On Wed, May 15, 2019 at 11:26:08PM +0200, Ricardo Wurmus wrote:
> It compiles Guile modules. Using compiled modules is faster than having
> to interpret everything. You can try without compiling changed modules
> but the performance penalty when you have lots of interpreted modules
> will likely
Doron Behar writes:
> Plus, do I have to run make after every change to a package definition!?
> Will it compile everything from the ground up after every such change? I
> wish these technical details would have been documented...
“make” does not cause recompilation of unchanged things. This
Doron Behar writes:
> On Wed, May 15, 2019 at 12:46:30PM +0200, Gábor Boskovits wrote:
>> > I ran the guix-daemon command:
>> >
>> > sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild
>> >
>>
>> This should only be needed if you don't run it from a service manager.
>> Changes to t
On 2019-05-15 18:33, Amirouche wrote:
Welcome Dordon,
On 2019-05-15 11:46, Doron Behar wrote:
[...]
I'd like to be convinced I'm wrong at least in this subject because as
I dive more and more into Guix I feel there have been made a lot of
poor
design choices in it..
That the usual fe
Welcome Dordon,
On 2019-05-15 11:46, Doron Behar wrote:
On Wed, May 15, 2019 at 10:46:29AM +0200, Gábor Boskovits wrote:
>
It might be easier to first set up a channel with your packages only.
You
can find
several examples out there.
Here is one of my channels:
https://gitlab.com/g_bor/nomi
> > There's so much room for improvements...
>
> Do you have a constructive suggestion for improving this section of the
> manual?
Not yet. I need to gain experience with the ecosystem and I hope to be
able then to think of better ways to organize the documentation. When
I'll be ready, I'd be hap
On Wed, May 15, 2019 at 12:46:30PM +0200, Gábor Boskovits wrote:
> > I ran the guix-daemon command:
> >
> > sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild
> >
>
> This should only be needed if you don't run it from a service manager.
> Changes to the daemon are rare, and most of
On Wed, May 15, 2019 at 12:41:45PM +0200, Gábor Boskovits wrote:
> > > Did you also run make?
> >
> > No! I was hoping I could avoid that as that's extremely CPU intensive..
> > Is there a way to run make with only the relevant targets? That could be
> > very helpful...
> >
> > Plus, do I have to r
Hello Doron,
Doron Behar ezt írta (időpont: 2019. máj. 15., Sze,
12:23):
> To add to my previous message, I'll note that after I `make` finally
> finished, I've encountered the same issue:
>
> I ran the guix-daemon command:
>
> sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild
>
Hello,
Doron Behar ezt írta (időpont: 2019. máj. 15., Sze,
11:47):
> Thanks for the quick reply!
>
> On Wed, May 15, 2019 at 10:46:29AM +0200, Gábor Boskovits wrote:
> > >
> > It might be easier to first set up a channel with your packages only. You
> > can find
> > several examples out there.
>
To add to my previous message, I'll note that after I `make` finally
finished, I've encountered the same issue:
I ran the guix-daemon command:
sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild
Afterwards, in a different shell, I ran
guix environment guix
And afterwards, finally:
On Wed, May 15, 2019 at 11:08:20AM +0200, pelzflorian (Florian Pelz) wrote:
> On Wed, May 15, 2019 at 11:06:54AM +0300, Doron Behar wrote:
> > To be more specific, I've tried this idea by writing the following in
> > `~/.config/guix/channels.scm`:
> >
> > (list (channel
> > (name 'guix)
>
Thanks for the quick reply!
On Wed, May 15, 2019 at 10:46:29AM +0200, Gábor Boskovits wrote:
> >
> It might be easier to first set up a channel with your packages only. You
> can find
> several examples out there.
> Here is one of my channels:
> https://gitlab.com/g_bor/nominatim-channel
Oh right
On Wed, May 15, 2019 at 11:06:54AM +0300, Doron Behar wrote:
> To be more specific, I've tried this idea by writing the following in
> `~/.config/guix/channels.scm`:
>
> (list (channel
> (name 'guix)
> (url "file:///var/code/doron/guix")))
>
It could be (url "/var/code/doron/guix
Hello Doron!
Doron Behar ezt írta (időpont: 2019. máj. 15., Sze,
10:09):
> Hey all,
>
> Coming from Arch Linux, I'm trying to add new packages and contribute
> them to the Guix project. However, I have a few doubts as for dictating
> a workflow and most importantly I can't seem to be able to act
Hey all,
Coming from Arch Linux, I'm trying to add new packages and contribute
them to the Guix project. However, I have a few doubts as for dictating
a workflow and most importantly I can't seem to be able to actually test
my new packages' definitions with `./pre-inst-env`.
First of all, I'm not
16 matches
Mail list logo
