Well, yes and no actually. The same castings are used but the contour of
the leg is different. The axle position in relation to the gear leg is a
moved by about a couple inches depending on the leg used.
Steve Glover
www.nVaero.com
steve.glo...@nvaero.com
-Original Message-
Is the same
>
>Is the same Diehl Main Gear used for both the tail-dragger and nose-dragger
>(yes, tricycle) configurations (one mounted to the front of the spar and the
>other on the aft face)?
>I am asking as I have the Diehl Main Gear setup for a nose-dragger. I would
>kinda like to change it to a tail-dra
Howdy,
This seems to be a really dumb question since I cannot find reference to it
in the archives but I have to ask anyway.
Is the same Diehl Main Gear used for both the tail-dragger and nose-dragger
(yes, tricycle) configurations (one mounted to the front of the spar and the
other on the af
Netters, I need to find a pair of main gear fairings for the Diehl landing
gear. I have the wheel pants, just need to find out where to get the fairings.
Thanks, Jim Brewer N216CB KR2 95% complete 50% to go.
On Tue, 2 May 2006 20:29:10 -0400 "Jim Brewer"
writes:
> Netters, I need to find a pair of main gear fairings for the Diehl
> landing gear. I have the wheel pants, just need to find out where
> to get the fairings.
Jim
do a search for Diehl Aeronautical. I think that his phone number and
m
pre-laid
fibergalss with nut plates. Other builders may have a better and easier way,
but this works.
Bill Page
- Original Message -
From: "Jim Brewer"
To:
Sent: Tuesday, May 02, 2006 7:29 PM
Subject: KR> Diehl Main gear fairings
> Netters, I need to find a pair of ma
> Netters, I need to find a pair of main gear fairings for the Diehl
> > landing gear. I have the wheel pants, just need to find out where to get
> > the fairings. Thanks, Jim Brewer
For those running 5:00X5 main gear and have no
My spars are a little taller than stock KR2 Spars. Still has enough wood to
be OK for through bolts.but I was thinking that it might be good to put a
thin plate of 4130 on the back side (actually front side nose dtragger!) of
the spar from the casting to strengthen it up (size of casting).
June 21, 2005 8:39 AM
To: kr...@mylist.net
Subject: KR> Diehl Main Gear
My spars are a little taller than stock KR2 Spars. Still has enough wood to
be OK for through bolts.but I was thinking that it might be good to put a
thin plate of 4130 on the back side (actually front side nose
John wrote:"
> .but I was thinking that it might be good to put a thin plate of 4130
> on the back side..
John,
I would go with the route that Mark J spoke of, but if they're already
closed and you feel you need a backing plate, I would use 6061plate instead
of 4130 to avoid having to wor
10 matches
Mail list logo
