KR> Brake Bleeding

2015-01-23 Thread Phillip Matheson
Subject: Re: KR> Brake Bleeding I do mine from the bottom up using a squirt can. Just put towels near the top vent. Connect and squ

KR> Brake Bleeding

2015-01-23 Thread danrh at windstream.net
The reservoir is very small. I installed mine on the inside of the firewall, but then, I did not have a header tank taking up that space. The RV guys install it on the engine side. I will be that it takes up less weight than the reservoir on each master cylinder where they are contained on ea

KR> Brake Bleeding

2015-01-23 Thread Sid Wood
Having done this brake bleeding only three times now on my KR-2, I am definitely a believer in installing a remote and accessible reservoir for the master cylinders. A plastic unit to visually check on preflight would be just the thing. Where to install the reservoir may require some creative

KR> Brake Bleeding

2015-01-23 Thread Dan Heath
Put an end to that problem forever. Install master cylinders with a separate reservoir. I like the clear ones so you can see when it is filling up. Then get one of these and fill them from the bleeder. It is a good candidate for a group buy, but not so expensive that it is not worth having in y

KR> Brake Bleeding

2015-01-23 Thread Paul
I do mine from the bottom up using a squirt can. Just put towels near the top vent. Connect and squirt. - Original Message - From: "Sid Wood via KRnet" To: krnet at list.krnet.org Sent: Monday, January 19, 2015 6:31:01 PM Subject: KR> Brake Bleeding "?Bleeding t

KR> Brake Bleeding

2015-01-19 Thread ppaulvsk
: Sid Wood via KRnet Date:01/19/2015 6:31 PM (GMT-05:00) To: krnet at list.krnet.org Subject: KR> Brake Bleeding Got the brake lines reconnected to the main wheel brake cylinders on my KR-2 today. Had to extend the Nylaflo tubing 1-1/2 inches due to moving the wheels 3 inches further

KR> Brake Bleeding

2015-01-19 Thread Sid Wood
Got the brake lines reconnected to the main wheel brake cylinders on my KR-2 today. Had to extend the Nylaflo tubing 1-1/2 inches due to moving the wheels 3 inches further aft. I can see why some manufacturers pipe the top of the master cylinder back to a reservoir. Bleeding the brake system

KR> Brake bleeding

2011-02-15 Thread laser...@juno.com
I used to do brakes (Rosenhaun) from the bottom up but dirty oil and particulates settle to the bottom of the lines - so pumping it right back up through the system doesn't seem the best way to me - besides I always made a mess in the cockpit AND at the bottom as a hose comes off from squeezing too