On Fri, 09 Jun 2023, Animesh Manna wrote:
> For DP alt mode display driver get the information
> about cable speed and cable type through TCSS_DDI_STATUS
> register which will be updated by type-c platform driver.
> Accodingly Update dpcd 0x110 with cable information before
> link training start.
Currently we do not check if there is enough bandwidth for
audio, and what channels and freq it can really support.
Also sometimes there can be HW constraints e.g. GLK where audio
channels supported are only 2.
https://patchwork.freedesktop.org/series/107647/
Obtain the optimal audio rate and cha
Add source audio-related config params in crtc_state.
These params can be supported frequency, supported channel,
and audio support, which can be further computed based on
source capabilities.
Signed-off-by: Mitul Golani
---
drivers/gpu/drm/i915/display/intel_display_types.h | 12 +---
1
Compute SADs that takes into account the supported rate and channel
based on the capabilities of the audio source. This wrapper function
should encapsulate the logic for determining the supported rate and
channel and should return a set of SADs that are compatible with the
source.
Signed-off-by: M
Update access of has_audio param from crtc_state pointer
as it is wrapped under audio_config.
Signed-off-by: Mitul Golani
---
drivers/gpu/drm/i915/display/g4x_dp.c| 4 ++--
drivers/gpu/drm/i915/display/g4x_hdmi.c | 16
drivers/gpu/drm/i915/display/intel_aud
Initialize the audio capabilities for HDMI by setting them to their
maximum supported values and then call a function to compute these
capabilities into SADs. The audio capabilities for HDMI include
parameters such as supported frequency and channel configurations.
By computing these capabilities i
We are preparing for Xe driver. Stolen memory handling will be
different in Xe driver. Due to this we want to remove all stolen
memory handling details away from FBC code.
Cc: Jani Nikula
Cc: Rodrigo Vivi
Cc: Ville Syrjälä
Cc: Maarten Lankhorst
Jouni Högander (3):
drm/i915: Move stolen memo
We are preparing for Xe. Xe stolen memory handling differs from i915 so we
want to move stolen memory handling details into i915_gem_stolen.
Also add a common type for fbc compressed fb and use it from fbc code
instead of underlying type directly. This way we can have common type
i915_stolen_fb fo
As a preparation for Xe change stolen memory initialization check to be
done in use-time instead of during initialization.
In case of xe, stolen memory is initialised much later so it can't be
checked during init. There is no specific reason to check this in init for
i915 either -> perform the che
As a preparation for Xe move HW fence details away from intel_fbc code.
Add new functions to check support for legacy fencing and fence id and use
these in fbc code. Xe doesn't support legacy fencing.
Signed-off-by: Jouni Högander
---
drivers/gpu/drm/i915/display/intel_fbc.c | 12 ++--
d
== Series Details ==
Series: Get optimal audio frequency and channels
URL : https://patchwork.freedesktop.org/series/119121/
State : warning
== Summary ==
Error: dim sparse failed
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
+./arch/x86/include/asm/bitops.h:1
On Thu, 08 Jun 2023, Gil Dekel wrote:
> The ternary expression:
>
> x ? : y
>
> is a GCC extension and is not a part of C/C++ standard.
>
> Use the canonical form instead to reduce dependency over GCC extension.
Thanks for the patch, but no thanks, we'll keep it as it is.
It's acceptable use o
On Thu, 08 Jun 2023, Ville Syrjälä wrote:
> On Fri, Jun 02, 2023 at 05:41:50PM +0300, Jani Nikula wrote:
>> This reflects current code, but apparently commit e341c618acde
>> ("drm/i915/adl_s: Initialize display for ADL-S") stopped initializing
>> DSI for ADL-S. It does support DSI.
>
> Not accordi
On Fri, 09 Jun 2023, Mitul Golani wrote:
> Add source audio-related config params in crtc_state.
> These params can be supported frequency, supported channel,
> and audio support, which can be further computed based on
> source capabilities.
>
> Signed-off-by: Mitul Golani
> ---
> drivers/gpu/dr
On Fri, 09 Jun 2023, Mitul Golani wrote:
> Add source audio-related config params in crtc_state.
> These params can be supported frequency, supported channel,
> and audio support, which can be further computed based on
> source capabilities.
>
> Signed-off-by: Mitul Golani
> ---
> drivers/gpu/dr
On Fri, 09 Jun 2023, Mitul Golani wrote:
> Update access of has_audio param from crtc_state pointer
> as it is wrapped under audio_config.
This should be squashed with the change moving the member in order to
not break the build.
BR,
Jani.
>
> Signed-off-by: Mitul Golani
> ---
> drivers/gpu/d
== Series Details ==
Series: Move stolen memory handling details into i915_gem_stolen
URL : https://patchwork.freedesktop.org/series/119123/
State : warning
== Summary ==
Error: dim checkpatch failed
7c50baebe654 drm/i915: Move stolen memory handling into i915_gem_stolen
-:42: WARNING:AVOID_BU
== Series Details ==
Series: Move stolen memory handling details into i915_gem_stolen
URL : https://patchwork.freedesktop.org/series/119123/
State : warning
== Summary ==
Error: dim sparse failed
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
Hi Carl,
> > > besides this, ask a dumb question.
> > > How we retrieve the pat_index from a shared resource though dma_buf fd?
> > > maybe we need to know whether it could be CPU cached if we want map it.
> > > Of course, looks there are no real usage to access it though CPU.
> > > Just use it di
== Series Details ==
Series: drm/i915/display/dp: On AUX xfer timeout restart freshly (rev2)
URL : https://patchwork.freedesktop.org/series/119055/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13249_full -> Patchwork_119055v2_full
=
On 09/06/2023 05:16, Iddamsetty, Aravind wrote:
On 08-06-2023 20:21, Tvrtko Ursulin wrote:
From: Tvrtko Ursulin
In order to show per client memory usage lets start tracking which
objects belong to which clients.
We start with objects explicitly created by object creation UAPI and
track it o
From: Tvrtko Ursulin
I added tracking of most classes of objects which contribute to client's memory
footprint and accouting along the similar lines as in Rob's msm code. Then
printing it out to fdinfo using the drm helper Rob added.
Accounting by keeping per client lists may not be the most eff
From: Tvrtko Ursulin
In order to show per client memory usage lets start tracking which
objects belong to which clients.
We start with objects explicitly created by object creation UAPI and
track it on a new per client lists, protected by a new per client lock.
In order for delayed destruction (
From: Tvrtko Ursulin
For dma_fence_is_signaled signaling critical path annotations are an
annoying cause of false positives when using dma_fence_is_signaled and
indirectly higher level helpers such as dma_resv_test_signaled etc.
Drop the critical path annotation since the "is signaled" API does
From: Tvrtko Ursulin
Account page table backing store against the owning client memory usage
stats.
Signed-off-by: Tvrtko Ursulin
---
drivers/gpu/drm/i915/gt/intel_gtt.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/i915/gt/intel_gtt.c
b/drivers/gpu/drm/i915/gt/int
From: Tvrtko Ursulin
To enable accounting of indirect client memory usage (such as page tables)
in the following patch, lets start recording the creator of each PPGTT.
Signed-off-by: Tvrtko Ursulin
---
drivers/gpu/drm/i915/gem/i915_gem_context.c | 11 ---
drivers/gpu/drm/i915/gem
From: Tvrtko Ursulin
Account ring buffers and logical context space against the owning client
memory usage stats.
Signed-off-by: Tvrtko Ursulin
---
drivers/gpu/drm/i915/gem/i915_gem_context.c | 6 ++
drivers/gpu/drm/i915/i915_drm_client.c | 10 ++
drivers/gpu/drm/i915/i915_dr
From: Tvrtko Ursulin
We want to be able to show memory usage of imported dma-buf opjects in the
fdinfo stats.
To achieve this we wrap drm_gem_prime_fd_to_handle(_obj) in
i915_gem_prime_fd_to_handle and append some client management at the end.
Signed-off-by: Tvrtko Ursulin
Cc: Aravind Iddamset
From: Tvrtko Ursulin
I need a new flavour of the drm_gem_prime_fd_to_handle helper, one which
will return a reference to a newly created GEM objects (if created), in
order to enable tracking of imported i915 GEM objects in the following
patch.
Minor code reshuffule and only trivial additions on
From: Tvrtko Ursulin
Use the newly added drm_print_memory_stats helper to show memory
utilisation of our objects in drm/driver specific fdinfo output.
To collect the stats we walk the per memory regions object lists
and accumulate object size into the respective drm_memory_stats
categories.
Obj
Hi,
On 2023/6/9 03:12, Bjorn Helgaas wrote:
Start with verb and capitalize to match ("Deal only with ...")
On Thu, Jun 08, 2023 at 07:43:21PM +0800, Sui Jingfeng wrote:
From: Sui Jingfeng
vgaarb only deal with the VGA devcie(pdev->class == 0x0300), so replace the
pci_get_subsys() function wi
>From PICA message bus we wait for acknowledgment from
read/write commands. In case of an error, we reset the
bus for the next command.
Current implementation ends up resetting message bus twice
in cases where error is not the timeout. Since, we only need
to reset message bus once, let's move rese
On 09-06-2023 17:41, Tvrtko Ursulin wrote:
> From: Tvrtko Ursulin
>
> I need a new flavour of the drm_gem_prime_fd_to_handle helper, one which
> will return a reference to a newly created GEM objects (if created), in
> order to enable tracking of imported i915 GEM objects in the following
> pa
== Series Details ==
Series: fdinfo memory stats (rev2)
URL : https://patchwork.freedesktop.org/series/119082/
State : warning
== Summary ==
Error: dim checkpatch failed
67ba6f7b318b dma-fence: Bypass signaling annotation from dma_fence_is_signaled
bc390e8b6613 drm/i915: Track buffer objects b
== Series Details ==
Series: fdinfo memory stats (rev2)
URL : https://patchwork.freedesktop.org/series/119082/
State : warning
== Summary ==
Error: dim sparse failed
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
Visible glitches have been observed when running graphics applications on
Linux under Xen hypervisor. Those observations have been confirmed with
failures from kms_pwrite_crc Intel GPU test that verifies data coherency
of DRM frame buffer objects using hardware CRC checksums calculated by
display
On 09.06.23 15:01, Janusz Krzysztofik wrote:
Visible glitches have been observed when running graphics applications on
Linux under Xen hypervisor. Those observations have been confirmed with
failures from kms_pwrite_crc Intel GPU test that verifies data coherency
of DRM frame buffer objects usin
== Series Details ==
Series: drm/i915/mtl: Cleanup usage of phy lane reset
URL : https://patchwork.freedesktop.org/series/119138/
State : warning
== Summary ==
Error: dim checkpatch failed
2c4d880e398d drm/i915/mtl: Cleanup usage of phy lane reset
-:58: WARNING:LONG_LINE: line length of 104 ex
== Series Details ==
Series: fbcon: Reschedule cursor worker if try lock fails
URL : https://patchwork.freedesktop.org/series/119060/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13249_full -> Patchwork_119060v1_full
Summa
On 09/06/2023 13:44, Iddamsetty, Aravind wrote:
On 09-06-2023 17:41, Tvrtko Ursulin wrote:
From: Tvrtko Ursulin
I need a new flavour of the drm_gem_prime_fd_to_handle helper, one which
will return a reference to a newly created GEM objects (if created), in
order to enable tracking of importe
From: Ville Syrjälä
Fix all the obvious issues affecting HSW/BDW PSR1 and
restore it back to life.
The PC8+ vs. init_clock_gating() problem also affects
some non-PSR workarounds as well.
v2: Rebase (due to irq code movement mostly)
Deal with review comments wrt. the AUX setup
Ville Syrjälä
From: Ville Syrjälä
PC8+ clobbers a bunch of displays registers which need to
be restored by hand or else we lost a bunch of workarounds.
The important ones for us are at least CHICKEN_PAR2* and
CHICKEN_PIPESL*.
Curiously at least some CHICKEN_PAR1* registers
are preserved by the hardware/firmwa
From: Ville Syrjälä
The multiplication got replaced by an addition in some cleanup.
This means we never write the correct data to some of the BDW
PSR data registers and thus we fail to actually wake up the
panel from PSR.
Fixes: 4ab4fa103217 ("drm/i915/psr: Make PSR registers relative to transco
From: Ville Syrjälä
In preparation for re-introducing HSW's different PSR1 register
offeets let's just wrap all the registers into functions.
Avoids having to make the register macros more complex.
Signed-off-by: Ville Syrjälä
---
drivers/gpu/drm/i915/display/intel_psr.c | 99 -
From: Ville Syrjälä
Add back hsw'w special SRD/PSR1 registers.
Signed-off-by: Ville Syrjälä
---
drivers/gpu/drm/i915/display/intel_psr.c | 20 +++
drivers/gpu/drm/i915/display/intel_psr_regs.h | 4
2 files changed, 20 insertions(+), 4 deletions(-)
diff --git a/drive
From: Ville Syrjälä
Reintroduce the special PSR AUX CH setup for hsw/bdw. Not all
of it was even removed (BDW AUX data registers were left behind).
Update the code to use REG_BIT() & co. while at it.
v2: Define the SRD_AUX_CTL bits in terms of DP_AUX_CTL bits (Jouni)
Add a comment explaining
From: Ville Syrjälä
Deal with HSW/BDW in transcoder_has_psr2().
Signed-off-by: Ville Syrjälä
---
drivers/gpu/drm/i915/display/intel_psr.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c
b/drivers/gpu/drm/i915/display/intel_psr.c
From: Ville Syrjälä
Add the PSR interrupt handling code back for HSW. Looks like
the removal was never completed anyway since the irq setup
code was lest untouched.
Signed-off-by: Ville Syrjälä
---
drivers/gpu/drm/i915/display/intel_display_irq.c | 14 ++
1 file changed, 14 inserti
From: Ville Syrjälä
Implement WaPsrDPAMaskVBlankInSRD:hsw, which makes the hardware
generate the extra vblank between link training and first frame
being transmitted. This is the same thing that's controlled by
TRANS_CHICKEN[21] on skl+ (but due to the funky double buffering
it's effectively alwa
From: Ville Syrjälä
Bspec asks us to unmask "vblank to registers" in the DPRS unit.
Note that I was unable to observe any change in hardware
behviour due to this bit on HSW. But let's do this anyway
in case it matters in some cases, and the corresponding bit
on BDW is abolutely critical as witho
From: Ville Syrjälä
hsw/bdw lack the pipe register vs. display register distinction
in their PSR masking capabilities. So to keep our CURSURFLIVE
tricks working we need to just unmask all display register writes
on these platforms. The downside being that any display regitster
(eg. even SWF regs)
From: Ville Syrjälä
WA 0479 says: "Do not skip both TP1 and TP2/TP3". Let's just
stick the minimum 100us TP2/3 time in there to avoid that.
Signed-off-by: Ville Syrjälä
---
drivers/gpu/drm/i915/display/intel_psr.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/i91
From: Ville Syrjälä
Can't see why we'd want the sprite blocking PSR entry.
Mask it out.
Signed-off-by: Ville Syrjälä
---
drivers/gpu/drm/i915/display/intel_display.c | 4
drivers/gpu/drm/i915/display/intel_psr.c | 4
2 files changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/
From: Ville Syrjälä
All known issues fixed now, so re-enable PSR1 on hsw/bdw.
Signed-off-by: Ville Syrjälä
---
drivers/gpu/drm/i915/display/intel_display_device.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_display_device.c
b/drivers/gpu/drm/i915
== Series Details ==
Series: drm/i915/mtl: Fix spelling mistake "initate" -> "initiate"
URL : https://patchwork.freedesktop.org/series/119063/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13249_full -> Patchwork_119063v1_full
==
On Fri, Jun 09, 2023 at 12:13:58AM +, Liu, Yi L wrote:
> > Other than this and the couple other comments, the series looks ok to
> > me. We still need acks from Jason for iommufd on 3-5. Thanks,
>
> Thanks, perhaps one more version after getting feedback from Jason.
Yes, perhaps today I ca
> Hi Carl,
>
besides this, ask a dumb question.
How we retrieve the pat_index from a shared resource though dma_buf fd?
maybe we need to know whether it could be CPU cached if we want map it.
Of course, looks there are no real usage to access it though CPU.
Just use it dire
== Series Details ==
Series: x86/mm: Fix PAT bit missing from page protection modify mask (rev3)
URL : https://patchwork.freedesktop.org/series/116883/
State : warning
== Summary ==
Error: dim sparse failed
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
== Series Details ==
Series: drm/i915/psr: Restore HSW/BDW PSR1 (rev2)
URL : https://patchwork.freedesktop.org/series/116814/
State : warning
== Summary ==
Error: dim checkpatch failed
8d0ed154f842 drm/i915: Re-init clock gating on coming out of PC8+
611fbc172ab6 drm/i915/psr: Fix BDW PSR AUX
== Series Details ==
Series: drm/i915/psr: Restore HSW/BDW PSR1 (rev2)
URL : https://patchwork.freedesktop.org/series/116814/
State : warning
== Summary ==
Error: dim sparse failed
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
+./arch/x86/include/asm/bitops.h:
On Fri, Jun 09, 2023 at 10:27:39AM +0800, Sui Jingfeng wrote:
> On 2023/6/9 03:19, Bjorn Helgaas wrote:
> > On Thu, Jun 08, 2023 at 07:43:22PM +0800, Sui Jingfeng wrote:
> > > From: Sui Jingfeng
> > >
> > > The vga_is_firmware_default() function is arch-dependent, which doesn't
> > > sound right.
On 6/8/2023 4:07 PM, Alan Previn wrote:
Ensure intel_gsc_uc_fw_init_done and intel_gsc_uc_fw_proxy_init
takes a wakeref before reading GSC Shim registers.
NOTE: another patch in review also adds a call from selftest to
this same function. (https://patchwork.freedesktop.org/series/117713/)
whi
tree/branch:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
branch HEAD: 53ab6975c12d1ad86c599a8927e8c698b144d669 Add linux-next specific
files for 20230609
Error/Warning reports:
https://lore.kernel.org/oe-kbuild-all/202306081708.gtvacxsh-...@intel.com
https
== Series Details ==
Series: series starting with [1/2] drm/i915/dp: Use LINK_QUAL_PATTERN_* Phy
test pattern names
URL : https://patchwork.freedesktop.org/series/119106/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_13255 -> Patchwork_119106v1
===
== Series Details ==
Series: drm/i915/dp: Cable type identification for DP2.1
URL : https://patchwork.freedesktop.org/series/119109/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13255 -> Patchwork_119109v1
Summary
---
On Fri, Jun 9, 2023 at 7:12 AM Tvrtko Ursulin
wrote:
>
>
> On 09/06/2023 13:44, Iddamsetty, Aravind wrote:
> > On 09-06-2023 17:41, Tvrtko Ursulin wrote:
> >> From: Tvrtko Ursulin
> >>
> >> I need a new flavour of the drm_gem_prime_fd_to_handle helper, one which
> >> will return a reference to a
== Series Details ==
Series: series starting with [1/3] drm/i915: copy-paste the extra warnings from
scripts/Makefile.extrawarn
URL : https://patchwork.freedesktop.org/series/119067/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13250_full -> Patchwork_119067v1_full
=
== Series Details ==
Series: Get optimal audio frequency and channels
URL : https://patchwork.freedesktop.org/series/119121/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13256 -> Patchwork_119121v1
Summary
---
**SUC
== Series Details ==
Series: Move stolen memory handling details into i915_gem_stolen
URL : https://patchwork.freedesktop.org/series/119123/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_13256 -> Patchwork_119123v1
Summary
Currently we do not check if there is enough bandwidth for
audio, and what channels and freq it can really support.
Also sometimes there can be HW constraints e.g. GLK where audio
channels supported are only 2.
https://patchwork.freedesktop.org/series/107647/
Obtain the optimal audio rate and cha
To enhance the relationship between the has_audio and the source
audio parameter, create a separate crtc_state audio property and
add the has_audio parameter into it. Additionally, update the
access of the has_audio parameter from the crtc_state pointer as
it is wrapped under the audio. These modif
Compute SADs that takes into account the supported rate and channel
based on the capabilities of the audio source. This wrapper function
should encapsulate the logic for determining the supported rate and
channel and should return a set of SADs that are compatible with the
source.
--v1:
- call int
Initialize the source audio capabilities for HDMI in crtc_state
property by setting them to their maximum supported values,
including max_channel and max_frequency. This allows for the
calculation of HDMI audio source capabilities with respect to
the available mode bandwidth. These capabilities enc
Hi @Jani Nikula
> -Original Message-
> From: Jani Nikula
> Sent: 09 June 2023 15:08
> To: Golani, Mitulkumar Ajitkumar ;
> intel-gfx@lists.freedesktop.org
> Subject: Re: [Intel-gfx] [RFC 1/4] drm/i915/hdmi: Add audio config related
> params in crtc_state
>
> On Fri, 09 Jun 2023, Mitul Go
On 2023/6/10 00:48, Bjorn Helgaas wrote:
On Fri, Jun 09, 2023 at 10:27:39AM +0800, Sui Jingfeng wrote:
On 2023/6/9 03:19, Bjorn Helgaas wrote:
On Thu, Jun 08, 2023 at 07:43:22PM +0800, Sui Jingfeng wrote:
From: Sui Jingfeng
The vga_is_firmware_default() function is arch-dependent, which do
Hi @Jani Nikula
> -Original Message-
> From: Jani Nikula
> Sent: 09 June 2023 15:06
> To: Golani, Mitulkumar Ajitkumar ;
> intel-gfx@lists.freedesktop.org
> Subject: Re: [Intel-gfx] [RFC 1/4] drm/i915/hdmi: Add audio config related
> params in crtc_state
>
> On Fri, 09 Jun 2023, Mitul Go
Hi @Jani Nikula
> -Original Message-
> From: Jani Nikula
> Sent: 09 June 2023 15:09
> To: Golani, Mitulkumar Ajitkumar ;
> intel-gfx@lists.freedesktop.org
> Subject: Re: [Intel-gfx] [RFC 2/4] drm/i915/display: Update access of
> has_audio param
>
> On Fri, 09 Jun 2023, Mitul Golani
> wr
== Series Details ==
Series: fdinfo memory stats (rev2)
URL : https://patchwork.freedesktop.org/series/119082/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_13256 -> Patchwork_119082v2
Summary
---
**FAILURE**
Seri
== Series Details ==
Series: drm/i915/mtl: Cleanup usage of phy lane reset
URL : https://patchwork.freedesktop.org/series/119138/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13256 -> Patchwork_119138v1
Summary
---
On 6/2/23 8:16 AM, Yi Liu wrote:
> Existing VFIO provides group-centric user APIs for userspace. Userspace
> opens the /dev/vfio/$group_id first before getting device fd and hence
> getting access to device. This is not the desired model for iommufd. Per
> the conclusion of community discussion[1],
== Series Details ==
Series: x86/mm: Fix PAT bit missing from page protection modify mask (rev3)
URL : https://patchwork.freedesktop.org/series/116883/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13256 -> Patchwork_116883v3
===
== Series Details ==
Series: drm/i915/psr: Restore HSW/BDW PSR1 (rev2)
URL : https://patchwork.freedesktop.org/series/116814/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13256 -> Patchwork_116814v2
Summary
---
**SU
== Series Details ==
Series: Get optimal audio frequency and channels (rev2)
URL : https://patchwork.freedesktop.org/series/119121/
State : warning
== Summary ==
Error: dim sparse failed
Sparse version: v0.6.2
Fast mode used, each commit won't be checked separately.
+./arch/x86/include/asm/bit
== Series Details ==
Series: Get optimal audio frequency and channels (rev2)
URL : https://patchwork.freedesktop.org/series/119121/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13257 -> Patchwork_119121v2
Summary
---
We were skipping when min_softlimit was equal to RPn. We need to apply
it rergardless as efficient frequency will push the SLPC min to RPe.
This will break scenarios where user sets a min softlimit < RPe before
reset and then performs a GT reset.
Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC
Hi Bjorn,
On Thu, 2023-06-08 at 15:52 -0500, Bjorn Helgaas wrote:
> On Tue, Apr 11, 2023 at 02:33:23PM -0700, David E. Box wrote:
> > In commit f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and
> > LTR") the VMD driver calls pci_enabled_link_state as a callback from
> > pci_bus_walk. B
On Fri, Jun 09, 2023 at 03:09:26PM -0700, David E. Box wrote:
> Hi Bjorn,
>
> On Thu, 2023-06-08 at 15:52 -0500, Bjorn Helgaas wrote:
> > On Tue, Apr 11, 2023 at 02:33:23PM -0700, David E. Box wrote:
> > > In commit f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and
> > > LTR") the VMD
== Series Details ==
Series: drm/i915/guc/slpc: Apply min softlimit correctly
URL : https://patchwork.freedesktop.org/series/119162/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13257 -> Patchwork_119162v1
Summary
---
== Series Details ==
Series: drm/i915: implement internal workqueues (rev4)
URL : https://patchwork.freedesktop.org/series/118947/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13252_full -> Patchwork_118947v4_full
Summary
On Fri, 2023-06-09 at 17:46 -0500, Bjorn Helgaas wrote:
> On Fri, Jun 09, 2023 at 03:09:26PM -0700, David E. Box wrote:
> > Hi Bjorn,
> >
> > On Thu, 2023-06-08 at 15:52 -0500, Bjorn Helgaas wrote:
> > > On Tue, Apr 11, 2023 at 02:33:23PM -0700, David E. Box wrote:
> > > > In commit f492edb40b54 (
== Series Details ==
Series: drm/i915: further device info cleanups
URL : https://patchwork.freedesktop.org/series/119086/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_13253_full -> Patchwork_119086v1_full
Summary
---
== Series Details ==
Series: drm/i915/dsi: ICL+ DSI modeset sequence fixes (rev2)
URL : https://patchwork.freedesktop.org/series/116926/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13253_full -> Patchwork_116926v2_full
Su
== Series Details ==
Series: drm/i915: Fix a VMA UAF for multi-gt platform (rev7)
URL : https://patchwork.freedesktop.org/series/118887/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13253_full -> Patchwork_118887v7_full
Su
On Thu, 08 Jun 2023, Jani Nikula wrote:
> This is v6 of [1], creating i915->unordered_wq also for mock devices.
Pushed to drm-intel-next. Thanks for the patches and review.
This also superseeds [1], and finally removes the last user of
flush_scheduled_work().
Tetsuo, this will make its way to v
94 matches
Mail list logo
