KR> KR2SX progress report

2008-10-12 Thread Brian Kraut
al Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Ron Smith Sent: Tuesday, June 29, 2004 4:19 AM To: KRnet Subject: Re: KR> KR2SX progress report Brian Kraut wrote: Center section spars down, four more to go. Yippee. Brain Are you making bent spars?

KR> KR2SX progress report

2008-10-12 Thread Ron Smith
Brian Kraut wrote: Brian wote: Mine are not bent. I couldn't figure out how to get them in the boat after they were done. If the boat wasn't already built I would have left off the bottom ply until after the spar was in and got the spars in. So what are you going to do with then? Did you

KR> KR2SX progress report

2008-10-12 Thread Brian Kraut
Center section spars down, four more to go. Yippee. Brian Kraut Engineering Alternatives, Inc. www.engalt.com

KR> KR2SX progress report

2008-10-12 Thread Ron Smith
Brian Kraut wrote: Center section spars down, four more to go. Yippee. Brain Are you making bent spars? Did you take any pictures? Can you send them to me if you did? I am going to do that, and I think I have a game plan but would like to see what you did. __

KR> KR2SX

2008-10-12 Thread Brian Kraut
I have thought long and hard and spoke to several people and have finally decided what direction to head in with my new 2S project. I will go with the new airfoil. I will change the angle of the landing gear bracket to a few more degrees vertical than the Stock Diehl to give me more ground cleara

KR> KR2SX

2008-10-12 Thread tncompressor...@aol.com
Brian, My center spars are 10', with flaps, fuel tanks, between spars (14+ gallons each) be prepared to change aileron actuation arangement as the original belcranks are on rear of spar where you want your flaps. Riley Collins Rutledge, TN In a message dated 5/2/2004 9:39:38 AM Eastern Standard

KR> KR2SX

2008-10-12 Thread Brian Kraut
Is yours flying yet? If so, how effective are the flaps? I will probably use something like morse cables for the ailerons. -- Original Message -- From: tncompressor...@aol.com Reply-To: KRnet List-Post: krnet@list.krnet.org Date: Sun, 2 May 2004 22:32:59

KR> KR2SX

2008-10-12 Thread Phil Matheson
My center spars are 10', with flaps, fuel tanks, between spars (14+ gallons Riley Have your spars been beefed up, or standard size but lengthen to 10 ' Phil Matheson mathe...@dodo.com.au VH-PKR ( reserved) 61 3 58833588 See our VW Engines and Home built web page at http://www.