You are making a parallelogram. Therefore the opposing sides must be of
equal length. Also the pivot point must be in the center of the fore and
aft sides. In my plans, the stick end was not the same length as the end at
the elevator. Be sure this is not the case with yours and if it is, adjust
And keep in mind that there should be an adjustable turnbuckle in each
of those two cables, set to a neutral position, for adjustment in stick
location and to get the cable tension right.
Mark Langford, Harvest, AL
ML "at" N56ML.com
www.N56ML.com
At 08:53 AM 6/22/2016, you wrote:
>Hi: I need some help on how to install the elevator control cables. I am
>building a stock KR2, using cables for the elevator just like the plans.
>I like to know if the two cables need to be the same lengths?
>Should the elevator be in the down position or up pos
Hi: I need some help on how to install the elevator control cables. I am
building a stock KR2, using cables for the elevator just like the plans.
I like to know if the two cables need to be the same lengths?
Should the elevator be in the down position or up position to install
the cables?
Everyo
4 matches
Mail list logo
