Subject: EGT Sensors
To install EGT sensors on a Corvair do the exhaust manifolds have to be
drilled ?
Thanks
Jim Litchfield
East Coast
On Thu, Feb 23, 2023 at 8:49 AM Flesner via KRnet
wrote:
>
> On 2/22/2023 9:31 PM, Mark Langford wrote:
>
> Fiberglass and carbon fiber are so light that any im
On 2/22/2023 9:31 PM, Mark Langford wrote:
Fiberglass and carbon fiber are so light that any imbalance due to
material overlap isn't even noticeable.
++
Also, any "out of balance" weight is so close to the ro
Do you have a size in mind? I may have an old one from a TriPacer laying
around but I doubt that will help you.
Craig
N886MJ
N6423B
> On 02/22/2023 4:27 PM CST n357cj via KRnet wrote:
>
>
> Hi Folks,
> Does anyone have a source suggestion for spinner bulkheads? Apparently they
> are not av
Mike Stirewalt wrote:
>>Mark did a video/article on making his own composite spinner so if
making one out of composites would work his material might be helpful.
I realize you're after a bulkhead, not a spinner. <<
I've made several fiberglass spinners and even a front bulkhead or two,
but
To: KRnet
Cc: n357cj
Date: Wednesday, 22 February 2023 5:28 PM EST
Subject: KRnet> spinners
Hi Folks,
Does anyone have a source suggestion for spinner bulkheads? Apparently they are
not available from ACS anymore. I guess I could try aluminum spinning on the
lath but I haven't do
On 2/22/2023 4:27 PM, n357cj via KRnet wrote:
Hi Folks,
Does anyone have a source suggestion for spinner bulkheads? Apparently
they are not available from ACS anymore. I guess I could try aluminum
spinning on the lath but I haven't done that since 7th grade (that was
sometime in the last centu
Warpdrive have a good range of bulkheads and spinners in fibreglass, carbon
and also aluminium.
From: KRnet on behalf of MS
Sent: 22 February 2023 23:46:20
To: n357cj via KRnet
Subject: Re: KRnet> spinners
You have a Sensinich as I recall so suggest
You have a Sensinich as I recall so suggesting contacting them? Steve used
to have them at Great Plains so they may be worth a call. If anyone can find
what they're after I'm sure it would be you after all these years of
involvement.
Sorry I've not got anything more useful.
Mark did a
Hi Folks,
Does anyone have a source suggestion for spinner bulkheads? Apparently they are
not available from ACS anymore. I guess I could try aluminum spinning on the
lath but I haven't done that since 7th grade (that was sometime in the last
century)
Thanks,
Joe Horton
N657JH (reserved)
9 matches
Mail list logo
