Hi,
Le dimanche 12 janvier 2025 à 15:33 +0200, Roman Riabenko a écrit :
>
> Debian maintainers rejected a request to set the option in the past:
> https://bugs-devel.debian.org/cgi-bin/bugreport.cgi?bug=924794
>
> I downloaded the current Debian kernels from the stable release
> (Bookworm) and
Hi Roman,
Le jeudi 09 janvier 2025 à 23:34 +0200, Roman Riabenko a écrit :
>
> There are other ways to access the variables. You could try efivar to
> see whether the dumps are still reported by UEFI.
>
> $ guix shell efivar
> [env]$ efivar --list
> [env]$ exit
>
> The tool also allows removing
Hello Roman,
Le jeudi 09 janvier 2025 à 22:49 +0200, Roman Riabenko a écrit :
> >
> > Is the following console command correct?
> > sudo rm /sys/firmware/efi/efivars/dump-type0-*
>
> Yes, this is the command that removes the dump files.
>
I deleted the “dump” files from the directory
/sys/firm
Hi Roman,
Le jeudi 09 janvier 2025 à 22:24 +0200, Roman Riabenko a écrit :
> On Thu, 09 Jan 2025 21:15:22 +0100
> Christophe Pisteur wrote:
>
> > I have 218 (!) files begninning with "dump": do I delete them all
> > without distinction?
>
> Yes, that'
Hello Roman,
Thank you very much for your help.
Le jeudi 09 janvier 2025 à 22:05 +0200, Roman Riabenko a écrit :
> Hello Christophe
> >
> > I also had this issue recently. The device here is not the boot
> partition. Instead, the device here is the EFI itself.
Ah ok
>
> Check whether you have
Hi Felix,
Le jeudi 09 janvier 2025 à 11:38 -0800, Felix Lechner a écrit :
> >
> Can you run efibootmgr manually (in a shell)?
This is what the command produces in my console (but I don't know what
to do with it):
~$ sudo efibootmgr
Mot de passe :
BootCurrent:
Timeout: 0 seconds
BootOrder
09 janvier 2025 à 11:19 -0800, Felix Lechner a écrit :
> Hi Christophe,
>
> On Thu, Jan 09 2025, Christophe Pisteur wrote:
>
> > Could not prepare Boot variable [...] efibootmgr n'a pas réussi à
> > enregistrer l'entrée de démarrage: Erreur d'entrée/sortie.
>
Hello,
On my guix system, I did a simple guix pull then sudo guix system
reconfigure /etc/config.scm but at the end of the process, when
updating the boot loader, the following message appears in the console:
construction de /gnu/store/15g01mbkxmjhy5fbl1cnwazf5bs4p5yl-install-
bootloader.scm.drv
ges
I hope that these additional hints will help someone to find a solution
for this problem.
Christophe
Guix system 1.4 / 64 bits
Gnome 42.4 / X11
Intel® Core™2 T9900 × 2
Mobile Intel® GM45 Express Chipset (CTG)
Le mardi 07 mars 2023 à 23:49 +0100, Christophe Pisteur a écrit :
> Hi,
Hi,
I did a fresh install of Guix system 1.4, installed the evolution
package and then imported an evolution-backup archive made on a
previous guix system, which I did in the past several times
successfully, but this time the online accounts (Nextcloud: calendar,
address book) were not taken into
Thanks a lot, it works perfectly!
Christophe
Le lundi 15 août 2022 à 14:21 +, Luis Felipe a écrit :
> I forgot one step,
>
> On Monday, August 15th, 2022 at 14:15, Luis Felipe
> wrote:
>
> > I checked in my system (guix system 3f17158, kernel 5.18.12), and
> > saw the same: No font appears
Hello,
Since I use a profile based on kernel 5.18, the cantarell font is not
available in the gnome desktop interface (gnome-tweak / fonts): the
cantarell font is not listed in the list of available interface fonts.
When I revert to a profile based on a 5.17 kernel, the cantarell font
is available
Hello,
With gnome 3.34, I was using different extensions for gnome-shell,
especially the excellent "material-shell" (tiling manager among others
stuff) [1]
By switching to gnome 40, the extensions are not managed with gnome-
tweaks and I can't use any of my extensions.
Does anyone know how to h
Le samedi 30 octobre 2021 à 13:06 +, phodina a écrit :
> Hi Christophe,
>
> have you tried to run
>
> fc-cache -f
>
> to update the font cache to solve the issue?
>
> Petr
Thank you very much. This solved the problem inside my session, but:
- not in the gdm login screen, which still show
Hello,
I installed some time ago guix system (1.3) on a Lenovo libreboot with
the gnome desktop.
I made today:guix pullfollowed by sudo guix system reconfigure
/etc/config.scm
and I lost the cantarell fonts for the gnome desktop display. I then
selected (in gnome-tweaks) the available fonts (liber
Le dimanche 20 juin 2021 à 06:44 +0200, Christophe Pisteur a écrit :
> Problem with guix installation system 1.3:
> Hello,
> During the manual partitioning, if you delete a free space (by
> mistake), the installation crashes (message: "the installer has
> encountered a
Le 13.06.2021 00:35, Nikolay Velyurov a écrit :
Hi Christophe,
On Sat, Jun 12, 2021 at 10:03 PM wrote:
then aborts with a error message
What's in the error message?
unexpected error (The detail fits on one page..)
normal 120GB ext4 boot/
Did you mean /boot instead? Be sure you haven
Hello,
I am trying to install guix system 1.3 on a lenovo t400 (libreboot) and
I have a problem with the manual partition table during the
installation.
I want an encrypted /home on a separate sata drive and the rest on the /
partition (no encryption). But the installer fails when formatting an
Le samedi 17 avril 2021 à 16:16 +, Ekaitz Zarraga a écrit :
> Hi all,
> This was already merged the other day so you'll have access to the 0.19.1
> version of freecad if you `guix pull`.
>
> Best,
> Ekaitz
Hi Ekaitz,
Hello,
Thank you very much for including the latest version of freecad in
Le dimanche 11 avril 2021 à 22:27 +, Ekaitz Zarraga a écrit :
> Hi Christophe,
>
> Yes, I just sent a new version with the package to the thread.
> The problem was Luis Felipe was able to compile it, probably because
> his system wasn't as up-to-date as yours. (That's why it worked in my
> com
Le dimanche 11 avril 2021 à 16:45 +, Ekaitz Zarraga a écrit :
> Hi,
>
> You can try with the file attached.
>
> You just need to run the following, considering `freecad.scm` is the attached
> file, and that you are in the folder that contains the file.
> ```
> guix build -f freecad.scm
> ```
Le jeudi 08 avril 2021 à 13:05 +, Ekaitz Zarraga a écrit :
> Hi all,
> I had some free time and I decided to spend it on updating thefreecad
> package to the 0.19.1 version.
MANY THANKS
>
> I managed it to compile with the changes I add below, but I
> prefer someone to test it thoroughly beca
Le samedi 03 avril 2021 à 19:21 +, Ekaitz Zarraga a écrit :
>
>
> At the moment we have the 18.5 version of freecad available.
> Surprising or not, I was the guy who updated it to that version (and
> fixed the package because it wasn't even working) and I have bad news
> for you.
> Freeca
Le vendredi 02 avril 2021 à 10:43 -0400, Gary Johnson a écrit :
> Christophe Pisteur writes:
> > Unfortunately there is no git on flathub. There is only gitg, which
> > Iinstalled, but the problem remains with the freecad addons.
>
> That's unfortunate. So...maybe I mi
Le mercredi 31 mars 2021 à 10:29 -0400, Gary Johnson a écrit :
> Christophe Pisteur writes:
> > Thank you for the quick answer.I have git installed on my system
> > via guix package -i gitwhich is probably with ssl support?So I
> > think that the version of flatpak does no
Le mercredi 31 mars 2021 à 09:46 +, Ekaitz Zarraga a écrit :
> Hi there,
>
> On Wednesday, March 31, 2021 11:15 AM, Christophe Pisteur <
> christophe.pist...@fsfe.org> wrote:
> > Hello,
> > After having failed to install freecad from an Appimage on guix
> >
Hello,
After having failed to install freecad from an Appimage on guix system
(1), a new version of freecad (freecad 19.1) has just been realised and
proposed on flathub (2).
Unfortunately, the addon manager does not work with this version of
freecad on flathub on guix system. But it is in the ad
Le jeudi 11 février 2021 à 15:12 +0100, Sergiu Ivanov a écrit :
> Hi Christophe,
> > I don't understand all the nuances of this discussion (I'm sorry),
> > butit seems to me that the problem is, in the case of the
> > developmentversion of freecad, that the sources are not published
> > regularly.
Le jeudi 11 février 2021 à 05:25 +0100, raingloom a écrit :
> On Wed, 10 Feb 2021 19:59:17 +0100Tobias Geerinckx-Rice > wrote:
> > Instead, I strongly recommend writing your own Guix package (using
> > inherit) or looking for a less byzantine download format.
>
> For a quick test, could try build
Bonjour Tobias!
Le mercredi 10 février 2021 à 19:59 +0100, Tobias Geerinckx-Rice a
écrit :
> Bonjour Christophe!
>
> Instead, I strongly recommend writing your own Guix package (using
> inherit) or looking for a less byzantine download format.
Thank you for these detailed explanations.
I see i
Hello,
I would like to use the development version of freecad (currently
freecad 0.19), but only stable freecad (freecad 0.18) is in the guix
package.
The alternative solution is to use the freecad Appimage (1) as explain
here (2) but it doesn't work on my guix system.
Here are the error message
> Em 07/02/2021 15:59, Christophe Pisteur escreveu:>> I installed
Element (1) by flatpak, but applications installed by
> First question is: why is Flatpak being distributed by Guix without
any patch
> to conform to GNU FSDG?
> Perhaps this is another instance of bug #45
Hello,
Yes, the command works perfectly fine (with errors indicated by
terminal output) but I wish I could launch Element from the gnome menu.
Christophe
Le dimanche 07 février 2021 à 20:27 +0100, Léo Le Bouter a écrit :
> Hello!
>
> This issue happens to me as well but using that command you s
Hello,
I installed Element (1) by flatpak, but applications installed by
Flatpak do not appear on the gnome desktop applications menu (even
after reboot).
When I run Element through the terminal, I get the following message:
$ flatpak run im.riot.Rio
e -i
> transmission:gui`.
> On Sat, Jan 16, 2021, at 17:32, Christophe Pisteur wrote:
> > Hello,
> > I installed transmission in my profil ($ guix package -i
> > transmission)but cannot launch it. There is no icon in gnome menu;
> > and I tried to start transmission
Hello,
I installed transmission in my profil ($ guix package -i transmission)
but cannot launch it.
There is no icon in gnome menu; and I tried to start transmission with
the terminal ($ transmission or $ transmission-gtk) but nothing
happens.
I did: guix pull, guix package -u, sudo guix system r
h" "fr"))
(host-name "t400")
(users (cons* (user-account
(name "christophe")
(comment "Christophe Pisteur")
(group "users")
(home-directory "/home/christophe")
Le dimanche 03 janvier 2021 à 21:49 +0100, Tobias Geerinckx-Rice a
écrit :
> Hi Christophe,
>
> Christophe Pisteur 写道：
> > 1) after guix pull, I get the following message:
> >
> > export PATH="$HOME/.config/guix/current/bin:$PATH"
> > export
> >
Hello,
sorry for the newbie question.
1) after guix pull, I get the following message:
export PATH="$HOME/.config/guix/current/bin:$PATH"
export INFOPATH="$HOME/.config/guix/current/share/info:$INFOPATH"
I don't quite understand what to type in the terminal. Should I replace
$HOME or HOME with
Le samedi 16 mai 2020 à 15:27 +0200, Marius Bakke a écrit :
> Christophe Pisteur writes:
>
> > Le vendredi 15 mai 2020 à 17:33 +0200, Tobias Geerinckx-Rice a
> > écrit :
> > > Christophe,
> > >
> > > (...)
> > > (Guix) System softwa
Le vendredi 15 mai 2020 à 17:33 +0200, Tobias Geerinckx-Rice a écrit :
> Christophe,
>
> Christophe Pisteur 写道：
> > Since now, I installed the following packages: cups,
> > cups-filters,
> > fomatics-filters.
> > When I launch http: // localhost: 631 / in my br
Hello,
I don't understand how to configure a printer on Guix System.
I should configure the print service, as explain in the manual section
8.8.6, but I don't understand the procedure. I would probably need a
"how to".
Since now, I installed the following packages: cups, cups-filters,
fomatics-
Le 02.05.2020 23:06, sirgazil a écrit :
On Sun, 03 May 2020 03:32:33 + Leo Famulari
wrote
> Welcome and thanks for trying Guix!
:-) Guix is very exciting.
>
> On Sat, May 02, 2020 at 10:09:10PM +0200,
christophe.pist...@posteo.net wrote:
> > The only small problem is the sy
Hello, I installed guix system 1.1.0 on real hardware (Lenovo T400 with
libreboot, Intel P8600 @ 2.40GHz × 2) for a week.
The installation went very smoothly and all the hardware is correctly
detected. Guix system is very responsive (Gnome 3.32) on this old
computer, better than many of the di
44 matches
Mail list logo
