Steve is it just the boat you have built or do you have th tali feathers to?
i made wings to RR plans 72 circa and is there to
double check the
W/O ? I used the tw to hold them. But is there anyway to measure for
accuritethey are check the archive nothing to check W/O after youv'e put them
togaterg and glassed wing skins.
They never answer the phone about the only way to ctc RR is to fax them!
Mark look all over Van's catalog for
ES85615-157-1 flap motor
for belly board n luck. Look for a phone
couldn't find one?
Do they have a phone or anyway to ctc them
Larry
Could you email your inst panel pic?
thanks Bill
renosad...@aol.com
Mark Jones in the archive you listed
grtting your belly board
Linear actuator from Van's aircraft ck all
over there web site no
luck can you tell me which catalog yu
order it from?
Could anyone give the recamended size of the piano ailron
piano hing?
ACS thr largest they carry is 2" thats only an 1" on the wing
and 1" on thw
aliron shouldn't about two " on each side ?
Dan is there an email or mail address requesting the forms for the N number
Is there anyway to check the washout when the wings are finished ? Not sure
they were set right, If it's wrong is it easier to just start over new spars
ribs cover ect..
this is on a KR1 project...
Gene thanks for your help I'm also in the PBR so the jack sounds just fine,
just tell me i don't
have to rebuild spars (i'm orig ftom Cheyenne Wyo maybe that's why i need
pictures
Email add _RENOSADLER@AOL.COM_ (mailto:renosad...@aol.com) . i have serched
the archives for this problem
hope
A couple of days before Christmas there a few messages posted
about the the suport of the rear spars with the concese being
don't lose any sleep over it. But wouldn't this effect the washout with a lot
of movement in them? Check archives couldn't find anything on this...
yes i have, my plans are about 30yrs old but the only thing they mention is
the aileron spars
measures at 5' with inboard trailing edege in at 7" outboard into 5"
Iwould like to order one two if you find a ctc to order Thanks Bill
Still looking for a KR1 cowling with revmaster engine if anyone has one
email and I'll ctc you
Thanks Bill
video did you know your ph is not working might have it check out
John if you ever find any premolded parts for KR1 I'd like to be the seconed
person to know!!
Thanks Bill
Doe's anybody have an email ad or ph# for Todds canopy Thanks Bill
I have seacherd through the archives about the length to cut your ailerons
on a KR1; as is in
Richard Shriley's KR1 but no length mention, ive been told anywhere from
4.5ft. to 6'
my outboard wings are 5ft long any suggestions thanks Bill...
Back to my original question doe's anybody krnow the exact length to cut the
ailerons on orig KR1 plans Thanks Again Bill
Thank you Mark, always be safe Bill
Is the counter weights on both ailerons or just one thanks bill
Is the counter weight for the ailerons on both or just one of them? thanks
Get any thoughts on a revmaster 2100d which has been compelety rebuilt (new
crank) puts
out about 80 HP with the flowmaster injector carb?
Mark, the one I have the #is 44677 operating 4PSI made in Taiwan harbor
freight
haven't used it yet but will give it a try...Bill
Can anyone tell me the lenth parts # & rod bearing size on bell crank and
aileron horn if you
used the orig plans ... thanks again
Dan Heath SC. i thank you for all your help< I'm new at this building yours
abd jerry web page have been a big help eberyone at KRNET been a BIG and I
thank you ALL...
Bill IN reno
anybody answer a quick
question re ailrons how many bolts attaching piano hing to back of
pruce spar and size of bolt type of nut , is the hole in the piano hinge
counter sunk
Thanks for all help Bill
lee where are you at in mesa here for an airline reunion like to look at your
two if ok
thanks bill renosad...@aol.com
Any chance someone has a kr2 around i could get some stick time?
all help would be greatly appr. Thanks Bill
kepp up the good workC&B let me know how your spin tests go
Ive been thinking about shorting up Ailrons on Kr1 which is already super
sensitive.
Anybpdy know of a KR1 cowling for sale leave message will ctc off net
I;M LOCATED IN rENO NV NEAR STEAD AIRFIELD HOME OF TH RENO AIR
RACESTHANKD BILL
Live in Reno if if any fkying KR'S ARE AROUNF HERE
ttHANKS bILL
Hello
anybody is there anyway to ck the washout after youve assembled the outboard
wings?
( in my plans says to mount pitot tube on outboard nose rib it seems to me
that you;d have
to up hook tubing everytime you took the wings off.. It also calls for
mounting on right of plane which hase all the prop wash (it seems) any help
would
be greatly appre
I have an old warnake prop that i'd like to have checked for airthiness
tryied to find warnake no luck anybody know if there
still in busniess
Or who doe's this sort of work? thanks Bill
Thanks for info on the warnke prop, going to PHX next week will call Bernie
tell him ya said Hi.
Anyone know of good outfit to get lights from nav, strobe,landing ect
Would there be a turning problem if you shortened your alirno space from 5
feet to four on a KR-1? ""
Would the cowling fit a kr1 ? also your pre moulded fuel tank is that the
top dec aft of firewall? ya got any wings? let me krnow RENOSADLER@aok,com
Joe i'm in reno nv
SEW LADY WELL BE COMMING TO PHX NEXT WEEK WHAT KIND OF PARTS YOU GOT FOR
SALE
WHAT KIND OF PARTS YOU GOT FOR SALE
RAY COULD YOU FIND OUT WHERE YOU GOT YOUR COWLING FOR THE KR1 AND POST IT
THANKS BILL
I'm looking to buy a pair of wings for a kr1 i beleive two's might fit
Thanks Bill
email renosad...@aol.com
looking for some wings to buy
looking for a pair of wings for kr1
lookin for a set of plans for front deck and turttle deck for kr1,have an
old set circa 1971/2
can just bearly read. if anyone could direct me in that direction. thanks
Bill renosad...@aol.com
49 matches
Mail list logo
