In the 70's it was $16.00 for that same size. Figure in Inflation
and see
what it would be, Virg
On 8/26/2015 11:11 PM, Bill Masquelier via KRnet wrote:
> I just checked on the price of extruded polystyrene at Whitecap- it is $76
> per sheet (2" x 4' x 8'). Does that sound anyth
sounds about 4 times as expensive as I would have thought!
> Bill Masquelier
>
>> To: krnet at list.krnet.org
>> Date: Sat, 22 Aug 2015 20:29:04 -0700
>> Subject: Re: KR> Foam, peel ply and tank vents...
>> From: krnet at list.krnet.org
>> CC: billmasq at
g 2015 20:29:04 -0700
> Subject: Re: KR> Foam, peel ply and tank vents...
> From: krnet at list.krnet.org
> CC: billmasq at hotmail.com
>
> Colin
> I was avoiding extruded polystyrene since I couldn't find it here in Southern
> California but since you brought it up ag
ose to the template, then sanded to finish
using an 8' long sanding board.
Rob Schmitt
N1852Z
www.robert7721.com
-Original Message-
From: Bill Masquelier via KRnet
To: KR List
Cc: Bill Masquelier
Sent: Sat, Aug 22, 2015 10:29 pm
Subject: Re: KR> Foam, peel ply and tank
Colin; Spruce, if you please, not puce, goose. Dosvidanya, Peter
Several thoughts gents,
Bill, high there, I'll write soon, but continuing, unless you want to use wing
tanks, remember that Styrofoam is a much better product than Urethane foam
which I would NEVER ever use.
It crushes and has no rebound unlike polystyrene foams, so if you drop
something on you
rials/extruded-polystyrene-insulation
so if anyone else here in SoCal needs it it does exist!!
Thanks Colin and best on your trip over the Bearing Straits and beyond :)
BillM
> To: krnet at list.krnet.org
> Date: Sat, 22 Aug 2015 23:23:19 +0100
> Subject: KR> Foam, peel ply and tank vents
7 matches
Mail list logo
