Allen,
I had a look at the Aircraft Spruce page. Does not look like what I need.
I need to attach to a brake fluid reservoir, which has a male thread
1/8"NPT. On the other side, I will have a rubber hose, with an ID that
should be around 1/4". Therefore, I need a female 1/8"NPT on the one
sid
Serge:
Woops, cancel my earlier reply, I missed the "male NPT" part. I'll see what
I can find locally(automotive) or the AN840 can still be used, you will just
need AN910 couplings (unless the stackup is too long), or you want 45 or 90
degree fittings.
Allen G. Wiesner KR-2SS/TD S/N 1118
65
Serge:
I think I've found what you want, go to http://www.mcmaster.com/
click on: Pipe and Pipe Fittings
then:Brass Pipe Fittings and Pipe
then:Pipe to Hose Adapters
then:Barbed Fittings
then:1/4' Hose Inner Diameter
then:Female Pi
No idea what the standard sizes of barbs are, but I need to couple to a
hose with a 1/4" inside diameter. Does that answer?
Serge
bo...@hatconversions.com
Envoyé par : krnet-bounces+serge.vidal=sagem@mylist.net
20/01/2006 16:11
Veuillez répondre à KRnet
Remis le : 20/01/2006 16:14
4 matches
Mail list logo
