11 1:16 PM
Subject: KR> T-88 Question
Here is a quick question. Does excess T-88 have to be removed from a wood
surface before another piece of wood can be bonded to that surface?
In my situation, excess glue has pooled on and around the outside of some of
my
fuselage truss joints. The plywoo
On 4/5/2011 10:16 PM, sean duggan wrote:
> Here is a quick question. Does excess T-88 have to be removed from a wood
> surface before another piece of wood can be bonded to that surface?
>
Here is a list of surface prep techniques for Epoxies. I suggest
everybody take a look at that as it is HIGHL
Here is a quick question. Does excess T-88 have to be removed from a wood
surface before another piece of wood can be bonded to that surface?
In my situation, excess glue has pooled on and around the outside of some of my
fuselage truss joints. The plywood and partial longerons that will be gl
t.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Darren Crompton
Sent: Sunday, May 13, 2007 7:22 AM
To: KRnet
Subject: KR> T-88 - Volume vs Weighing results
Using my very accurate electronic gold scales, I have come up with the
followong volume vs weight results.
First of all, you can not assume
For those who weigh their T-88. I would like to hear if someone has weighed
the mixture correctly then compared to see if it is actually 50% to 50% by
volume? I built my entire project with the volume method and the results wont
change anything I just would like to know. I don't have scales.
...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of skp...@charter.net
Sent: Thursday, May 10, 2007 8:00 AM
To: kr...@mylist.net
Subject: KR> T-88 weight vs volume
For those who weigh their T-88. I would like to hear if someone has weighed
the mixture correctly then compared to see if it
Wow did I ever get my feathers flamed for suggesting that brad may have been
mixing at the wrong ratio. Brad stated that he bought the t-88 from wicks
aircraft. Before I made that post I looked in wick cataloge and on line. I did
not find any T-88 epoxy. Of the epoxys listed in the Wicks catal
Using my very accurate electronic gold scales, I have come up with the
followong volume vs weight results.
First of all, you can not assume that all identical surgical syringes are
equal in weight. One weighed 6.53 grams and the other 6.70 grams.
10cc of resin weighed 11.95g and 10cc of hardener
I guess this post is more for the Aussies.
I am unable to find a supplier for T-88 Epoxy here in Australia. Is there a
suitable alternative or do I arrange to have it posted from the US? I'm not
sure if posting it would be OK as I'd be pretty sure it would be classified
as "dangerous goods"
Che
---
- Original Message -
From: "Darren Crompton"
To: "KRnet"
Sent: Tuesday, March 27, 2007 7:16 AM
Subject: KR> T-88 Epoxy
>I guess this post is more for the Aussies.
>
> I am unable to find a supplier for T-88 Epoxy here in Australia. Is ther
Check this out.
http://www.maddyhome.com/krsrch/message?sn=0&hit=10
Regards
Myron (Dan) Freeman
Indpls, Ind. 46203 USA. Home of the
2007 World Champion Indpls, Colt's
mfreem...@indy.rr.com
Posted - Tuesday, 03/27/07 9:46 am
I'm sorry, you have to type "T-88 glue" into the search engine.
http://www.maddyhome.com/krsrch/message?sn=0&hit=10
Regards
Myron (Dan) Freeman
Indpls, Ind. 46203 USA. Home of the
2007 World Champion Indpls, Colt's
mfreem...@indy.rr.com
Posted - Tuesday, 03/27/07 10:01 am
Sorry again. Check out message #11, KR>wood glue.
http://www.maddyhome.com/krsrch/search
Regards
Myron (Dan) Freeman
Indpls, Ind. 46203 USA. Home of the
2007 World Champion Indpls, Colt's
mfreem...@indy.rr.com
I guess I'm not fully awake and functional yet.
Regards
Myron (Dan) Freeman
Indpls, Ind. 46203 USA. Home of the
2007 World Champion Indpls, Colt's
mfreem...@indy.rr.com
Darren.Contact my friend in Australia, Chas
Knightsbridge for details on
epoxy...cknightsbri...@hotmail.combob pearce
--- Darren Crompton wrote:
> I guess this post is more for the Aussies.
>
> I am unable to find a supplier for T-88 Epoxy here
> in Australia. Is there a
> suitable alte
>
>I am unable to find a supplier for T-88 Epoxy here in Australia.
>Darren Crompton
++
Doesn't Wick's have an outlet in Europe and would it be easier to
buy and ship from there? Just wondering.
Larry Flesner
Darren, if marine timbers in seaford, Melbourne, no go, try "duck
flat wooden boats" in Adelaide S.A. .. steve edwards.. vic
I am unable to find a supplier for T-88 Epoxy here in Australia.
---
Darren
I got all my T88 here.
I'll get back to you asap.
with details
Phil Matheson
VH PKR
0358833588
Australia
Email: phillipmathe...@bigpond.com
Web Page
http://www.philskr2.50
- Original Message -
From: "Darren Crompton"
To: "KRnet"
Sent: Tuesday, March 27, 2007 10:16 PM
Subject: KR> T-88 Epoxy
>I guess this post is more for the Aussies.
>
> I am unable to find a supplier for T-88 Epoxy here in Australia. Is there
> a
>
Is there some way to thin T-88 without losing the bonding power. I've checked
the archives but nothing on thinning T-88
Patrick Driscoll
patric...@usfamily.net
Saint Paul, MN
Don't lrt them tell you the sky's the limit.
Man's footprints are on the moon
--- http://USFamily.Net/dialup.html - $8.
In a message dated 7/3/2005 6:45:39 PM Mountain Standard Time,
patric...@usfamily.net writes:
> Is there some way to thin T-88 without losing the bonding power. I've
> checked the archives but nothing on thinning T-88
Patrick, I used denatured alcohol to do that with
constructio
Is there some way to thin T-88 without losing the bonding power.
+++
After much research I have concluded that the short answer is NO.
There are however various considerations depending on the specific
application
I have emailed to you (direct) a copy of an article on this subject.
Thanks to Jim, Dan, Steve and others that gave me some advice. I guess I'll
just have to live with the sticky glops.
Patrick Driscoll
patric...@usfamily.net
Saint Paul, MN
Don't let them tell you the sky's the limit.
Man's footprints are on the moon
--- http://USFamily.Net/dialup.html - $8.25/
When squeezing out the hardner (the brown stuff) in the t88 2 part epoxy, my
hands get tired, especially when mixing larger batches. Last time I was doing
that task, I spied a spring clamp laying on the table. I deftly applied the
clamp to the bottle and bingo the hardner came out steady and wit
Try warming both bottles in warm water for 10 minutes. They flow much
better when warm.
Bernie McLean
Poplar Grove IL
Yes, indeed you are. Why didn't I think of that?
See you in Mt. Vernon - 2005 - KR Gathering
See N64KR at http://KR-Builder.org - Then click on the pics
There is a time for building and a time for FLYING and the time for building
has expired.
Daniel R. Heath - Columbia, SC
---Original Me
Or the microwave for ten seconds.
Brian Kraut
Engineering Alternatives, Inc.
www.engalt.com
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On
Behalf Of Bernard McLean Sr
Sent: Wednesday, May 11, 2005 7:17 PM
To: KRnet
Subject: Re: KR> T-88 TIP For
Try putting the T88 containers in a sauce pan with an inch or two of hot
water. It should flow out without effort.
- Original Message -
From: "Ron Smith"
To:
Sent: Wednesday, May 11, 2005 7:10 PM
Subject: KR> T-88 TIP For the lazy or the weak wristed
> When squeezing
I checked the archives for any info on T-88 going
bad and came up blank so
I think my T-88 epoxy portion might have gone
bad. Can it? It is thicker than it use to be
and, for lack of a better description, appears
somewhat crystallized. Would heating it help?
It's not real old (a year or so
In a message dated 10/4/2003 3:31:50 PM Eastern Daylight Time,
timwbr...@yahoo.com writes:
> Any thoughts
I have heard discussion both ways. The archives may have something and you
can also ask the Manufacturer, they probably have a contact number or web site.
Orma AKA AviationMech
KR2 N110LR
Tim Brown wrote:
> I think my T-88 epoxy portion might have gone
> bad. Can it? It is thicker than it use to be
> and, for lack of a better description, appears
> somewhat crystallized. Would heating it help?
Yep, crystallized it is. Just put it in the sink with some hot water for a
while, an
T-88 going bad?
Here is a link to some info on T-88. I used to have it on my site but I ran
out of room so I took it off.
http://www.systemthree.com/pdf/new/t88_tds.pdf";>http://www.systemthree.com/pdf/new/t88_tds.pdf
After my T-88 starts getting thick and not looking so good I save it and u
t;
Sent: Saturday, October 04, 2003 2:31 PM
Subject: KR>T-88 going bad?
> I checked the archives for any info on T-88 going
> bad and came up blank so
>
> I think my T-88 epoxy portion might have gone
> bad. Can it? It is thicker than it use to be
> and, for lack of a
If you think your T-88 is old, do a test on it before you use it. I had
some that seemed good, but was old. It would never cure, so I had to throw
it out.
N64KR
Daniel R. Heath - Columbia, SC
da...@kr-builder.org
See you in Mt. Vernon - 2004 - KR Gathering
See our KR at http://KR-Builder.or
34 matches
Mail list logo
