KR> using loctite

2008-10-12 Thread Chris Johnston
I need to fit some sintered bronze bushing into aluminium plate, the parts are a good interference fit but I thought some loctite would not go astray either. Any information I have found so far on the on the web suggests that you coat the parts with loctite and then press fit together, but I

KR> using loctite

2008-10-12 Thread Scott William
Loctite isn't designed to "bond" parts together beyond .007 of a gap between those parts. (I think the 660 will will go to .020) Loctite 640 bearing retainer is what i always used on taper shafts, and I find it strong enough to eliminate the reliance on the retainig keys on those shafts. It is used

KR> using loctite

2008-10-12 Thread Chris Johnston
nston North Richmond NSW Australia - Original Message - From: "Scott William" To: "KRnet" Sent: Wednesday, August 02, 2006 11:37 AM Subject: Re: KR> using loctite > Loctite isn't designed to "bond" parts together

KR> using loctite

2008-10-12 Thread Don Chisholm
From: "Scott William" To: "KRnet" Sent: Wednesday, August 02, 2006 11:37 AM Subject: Re: KR> using loctite > Loctite isn't designed to "bond" parts together beyond > .007 of a gap between those parts. (I think the 660 > will will go to .020) Loctite