KR> ply scarfs

Hi gang After cutting my ply strips for the spar webs, I found that I had cut two strips too many for thr rear outer spars leaving me short of one skin for one of the forward outer spars. After sifting through all my offcuts I found that I could make up the web from three seperate offcuts. Would th

KR> ply scarfs

Dene wrote: >Would this be acceptable, my scarf joints are all 1:20 Dene, If the scarf joint is properly done, the joint will be stronger than the plywood itself so it shouldn't be a problem. Good luck. Dean Cooper Jacksonville, FL Email me at dean_coo...@bellsouth.net See my KR project at www

KR> ply scarfs

t.com -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Dene Collett (SA) Sent: Monday, September 27, 2004 11:33 AM To: krnet Subject: KR> ply scarfs Hi gang After cutting my ply strips for the spar webs, I found that I had cut two strips too