Hi,
I am in the middle of replacing my canopy. I have searched the archive,
and find no info on how to bond a bubble to the frame.
I have inherited what I think is an original kr2 canopy, and a GRP
frame. the GRP frame has a flange that will sit inside the bubble, ie
the screen will be bonded
Peter
Look at http://krbuilder.org/Canopy/index.html about 3/4 way down the
thumbnails, you may see some ideas that will help. If you are going to
drill holes, I suggest you get a proper drill bit for doing that. Also don
t plan on leaving screws in place unless it is quite loose in the hole or
mine.
Jack Cooper
kr2coo...@earthlink.net
Fayetteville. NC.
> [Original Message]
> From: Peter Diffey
> To: krnet
> Date: 7/9/2006 9:35:34 PM
> Subject: KR> bonding canopy to GRP
>
> Hi,
>
> I am in the middle of replacing my canopy. I have searched the archive,
I used West system Epoxy and others have used T88 epoxy.
Mark Langford have a good web page about fitting his and I did
a similar thing ( Thanks Again Mark)
Cutting, I got my 4 inch angle grinder with a very thin metal cutting
disc( used for stainless steal) works great , I can hold my canopy on ha
4 matches
Mail list logo
