Jeff,
Thanks. This clears a lot of things up. The photos on your link below says
a lot. One question I have and
may have misinterpreted your sentence where you say you installed the
canopy from the inside. I presume
the 1/4 holes are to allow flox to flow through for gripping strength. So
how did y
It is also probably worth noting there is a thin plywood plate fitted into the
bottom of the canopy rail where it mates with the longeron to aid in stiffening
the sides of the canopy frame. The plywood plate was marked and cut to be a
perfect match with the top of the longerons so the canopy fr
Mark,
I put a DragonFly canopy in the Rand KR-2S Top Deck molded canopy frame. It
has glass over foam stiffeners along the sides and a glass over foam arch built
into the back of the canopy frame to keep the frame rigid. The gas struts are
bolted to aluminum plates that are floxed into the gl
Hello All,
I am in need of your help if you have attached a premolded Rand canopy
frame to the canopy and how did you stiffen up the assembly. Right now I am
torn as how to proceed with this step. This is totally different than the
canopy frame I built on N886MJ.this is why I need your help.
Th
Tommy I just looked at your Craigslist ad. At that price I would be willing to
bet it sells today on the KR Net.
Mark Jones
Oldsmar, Fl
N771MJ “WunderBird”
www.flykr2s.com
flyk...@gmail.com
> On Jun 16, 2019, at 12:46 PM, Tommy Waymack via KRnet
> wrote:
>
_
Have a Dielh nose wheel assembly for the KR 2 I put back for future
use.Thought it might come in handy in my old age.The plane was sold in
2017,and now it will go to someone with an airplane.If one of the builders
or flyers would like a real deal on an assembly,contact me at 870-267-0543
and leave
6 matches
Mail list logo
