Where did you get the 8/32 nylon bolts?
>One method you can use when floxing your anchor nuts is to hold
>them in place with nylon bolts or screws. They can be easily
>removed after the flox is cured. I'd suggest a bolt as it gives you
>better gripping power for removal than a screw slot in the
cc:
Sent by: Subject: KR>nylon bolts
krnet-bounces@myl
i
Go to your local hobby shop. I use nylon bolts to hold my RC wings on. They
have tons of sizes and head shapes i.e. flat, phillips, hex..
>>> lar...@socal.rr.com 01/14/04 02:57PM >>>
Where did you get the 8/32 nylon bolts?
>One method you can use when floxing your anchor nuts is to hold
>them in
WD-40 would contaminate the composite. Use a real
release agent or non-contaminating wax.
Any Hardware store that carries the Hillman Line of
fasteners has these nylon bolts.
--- dpurdu...@caldwellmfgco.com wrote:
>
> Would a shot of WD 40 as a release agent help
> removal?
larry severson
At 12:57 PM 1/14/04 -0800, you wrote:
>Where did you get the 8/32 nylon bolts?
>Larry Severson
++
any hardware store worth being called a hardware store
should have them.
Larry Flesner
>
>Would a shot of WD 40 as a release agent help removal?
>
+
It's easier to control the "application area" with a nylon bolt.
Larry Flesner
Carterville, Illinois
4, 2004 3:46:41 PM
To: KRnet
Subject: Re: KR>nylon bolts
WD-40 would contaminate the composite. Use a real
release agent or non-contaminating wax.
Any Hardware store that carries the Hillman Line of
fasteners has these nylon bolts.
--- dpurdu...@caldwellmfgco.com wrote:
>
> Would a shot of
Sears Hardware
On Wed, 14 Jan 2004 12:57:37 -0800 larry severson
writes:
> Where did you get the 8/32 nylon bolts?
>
> >One method you can use when floxing your anchor nuts is to hold
> >them in place with nylon bolts or screws. They can be easily
> >removed after the flox is cured. I'd sugges
I used wax to seal the filler cap on my wing tanks so the filler, primer, and
paint would not run in and permanently glue my caps on. I wound up smearing
the wax when I sanded the filler and had all of the filler and paint peel off
after I painted the wings for about two inches around the cap s
9 matches
Mail list logo
