FYI: I just tested latest revision (2154) and there is no error message
about "multiple metadata areas". I suppose it was fixed (probably "by
accident" ;) ) in on of latest patches ("Partitions can start at zero" ?
just wild guess).
Anyway I only tested grub-probe on my current system (with 2 di
(hd1) /dev/sdb
(hd2) /dev/sdc <= USB stick
--
Everything works (I copied memtest86 from RescueCD to /boot and managed
to boot it).
= Single partion,
gt;
>> This error come from lvm, perhaps you can try raid10 first.
>>
>>
>
> I played a bit when I had free time and...
> - I learned to ignore grub error messages :D
> - RAID10 seems to work OK
> - LVM @ RAID10 @ single partition (on each disk) results in above
es :D
- RAID10 seems to work OK
- LVM @ RAID10 @ single partition (on each disk) results in above
error message but if I add small partition (so there are 2 partitions
per disk) there is no error. I tried with different number of LVs,
different LV names, anything.. could it be some error in
On Tue, Nov 25, 2008 at 9:08 AM, Wojciech Pyczak <[EMAIL PROTECTED]> wrote:
> Hello!
>
> I have some troubles setting up grub2 on my configuration. After I bought a
> new computer I decided to "go wild" and setup everything on top of LVM, with
> LVM itself on RAID array. I expected there will be so
Hello!
I have some troubles setting up grub2 on my configuration. After I
bought a new computer I decided to "go wild" and setup everything on top
of LVM, with LVM itself on RAID array. I expected there will be some
problems and here I am :)
Few words about configuration - I have 2x WD 640GB
