2009/9/19 Mick :
> On Saturday 19 September 2009, meino.cra...@gmx.de wrote:
>> > cleaner shutdown. This is taken from a email that was sent to me during
>> > that horrible xorg-server and hal upgrade.
>> >
>> > > Hold down Atl, hold down SysRq, press each of the keys in turn. The
>> > > usual ful
2009/9/19 :
>> Hi,
>> I got a similar problem too once... and what was making the system
>> hang wasn't the last shutting down thing listed, but the one just
>> after (so i don't think it's net.lo fault in your case). So i suggest
>> to have a look at which services are started at boot, but aren't
2009/9/21 :
> walt [09-09-21 19:36]:
>> On 09/20/2009 07:40 PM, meino.cra...@gmx.de wrote:
>> >walt [09-09-21 02:32]:
>> >>On 09/20/2009 09:15 AM, meino.cra...@gmx.de wrote:
>> >>
>> >>>solfire:/home/mccramer>l /etc/asound.state
>> >>>-rw-r--r-- 1 root root 10122 2009-08-06 18:05 /etc/asound.sta
Hi all,
I've got a weird trouble with Xorg...
At boot Xorg is loaded (it's in the default runlevel) but it does not
load the nvidia driver, but if I restart it from the command line
(without any change in the config) it works and loads the module
normally...
What could the trouble be? I have absolu
> any clues in /var/log/Xorg.0.log?
Yes! I've found this:
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
that is the only error reported...
But this suggests me nothing... I've looked at eselect and nvidia is
the opengl interface...
revdep-rebuild tells it's all ok.
> All you have to do in order to get the proprietery nvidia drv working
> is:
>
> 1) make sure the open src nvidia drv is not built in-kernel or as kernel
> module:
>
>
>Location:
> -> Device Drivers
>-> Graphics support
> -> Support for frame buffer devices (FB [
2008/1/31, Daniel Iliev <[EMAIL PROTECTED]>:
> On Wed, 30 Jan 2008 18:56:30 +0100
> Pupino <[EMAIL PROTECTED]> wrote:
>
> > > All you have to do in order to get the proprietery nvidia drv
> > > working is:
> > >
> > > 1) make sure the open
2008/1/31, Daniel Iliev <[EMAIL PROTECTED]>:
> On Thu, 31 Jan 2008 13:18:40 +0100
> Pupino <[EMAIL PROTECTED]> wrote:
>
> > 2008/1/31, Daniel Iliev <[EMAIL PROTECTED]>:
> > > On Wed, 30 Jan 2008 18:56:30 +0100
> > > Pupino <[EMAIL PROTECTED]&
2008/2/3, Mark Knecht <[EMAIL PROTECTED]>:
> With an eye toward sharing some directories on my Gentoo machines with
> either Windows machines across my network or just making ext3
> partitions available when I'm forced to dual boot and find I want
> something for my trip to the dark side I'm wonder
Hi all!
I'm trying to use acpid with my gentoo laptop; it catches all events
(battery, button, ac_adapter) but it can't execute the designed
script, in any case.
Here's the output of tail /var/log/messages
Feb 14 14:04:10 spaventapasseri acpid: received event "button/power
PWRF 0080 0004"
2008/2/14, Alex Schuster <[EMAIL PROTECTED]>:
> Pupino writes:
>
> > I'm trying to use acpid with my gentoo laptop; it catches all events
> > (battery, button, ac_adapter) but it can't execute the designed
> > script, in any case.
>
> [...]
>
&g
2008/2/17, Michael J. Barillier <[EMAIL PROTECTED]>:
> The touchpad on my Acer laptop has stopped working in X after a recent
> `emerge -uD world'. Looking through emerge.log doesn't indicate
> anything hardware-related. The touchpad shows up in dmesg:
>
> ,
> | Synaptics Touchpad, model: 1,
Hi,
have you tried running revdep-rebuild?
it should fix this problem... is in the gentoolkit package
HTH
Davide
2008/4/30 Gavin Seddon <[EMAIL PROTECTED]>:
> skype
> /opt/skype/skype: /usr/lib/gcc/i486-pc-linux-gnu/3.4.6/libstdc++.so.6:
> version `CXXABI_1.3.1' not found (required by /opt/skyp
Hi,
I have no clues about cross compiling and bootloaders other than grub
(ok, maybe lilo) but if you want to determine if that device is seen
as a storage device why don't you just plug it in and have a look at
dmesg?
when I plug a usb key on my machine i see something like this:
[ 1647.577443] us
Hello everybody,
i'm having troubles with the policykit package, and i've discovered
that the new version (0.92) has broken all APIs and this causes some
packages to not compile anymore (network manager in my case).
So i tried to mask it and keep the 0.9-r1 version instead, but with no result.
I've
2009/7/2 David :
> Dale wrote:
>>
>> Pupino wrote:
>>>
>>> Hello everybody,
>>> i'm having troubles with the policykit package, and i've discovered
>>> that the new version (0.92) has broken all APIs and this causes some
>>>
Hello everybody, i've made a system upgrade and networkmanager stopped
working (or at least i think that's the problem). I use wicd to
connect to my wireless ap and now it hangs on telling "validating
authentication". The packages involved in the upgrade that might be
responsible (imho) are: networ
2009/7/7 Neil Bothwick :
> On Tue, 7 Jul 2009 12:58:23 +0000, Pupino wrote:
>
>> Hello everybody, i've made a system upgrade and networkmanager stopped
>> working (or at least i think that's the problem). I use wicd to
>> connect to my wireless ap and n
Hi all,
i noticed a strange behaviour on my macine recently.
Something is continuously filling up my root partition at a speed near
1k per minute.
I have just few programs running and none of them should save that
much information on the disk.
Now the problem is that i have absolutely no idea of wh
2008/11/30 Dio, James <[EMAIL PROTECTED]>:
>> Hi all,
>> i noticed a strange behaviour on my macine recently.
>> Something is continuously filling up my root partition at a speed near
>> 1k per minute.
>> I have just few programs running and none of them should save that
>> much information on the
> So tomorrow i'll try to find out wich one is guilty and try find a
> remedy... (now it's 3 am, i'm a bit tired...)
> i'll post back.
>
> Thank you all for the quick help!
> Davide
>
I found that i had accidentally enable the full debugging output of my
wireless card in the kernel, so that was wh
2008/12/7 James Homuth <[EMAIL PROTECTED]>:
> Ran a pretend update on one of my boxes, and this was spit back:
> These are the packages that would be merged, in order:
>
>
>
> Calculating world dependencies /!!! Digest verification failed:
>
> !!! /usr/portage/net-firewall/iptables/iptables-1.4.0-r
2009/2/21 Helmut Jarausch :
> Hi,
>
> I have switched from a machine with Nvidia (proprietary) graphics driver
> to a machine with onboard radeonhd device.
>
> Now when reemerging xorg-server or trying to eselect opengl
> it always tries to find Nvidia's opengl.
>
> Of course, I have unmerged the n
2008/6/8 Matt Harrison <[EMAIL PROTECTED]>:
> deface wrote:
>
>> tried running a revdep-rebuild? please paste the output of emerge --info
>>
>
> revdep-rebuild doesn't find anything that needs rebuilding.
>
> emerge --info:
>
> Portage 2.1.4.4 (default/linux/amd64/2008.0, gcc-4.1.2, glibc-2.6.1-r0
Hi all,
I was trying to get MPX, (the multi pointer X
http://wearables.unisa.edu.au/mpx/ ) , working but I get no result.
Anyone knows if it's already in the latest xorg-x11 (7.3) or just in the git
of xorg?
And parhaps does anyone know a guide to install/configure it?
Thanks in advance to all.
D
2008/6/22 Norman Hakim <[EMAIL PROTECTED]>:
>
>
> *Ward Poelmans <[EMAIL PROTECTED]>* wrote:
>
> 2008/6/21 Norman Hakim :
>
> > Yes,i can the icon but i cannot open it,after i click it nothing happen.
> Is
> > it i have to Run "mount" and "dmesg" using terminal? i'm using Gnome
> desktop
> > manag
2008/6/22 William Kenworthy <[EMAIL PROTECTED]>:
> Since upgrading to firefox 3, FF has started behaving badly. If I click
> on a link in say evolution in one desktop, with FF open in another, FF
> will jump to the desktop where I clicked on the link. This is quite
> off-putting to suddenly have
Hi,
generally there's nothing wrong in downgrading packages and means that the
version you're using has been masked for some reason.
You should check if the version you currently have is masked for your
architecture. If yes emerge is ok and that's a normal behaviour.
You can check that here: http:/
Hi all,
i was used to intall alsa-lib and co. and use tools like alsamixer to
manage the audio on my gentoo; now i've tryied to switch to the
in-kernel way.
I've built the relevant part into the kernel, no module, but now i'm stuck.
If i try to emerge alsa-utils (wich has alsamixer) it pulls in als
2008/10/31 Nikos Chantziaras <[EMAIL PROTECTED]>:
> Joshua Murphy wrote:
>>
>> On Thu, Oct 30, 2008 at 7:46 PM, Markos Chandras <[EMAIL PROTECTED]>
>> wrote:
>>>
>>> From my experience i would recommend to use alsa-in-kernel + alsa-libs +
>>> alsa-headers + alsa-utils + alsa-tools
>>>
>>> This comb
2008/10/31 Neil Bothwick <[EMAIL PROTECTED]>:
> On Fri, 31 Oct 2008 12:05:47 +0100, Pupino wrote:
>
>> But i read this after building alsa-lib:
>> * Please try in-kernel ALSA drivers instead of the alsa-drivers ebuild.
>> * If alsa-drivers works for you where a r
31 matches
Mail list logo
