KR> 1/4" aluminum tubing adapaters

2014-01-29 Thread Joe. E. Wallace
Thanks much to all who respondedI will look at all suggested sites and then decide the route... tnx again, jw Joe. E. Wallace jwallacep51 at gmail.com On Jan 29, 2014, at 5:33, Mark Langford wrote: > Joe Wallace wrote: > >> Am working on the fuel system and using alum lines from the t

KR> 1/4" aluminum tubing adapaters

2014-01-29 Thread tommy waymack
Looked at ML'sweb page,great documentation,and saw the part about Ellison carb diaphrams.I had a diaphram go bad.It developed a leak,probably from old age.The good news is it will give you plenty of warning.The engine would not run at high power settings.After some head scratching I asked an engine

KR> 1/4" aluminum tubing adapaters

2014-01-29 Thread Mark Langford
Joe Wallace wrote: > Am working on the fuel system and using alum lines from the two wing tanks > to a central location and pump to the main looking for fittings and > don't understand and can't find what I think should be in the > catalogs. need suggestions.. using 1/4 line... I su