> Carbon Fiber speed brake
>
>I should add to this that given that you are putting holes in it,
>plywood core does make perfect sense, and I would laminate it all
>together and then cut the holes.? That's a lot easier than the other
>way, and it'
>
>I should add to this that given that you are putting holes in it,
>plywood core does make perfect sense, and I would laminate it all
>together and then cut the holes. That's a lot easier than the other
>way, and it'll work fine.
>Mark Langford
++
Just shoot me. I have to figure out how to make "plain text" the
default on this goofy web interface, if it's possible. See below...
I should add to this that given that you are putting holes in it,
plywood core does make perfect sense, and I would laminate it all
together and then cut the hole
Let me try that again...this time as "plain text" so it won't post a
blank.
Paul Visk wrote:
>>I made my with 3/32 birch. I followed Mark Langford's design...
Not quite...mine was made from 1/4" Lastofoam, rather than plywood.
I'll bet it's even stiffer than an eighth inch plywood base, as th
6 matches
Mail list logo
