KR> testing 1..3

2015-03-20 Thread Sid Wood
I am using an electronic power panel that has electronic breakers. When circuit trips, the electronic breaker resets when the power is switched off. The power switches are at the lower left of my panel; an easy reach right next to the throttle. The electronic breakers have no life-limiting num

KR> testing 1..3

2015-03-20 Thread rbaalman at cox.net
The only circuit breaker accessable to the pilot is the fuel pump. It is located just below the throttle adjacent to the fuel pump switches. This is the only item I have to have to stay aloft. There are three pumps (L, R, & a common for either). I will be using Pmags, so if I have partial ele

KR> testing 1..3

2015-03-19 Thread John Bouyea
Hi Roger. Looks interesting and tidy. Do you envision needing to replace fuses/ reset breakers in-flight? -Original Message- ...For access, the panel swings out, hinged on the right side adjacent to the glove box. Fuse/ relay panel is behind, and it also swings out to access contactor,

KR> testing 1..3

2015-03-19 Thread tommy waymack
First day in some time it was good to fly.Got Booger Red out flying.Plane was hard to start,thought I might run down the battery even though it stays on the battery maintainer.Cranked up and ran fine.Made a terrible landing in ideal conditions.Guess one really does need to practice.Then later did 3

KR> testing 1..3

2015-03-19 Thread rbaalman at cox.net
I am deep into airframe wiring. 90% complete 70% to go. I think I have wasted $20 in terminal ends. The panel is now a psuedo permanent part of the cabin. For access, the panel swings out, hinged on the right side adjacent to the glove box. Fuse/ relay panel is behind, and it also swings out

KR> testing 1..3

2015-03-18 Thread stefkr2 at kpnmail.nl
Hi, It is very quied on the net? or something is wrong, or everybody is very bussy with building or flying. Stef -- Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2

KR> testing 1..3

2015-03-18 Thread Paul Visk
t.org Date: 03/18/2015 5:27 PM (GMT-06:00) To: KRnet Subject: Re: KR> testing 1..3 > >It is very quied on the net? or something is wrong, or everybody is >very bussy with building or flying. >Stef >-++ I

KR> testing 1..3

2015-03-18 Thread Flesner
> >It is very quied on the net? or something is wrong, or everybody is >very bussy with building or flying. >Stef >-++ I've been busy doing the annual inspection on my KR and disassembling a second 0-200 to do a rebuild and