rs and pilots"
Sent: Saturday, April 02, 2005 10:51 PM
Subject: KR> Yahoo! Photos - My KR2 S Project
Hi all,
I've added a few pics to my Yahoo album with the wings on.
Gavin
http://au.pg.photos.yahoo.c
. The picture of your left wing stub I see somthing just above the
> main spar that looks like it must be some kind of opening for cabin
cooling.
Yup it's a home grown NACA duct for cabin ventilation, I think i've made it
too big though, time will tell.
I just marked out the shape on the 3mm
http://au.pg.photos.yahoo.com/ph/glasseyegav/album?.dir=a154
Sorry all heres the link again.
Gav
Glasseyegav wrote:
>
>. The picture of your left wing stub I see somthing just above the
>
>
>>main spar that looks like it must be some kind of opening for cabin
>>
>>
>cooling.
>
>
>
Gav,
Are you using the 18% tapering to the 16% airfoil or the constant 16%?
Can't wait to hear how th
> Are you using the 18% tapering to the 16% airfoil or the constant 16%?
Your plane sure looks nice.
Thanks I like the look of it too,
I'm using 5048 at the root and the 5046 at the tip.
The wings as you see them there still have to get the 8" tip extensions
added to them.
Gav
Hi all,
I've added a few pics to my Yahoo album with the wings on.
Gavin
http://au.pg.photos.yahoo.com/ph/glasseyegav/album?.dir=a154
Nice work Gavin,
Soon you'll have to organize a "Down Under Gathering"
for the Ozzie and New Zealand KRs.
Frank
--- Glasseyegav wrote:
>
> Hi all,
>I've added a few pics to my Yahoo album with the
> wings on.
> Gavin
Frank Ross,
EAA Chapter 35,
San Geronimo, TX
RAF Lakenheath, Suffolk,
Very good show.
Jim
> I like your fuel guage. Where did you find that?
> Gene Leone, Worland, > at
The fuel gauge is from the local marine shop, they come from the stainless
steel cruise tanks, it's called a sailmaster. Spruce sells something
similar, I've used these ones because everything I get from spruce seems
It's been raining here so I thought I'd do a little on my panel!! It's just
buffed aluminium at the moment but it will be black when finished.
Missing is the egt/cht gauge and a fuel pressure gauge.
you'll see in the pics that I haven't fitted the throttle,mixture and heat
controls yet or any el
Gav's link should be:
http://au.pg.photos.yahoo.com/ph/glasseyegav/album?.dir=a154&;
src=ph&store=&prodid=&.done=http%3a//au.pg.photos.yahoo
com/ph/glasseyegav/my_photos
I kinka like tha brushed aluminum look. Looks like it is going to be a
really neat panel. Is that a radio in the center?
S
> Gav's link should be:
>
> http://au.pg.photos.yahoo.com/ph/glasseyegav/album?.dir=a154&;
> src=ph&store=&prodid=&.done=http%3a//au.pg.photos.yahoo
> I kinka like tha brushed aluminum look. Looks like it is going to be a
> really neat panel. Is that a radio in the center?
Yup sure is it's
Well I've settled on fuel gauges, they're are a little heavier than I would
have liked being all stainless construction, but for pure simplicity they are
tops!!
I'm intending to install them at the root of my outer wings and they'll be
flush with the surface, the idea is that I'll be able to se
Try this
Gav
http://au.pg.photos.yahoo.com/ph/glasseyegav/album?.dir=a154&.src=ph&store=&prodid=&.done=http%3a//au.pg.photos.yahoo.com/ph//my_photos
Gav,
You might have to go into your photo album and change
the settings to "Public". Unless you do that it won't
let others into your albums.
By cutting and pasting the entire address, I did get
your album at:
http://au.pg.photos.yahoo.com/ph/glasseyegav/album?.dir=/a154&.src=ph&.tok=ph_eMXCB8Mee
Third time lucky.
Now I've activated public sharing.
Gav
http://au.pg.photos.yahoo.com/ph/glasseyegav/album?.dir=/a154
I like your fuel guage. Where did you find that?
Gene Leone, Worland, Wyoming
---Original Message---
From: Glasseyegav
List-Post: krnet@list.krnet.org
Date: 01/22/05 07:02:14
To: KR builders and pilots
Subject: KR> Yahoo! Photos - My KR2 S Project
Third time lucky.
Now I've a
17 matches
Mail list logo
