Netters,
I appreciate the responses thus far about my belts. I made the decision not to
mount the belts to the rear spar due to the reverse angle created by the seats
and such, as well as the weakening of the spars with more bolts drilled and
mounted. Although the previous builder had mounted th
ap beween
the legs).
I'd ensure that the lap belts hold you down!
Regards and safe flying
Barry Kruyssen
Cairns, Australia
k...@bigpond.com
AUF Registered 19-3873
http://users.tpg.com.au/barryk/kr2.htm
- Original Message -
From: "Colin"
To:
Sent: Friday, November 21, 2
seatbelts are a must with sholder harness,,but no one so far has addressed
roll over protection? the kr ( and alot of planes) have little if any support
in
the event of flipping over upside down. the canopy&turtle deck willnot
support that kind of impact! i've installed a steel rollbar inside
Hello Steve and KRNET,
I know many (most) on the KRNET are building widened KR's and thus are
not using Rand KR-2S pre molded turtle decks and instructions , but they
do provide rollover structure. The arch at both the front edged of the
turtle deck and the rear edge of the canopy are reinforce
4 matches
Mail list logo
