Larry, I'll check my catalog. Thanks for the advise.
Bill Page
boliverp...@bellsouth.net
- Original Message -
From: "Larry H."
To: "KRnet"
Sent: Wednesday, October 04, 2006 9:26 AM
Subject: KR> KR Parts / engine mount spacers
> Dan Diehl used to
I think Dan just called them aluminum spools before, he may custom make them I
do not know. You just place the 2" spool between the engine mount and the back
of engine case or Diehl case that the engine is bolted to. These spools were
for VW eningines I believe, but it may not matter if it is a
The second pic shows the 2" round aluminum spools used for spacers on my
engine.
http://krbuilder.org/EngineMeasurements/index.html
See N64KR at http://KRBuilder.org - Then click on the pics
See you at the 2007 - KR Gathering
There is a time for building and a time for FLYING and the time for F
Cloud"
Canberra, Australia
Larry&Sallie Flesner
Envoyé par : krnet-boun...@mylist.net
04/10/2006 15:25
Veuillez répondre à KRnet
Remis le : 04/10/2006 15:25
Pour : KRnet
cc :(ccc : Serge VIDAL/DNSA/SAGEM)
Objet : KR> KR Parts / engine mount
At 07:57
Yes we have a digital logo. I can E-mail
Lee
At 07:57 AM 10/4/2006, you wrote:
>I am going
>to have to extend my engine further forward about 2 inches
>Bill Page
If you can't find the proper engine mount you may be able to
add a 1 inch spacer at the firewall and a 1 inch spacer at the
engine.
Dan Diehl used to sell 2" round aluminum spacers.
Larry H
I am going
to have to extend my engine further forward about 2 inches
Bill Page
If you can't find the proper engine mount you may be able to
add a 1 inch spacer at the firewall and a 1 inch
Thanks, I did not think about that method.
Bill Page
boliverp...@bellsouth.net
- Original Message -
From: "Larry&Sallie Flesner"
To: "KRnet"
Sent: Wednesday, October 04, 2006 8:25 AM
Subject: KR> KR Parts / engine mount
> At 07:57 AM 10/4/2006, you wr
8 matches
Mail list logo
