On 9/23/2022 4:09 AM, Phillip Matheson via KRnet wrote:
It’s a fairly simple job to make the aileron spar caps last, when finished
cutting and sanding to shape, then just sit them in their correct place, fit
and drill the piano hinge, then remove and fit lock nut to the back of the spar.
Phil.
It’s a fairly simple job to make the aileron spar caps last, when finished
cutting and sanding to shape, then just sit them in their correct place, fit
and drill the piano hinge, then remove and fit lock nut to the back of the
spar.
Phil.
Sent from my iPhone
> On 22 Sep 2022, at 21:17, colin
Yes, sounds like a good idea. Don't forget to drill all the hinge holes where
you think they will need to go and place all the captive nuts on the back of
both pieces of wood before you place them into the foam on the wings and glass
over them. Including where you are going to fit the aileron
KR builders,
Any tips on the ailerons? Seems like it would be easier to put the internal
blocking in first before closing up the wings, then cutting out the
ailerons afterwards.
Thanks,
Brett
80% completed N718KR
--
KRnet mailing list
KRnet@list.krnet.org
https://list.krnet.org/mailman/listinfo/kr
4 matches
Mail list logo
