Since all the questions about filling and painting have been popping up lately,
I thought I would post this link again. It has valuable information on
finishing a composite plane.
http://curedcomposites.com/finish.html
Mark Jones (N886MJ)
Stevens Point, WI
E-mail: flykr2s at charter.net
Web: w
Beautiful airplane?.. and extremely neat work? Congratulations jw
Joe. E. Wallace
jwallacep51 at gmail.com
Robert,
Congratulations on your beautiful work! Looks like an award winner!
John Bouyea
N5391M/ KR2
OR81/ Hillsboro, OR
-Original Message-
Hi everyone,I've been working every day trying to get everything ready for the
DAR, he has got me set up for the end of April. I received my registr
Hi everyone,I've been working every day trying to get everything ready for the
DAR, he has got me set up for the end of April. I received my registration two
week ago and?I painted N863RK on the tail.?863 is my?EAA chapter in Lebanon
,Tn?and the RK is Robert & Kathy.
http://s449.photobucket.co
Very sanitary from day one - enviable work!
George
On 3/19/2015 5:27 PM, Robert Pesak via KRnet wrote:
> Hi everyone,I've been working every day trying to get everything ready for
> the DAR, he has got me set up for the en
you guessed it, only I did get them finished today. I was almost through and
the same guy came over and wanted to know if I wanted to fly in his newly
refurbished STOL Cessna 180. WOW, it was off the ground in 300ft. A very
nice handling airplane. I sure hope all this riding in airplanes will help
Netters,
Few guys asked me to post again link to website about finishing composite
airplane.
So here it is:
http://curedcomposites.netfirms.com/finish.html
George
geo...@hsweb.net
This is mainly for you new guys who are reading as much as you can about
finishing a composite airplane. In case you haven't run across it yet, here's
a pretty good web page that covers most of the basics.
http://curedcomposites.netfirms.com/finish.html
Ed Janssen
mailto:ejans...@chipsnet.com
Thanks Ed. Still in the drooling stage, but learning.
Greatly appreciate you sharing this.
Larry Lipe, Carbondale,IL
__
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
FINISHING COMPOSITES COMMANDMENTS
_
THOU SHALT NOT USE POLYESTER BASED PRODUCTS.
THOU SHALT NOT SANDBLAST.
THOU SHALT NOT TOUCH THY FRESH PAINT JOB TILL A FORT NIGHT.
THOU SHALT NOT INHALE DUST AND SPRY PARTICLES.
THOU SHALT NOT USE A DUST MASK,
And why not polyester? Are you refering to automotive fibre glass resin?
- Original Message -
From: "Larry A Capps"
To: "'KR builders and pilots'"
Sent: Wednesday, October 22, 2003 9:07 PM
Subject: KR>finishing composites
&g
Yeah, But, Virg
On Sat, 17 May 2003 06:35:52 -0700 (Pacific Daylight Time) "Dan Heath"
writes:
> RE: Actually, the KR2 plan price is not listed.
>
>
>
> It is, but you have to go to the KR2S listing to find it
Well, I just got in from a long day at the Factory. Jerry came over this
morning and we got started on the aileron balance. Then I took the WannaBee
outside and started sanding off the Smooth Prime. You know, you put it on,
so you can sand it off. It was nice, cause didn't have to wear that awf
>babywolf said:
>Change from the plans causes time delays and I am concerned that the
>literature says that if a project is not completed in two years its
>chances of being completed are greatly diminished
This is probably true. My problem is that the KR2 that I am trying to
finish was started
Larry,
There are templates for cutting out the firewall. If you don't have the
templates, I suggest that you buy a new set of plans.
N64KR
Daniel R. Heath - Columbia, SC
da...@kr-builder.org
See you in Red Oak - 2003
See our KR at http://KR-Builder.org - Click on the pic
See our EAA Chapter
Larry wrote-
>My problem is that the KR2 that I am trying to finish was started in 1971.
>The plans say nothing about the firewall, let alone give shape or
>dimensions.
>Could someone tell me the materials to use - wood type, etc.?
You need a complete set of plans for your project! There is a f
fly-kr.com does not list the plans and I have not received any response
from the phone.
At 03:34 PM 5/16/2003 -0700, you wrote:
>Larry,
>
>
>
>There are templates for cutting out the firewall. If you don't have the
>templates, I suggest that you buy a new set of plans.
>
>
>
>N64KR
>
>
>
>Daniel
RE: Mike Ladigo's setup
Is this plane flying? It looks like a neat little engine.
N64KR
Daniel R. Heath - Columbia, SC
da...@kr-builder.org
See you in Red Oak - 2003
See our KR at http://KR-Builder.org - Click on the pic
See our EAA Chapter 242 at http://EAA242.org
Hi Larry,
I think you're only a few miles from Rand Robinson (Huntington Beach).
Check out their site (www.fly-kr.com) and you'll have a source to find just
about anything you need. On their price list "Firewall Plywood" is listed at
$65.00. Don't know if it comes with a template/is alre
Larry,
I'll dig out the plans, see if I have a template. Stuff is in storage, will
take a day or two. Ah, the joys of time tunneling!
Stephen Mines/KR2
Panorama City, CA (San Fernando Valley)
- Original Message -
From: "larry severson"
To: "KR builders and pilots"
Sent: Friday, May 16, 2003 5:10 PM
Subject: Re: KR>Finishing
> fly-kr.com does not list the plans and I have not received any response
> from the phone.
>
> At 03:34 PM 5/16/2003 -0700,
Actually, the KR2 plan price is not listed. Also, the original builder
added 2" width at the cockpit. So, I do not know that a cutout firewall
plywood would be the right fit. Having an actual profile, I can adjust as
appropriate.
At 09:39 PM 5/16/2003 -0500, you wrote:
>The plans are listed on
RE: Actually, the KR2 plan price is not listed.
>
It is, but you have to go to the KR2S listing to find it.
KR-2S Price List
KR-2 BuilderÂ’s Manual and Plans - $165.00
KR-2S Supplemental Plans - $75.00
I tried to talk
Dan wrote:
> I tried to talk to Jeanette at last year's gathering, about helping her
with
> the site, but she said that she already had plans under way to make things
> better. Nothing has changed. I was even willing to handle e-mails for
her,
> but she really didn't want to talk about it. I re
Stephen Mines
Please e-mail me off net. I would like to give you a call and see your KR
2.
Ralph Snyder
Burbank CA
ralphnd...@juno.com
25 matches
Mail list logo
