> snip from original message below
> Most of the T-88 is mixed 3 parts resin to 1 part hardener.
I left the original e-mail complete because I am not sure who made the
statement in it where T-88 is a 3 to 1 mixture. IT IS NOT !!! Someone does
not know what they are talking about. Jim, I think th
My understanding is the T-88 is a 50/50 mix and was verified by the tech
support at T-88. The people at SystemThree even pulled some samples that
matched my batch numbers and tested. They said they were fine.
I think the issue ended up to be me! I am expecting more from T-88 than it
will do. I
Good on you Brad.
It's better to be sure in your mind through testing than to remain unsure
and go flying.
My 13 year old son says he is not sure he'll go flying in my KR as it is
"held together with glue". I explained to him about the glue being
stronger than the timber and the value of good gu
Thanks for all the replies.
I realize the end grain joints are not strong and gussets are required, but
regardless of gussets and strength, I should be pulling out some wood fibers
with the break. Correct?
No Micro balloons being mixed here. Just Strait T88 in a 50/50 mix by
volume.
The guy on
4 matches
Mail list logo
