Sent on the new Sprint Network from my Samsung Galaxy S?4.
Original message From: Dan Heath Date:07/30/2014 5:37 AM (GMT-05:00) To:
'Paul Visk' Subject: RE: KR> Elevator trim
hinge
Paul,
Are you looking for the HINGE that holds the tab to the elevato
PaulContact AeroTech hobby shop, 902 N. Main, North Canton, OH 44720.
330-499-1300.Pete Klapp, building N729PK,Canton, OH
> Date: Tue, 29 Jul 2014 18:25:57 -0500
> To: krnet at list.krnet.org
> Subject: KR> Elevator trim hinge
> From: krnet at list.krnet.org
>
>
go to the hardware store, like ACE or similar, and find the "hobby"
material like dowels, balsa wood, small lightweight brass and
aluminum tubing. Select an aluminum tube in the quarter inch range
and then get the tube that it slips inside of with no slop. I'd use
thin wall aluminum and no
ering in Mt. Vernon, Il - MVN
Daniel R. Heath - Lexington, SC
-Original Message-
From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Paul Visk via
KRnet
Sent: Tuesday, July 29, 2014 7:26 PM
To: KR EMAIL BOARD
Subject: KR> Elevator trim hinge
Does anyone have a s
-05:00) To:
'Paul Visk' ,'KRnet'
Subject: RE: KR> Elevator trim hinge
I get 1/4" nylaflow and others, from both AS and Wicks. You need to know
what the ID is and they come in various wall thicknesses.
Does anyone have a source for some ?1/4" tubing and the rod that goes into it
for the hinge on the elivator trim tab. I"ve looked in some hobby stores. But
all I can find is ?5/32" with a rod that would fit into it. The plans call for
? 1/4".?
Paul Visk
Belleville Il
618 406 4705
Sent on the
6 matches
Mail list logo
