KR> Removable Front Deck

2016-05-06 Thread Gary Shubert
I have been considering making my front deck and the area under it removable as well There is a discussion of the pros and cons of this on the Flybaby web site. The Flybaby boat is very similar to a KR There was also a write up of an instrument panel rework where a portion of the cockpit floo

KR> Rudder Stops

2015-06-10 Thread Gary Shubert
The 150/152 rudder stops on the rudder horn was in response to loss of control issues during training specifically spin training The original stops were much smaller and could jump over the adjustment stop resulting in jammed rudder and several deaths Regarding stress on cables as a former 152

KR> Hiney placement KR2 - Single

2010-01-19 Thread Gary Shubert
I make about 2 Mark Langfords tipping the scale at 240. Gary Shubert East Hampton, CT 06424

KR> info wing skins

2009-05-16 Thread Gary Shubert
ow to get resin to set up. Likely next week it will be too hot and the stuff will go off while I am still mixing it. Nice place, but building in a drafty unheated barn makes for a short airframe construction season. Gary Shubert KR2 - Corvair Last question

KR> Venturi on a KR2S

2009-03-01 Thread Gary Shubert
busy lives to provide helpful information in response to a question or even a dumb idea. Thanks Again Gary Shubert KR2 - One step closer to finished

KR> Venturi on a KR2S

2009-02-24 Thread Gary Shubert
List-Post: krnet@list.krnet.org Date: Mon, 23 Feb 2009 John Gotschall wrote: >You can try the method I used, ... Look for a link to "vaccuum system" at >http://www.mykr2.com Thanks that is exactly the type of information I was looking for. Gary

KR> Venturi on a KR2S

2009-02-23 Thread Gary Shubert
that I should buy, but if some sort of construction information is available then that would be a big help. Gary Shubert Single Place KR2 -N325JG Some Day

KR> KR2 / Gas welding - Welding in Gereral

2008-11-23 Thread Gary Shubert
r 5000 series Al then the "Factory Rep" WILL be prepared to answer those questions and will likely have some type of specific freebee targeted to the person with the question. Just some thoughts. Gary Shubert - Connecticut KR2 - Single Place Too cold to work in the barn. Instrument panel in the dinning room AFTER Thanksgiving

KR> eBay Motors: DRAWINGS of small double plane KR2

2008-10-16 Thread Gary Shubert
builder of a KR will likely be a purchaser. Don't even get me started talking about use of others IP for "experimental use or archiving". Thanks again to all those who have or are going before me. BTW as Oct-16-08 10:38:37 PDT someone hit the buy it now I sure hope it wasn't a