fixed landing gear
under it like a RV3. I would like to see some photos as you go along.
Kevin Golden
Harrisonville, MO.
-Original Message-
From: Tim Hoversten via KRnet
To: krnet
Cc: Tim Hoversten
Sent: Fri, Nov 3, 2017 2:23 pm
Subject: KR> New KR-1 Builder Checking In
We
On 11/3/2017 2:22 PM, Tim Hoversten via KRnet wrote:
Well folks, after many years of dreaming and planning, I am finally working on
my KR-1!
I picked up a project from Portage, WI, and hauled it back here to OSH, where
I live and work at EAA.
+
Hi Tim,
The fiberglass sheet in place of the plywood shoud be fine. I did some
test panels comparing .047 E-glass sheet with 3/32" plywood over a
typical truss structure and the glass was comparable in shear but peeled
more easily. If the glass was sanded dull where it was epoxied to the
trus
Well folks, after many years of dreaming and planning, I am finally working on
my KR-1!
I picked up a project from Portage, WI, and hauled it back here to OSH, where
I live and work at EAA. It is currently sitting in my garage on the retract
gear, with a HAPI conversion installed, and the foam
4 matches
Mail list logo
