Thank you very much.
But I still feel it's strange the crash didn't happen if used brctl to
configure instead of /etc/config/network.
Much memory(about 700MB) was consumed in UDP throughput test only when used
/etc/config/network.
As I know, both ls1043a with DPAA ethernet driver and
19 matches
Mail list logo
