bolt length.
Just sayin'
Mark W.
N952MW
-Original Message-
From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of n357cj via
KRnet
Sent: Friday, March 31, 2017 2:09 PM
To: KRnet
Cc: n357cj
Subject: Re: KR> torque wrench
OOH...It's Friday and this so begs for an ans
About 1980 at Air Venture, A fellow had a KR2 that had a few double
instruments in the panel. When I asked about it, he said that he was going
to fly it home to Switzerland and that they required a backup on some
instruments in case one went bad. To which I asked, If two instruments have
differ
OOH...It's Friday and this so begs for an answer.
I've heard that everyone has a guy. A guy to fix the car,... a guy to mow
the lawn, a guy to clean the gutters, plumbing, electric, and on and on..I
figure I'm the guy, no body touches or does anything for me that I can do
myself, At church I
I believe Harbor Freight has one or two versions of this as well, so
check there also, especially for one that has a lower range (I own one
of the lower range models). The beauty of these things is that you can
use this as the torque wrench itself. Just attach a breaker bar, set
where you want it
A quick question about the range on that adapter. The Home Depot website says
range is 29 - 147 ft-lbs. Is 29 ft-lbs really the low end?
Thanks, Bob BlakeSalisbury, MD
On Friday, March 31, 2017 12:24 AM, Jeff Scott via KRnet
wrote:
Subject: KR> torque wrench
I purchased one
Subject: KR> torque wrench
I purchased one of
these
http://www.homedepot.com/p/Powerbuilt-1-2-in-Drive-Digital-Torque-Adapter-940962/203117027#
to verify my torque wrench is in calibration when I start engine
assembly in the next few days.
That begs the question: Who calibrates the calibra
I purchased one of
these
http://www.homedepot.com/p/Powerbuilt-1-2-in-Drive-Digital-Torque-Adapter-940962/203117027#
to verify my torque wrench is in calibration when I start engine
assembly in the next few days.
That begs the question: Who calibrates the calibrator, who inspects
the ins
7 matches
Mail list logo
