ngford via
> KRnet
> Sent: Monday, April 6, 2020 11:13 AM
> To: Kevin Stolhammer via KRnet
> Cc: Mark Langford
> Subject: Re: KR> Aileron length
>
>
> Kevin Stolhammer via KRnet wrote:
>
> My memory says 72". According to page 79 of my plans, the drawing sho
72" is correct per Drawing "W2" of the KR2S plans.
Thanks,
Rob Schmitt
-Original Message-
From: KRnet On Behalf Of Mark Langford via
KRnet
Sent: Monday, April 6, 2020 11:13 AM
To: Kevin Stolhammer via KRnet
Cc: Mark Langford
Subject: Re: KR> Aileron length
Ke
And sheet "W2" of the "big" KR2S drawings shows the ailerons to be 72",
at least on the KR2S, with the same 5" chordwise cut at the outboard
end, 7" inboard chordwise. I believe the KR2 and KR2S have the same
ailerons
Mark Langford
m...@n56ml.com
http://www.n56ml.com
__
Kevin Stolhammer via KRnet wrote:
My memory says 72". According to page 79 of my plans, the drawing shows
all the way from the inboard edge to within about two inches of the end
of the wing (not counting the tip). It's not dimensioned, but there's a
5" deep dimension there to give chordwis
I am nearly ready to cut the ailerons from the outer wing panels but I
cannot find the length specified in the plans (KR 2)? I know that just
because I dont see it doesnt meen its not there...
___
Search the KRnet Archives at https://www.mail-archive.com
5 matches
Mail list logo
