KR> elevator trim tab

2014-11-08 Thread Mark Langford
John Bouyea wrote: > >>During my entire flight today, I had to hold forward pressure on the > stick. ...That leaves the trim tab "neutral position" is set > incorrectly or it's just too darn small...Can anyone comment on facing > & curing the same problem in their KR?<< The first time I fle

KR>Elevator Trim Tab

2008-10-12 Thread Dan Heath
Mark, I really like that. If our mirror motor craps out on us or if the installation does not test out, that is what we are going to put in. I really like the idea of putting it in under a removable panel. Does it give input to the position indicator, via the wires that come out of the servo, or d

KR>Elevator Trim Tab

2008-10-12 Thread Mark Jones
- Original Message - From: "Dan Heath" . Does it give input to the position indicator, via the wires that come out of the servo, or does something else need to be attached? Dan, The servo is directly wired to the position indicator and the rocker switch. It is a complete self contained u

KR>Elevator Trim Tab

2008-10-12 Thread Mark Jones
have added a new section to my web page showing my elevator trim tab installation so far. What is shown has been done in the last two days. Here is the link: http://mywebpage.netscape.com/n886mj/TrimTab.html Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S CorvAI

KR>Elevator Trim Tab

2008-10-12 Thread Mark Jones
I have added a new section to my web page showing my elevator trim tab installation so far. What is shown has been done in the last two days. Here is the link: http://mywebpage.netscape.com/n886mj/TrimTab.html Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S Cor

KR>Elevator Trim Tab

2008-10-12 Thread Orma Robbins
"my elevator trim tab installation " Mark that looks really good. The servo looks a lot like the RC servo that I used for both my elevator and rudder trim. One of my servo's failed last year after 18 years of service. I could not find a copy or similar servo and was forced to modify a Ford servo

KR>Elevator Trim Tab

2008-10-12 Thread Mark Jones
- Original Message - From: "Orma Robbins" Please tell me more > about the servo that I saw on your web page. Orma, Here is the web site for the RAC servos. http://www.rayallencompany.com/ Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S CorvAIRCRAFT w