Hi list,
since I updated to some of new linux kernels versions, I started
to experimenting many problems with my usb devices / hub, which makes
my computer works in a very strange manner. Researching on this
direction on the web, I noticed that many people have the same/similar
problem as mine,
nyone offer any suggestions?
Thanks, Richard
--
Leandro Melo de Sales.
Computer Science MSc Candidate
Pervasive Computing Lab - embedded.ufcg.edu.br
Center of Electrical Engineering and Informatics at Federal University
of Campina Grande - UFCG / Brazil
083 33101404 (extension 208)
"O g
His arrogance is a desperation signal. He, in fact, knows and are
conscient of his mistake and because of a lack of justification to
give due to what he did, he act like this.
I suggest to ignore such users and do what Neil said: wait for this
user need to use the list for its write propose and
... for its **right** propose ...
2007/2/22, Leandro Melo de Sales <[EMAIL PROTECTED]>:
His arrogance is a desperation signal. He, in fact, knows and are
conscient of his mistake and because of a lack of justification to
give due to what he did, he act like this.
I suggest to ignor
Hi list,
I need to install python version 2.5, which in portage it is in hard
testing masked. If I install it anyway, is this mean problem to my
gentoo installation?
Leandro
--
gentoo-user@gentoo.org mailing list
Hi,
I tried to emerge the latest portage version and I got it:
# emerge -uvDN portage
Emerging (1 of 31) sys-apps/portage-2.1.2.7 to /
!!! A file listed in the Manifest could not be found:
/usr/portage/sys-apps/portage/portage-2.1.3_rc6.ebuild
--
[EMAIL PROTECTED] mailing list
Good! I'm in the Linux Symposium, tomorrow in the Gentoo BoF, I will
report that situation. I'm resync now...
2007/6/29, Randy Barlow <[EMAIL PROTECTED]>:
Leandro Melo de Sales wrote:
> I tried to emerge the latest portage version and I got it:
>
> # emerge -uvDN po
Hi list,
I'm configured a LDAP server to be used as a users database. Now, I
want to setup linux box clients to auth against LDAP server. I
installed ldap-pam and ldap-nss. In /etc/ldap.conf file I have to
inform rootdn password. What is the best way to do this since the
configuration file has t
Hi,
I configured my clients to auth against a LDAP server. Everything
works fine, but sometime nss_ldap disconnect and I can't connect
anymore. What it is happening? When this occurs I can't connect/auth
through ssh server, after type password I got a "connection reset by
remote peer" message.
Hi list, How to discover what is the package of a given file? Should I use emerge command?Leandro
Hi, I'm trying to update openldap and one of package dependency is cyrus-sasl, but when emerge compile cyrus-sasl package, it shows the following message:# emerge cyrus-saslCalculating dependencies... done!
>>> Emerging (1 of 1) dev-libs/cyrus-sasl-2.1.22 to / * cyrus-sasl-2.1.22.tar.gz MD5 ;-) ..
Thank you Vikas and Justin. It works for me.
Leandro
26 Oct 2006 03:44:29 +0530, Vikas Kumar <[EMAIL PROTECTED]>:
On 18:58 Wed 25 Oct , Leandro Melo de Sales wrote:
>Hi list,
>
> How to discover what is the package of a given file? Should I use emerge
>comma
Please, for those one that has this same problem go to:
http://bugs.gentoo.org/show_bug.cgi?id=152544
http://bugs.gentoo.org/show_bug.cgi?id=152665
Leandro.
2006/10/25, Jamie <[EMAIL PROTECTED]>:
Best guess it that one of the files is currupted or has an update. Try and
emerge --sync then try
Hi
my nscd daemon dies periodically and I don't know what is happening...
any suggestion? (nss_ldap: failed to bind to LDAP server
ldap://127.0.0.1: Can't contact LDAP server)
[]s
Leandro.
--
gentoo-user@gentoo.org mailing list
ebuild.sh, line 1568: Called dyn_compile
ebuild.sh, line 937: Called src_compile
cyrus-sasl-2.1.22.ebuild, line 166: Called die
Any hints?
--
gentoo-user@gentoo.org mailing list
--
Leandro Melo de Sales.
Computer Science MSc Candidate
Distributed System Lab - lsd.ufcg.edu.br
Pe
Sorry for my answer in portuguese. It is a private message to Felipe.
[]s
Leandro.
2006/10/26, Leandro Melo de Sales <[EMAIL PROTECTED]>:
Felipe,
Eu mandei uma resposta ontem comentando o seu problema. Caso ainda
não tenha resolvido leia os seguintes
Hi.
In order to document this problem, I solve it installing
media-plugins/gst-plugins-alsa package. Thanks anyway.
[]s
Leandro
2006/10/30, Leandro Melo de Sales <[EMAIL PROTECTED]>:
Hi list...
I configured alsa system and it detected my sound card. Alsamixer
can control the vol
Hi list...
I have an usb sound system from Gradiente company (an eletronic
device factory) and I plugged it on my system. dmesg command shows
this:
input: Gradiente AS-M5X0 as /class/input/input3
input: USB HID v1.00 Device [Gradiente AS-M5X0] on usb-:00:1d.1-1
But when I play a m
ice is /dev/sound/dsp1 or something like
that?
I tried to do what you said on Amarok, but the "Alsa Device
Configuration" section is disabled, why?
[]s
Leandro.
2006/10/31, Richard Fish <[EMAIL PROTECTED]>:
On 10/30/06, Leandro Melo de Sales <[EMAIL PROTECTED]> wrote:
>
23 -a /dev/sound/dsp1 music.mp3
... the file is played on my usb device perfectly!!! So, this is the
proof that kernel recognize the device and I just don't know how
switch alsa default device do /dev/sound/dsp1.
Any clue? Thank you,
Leandro.
2006/10/31, Leandro Melo de Sales <[EMAIL PROTE
slot-0 snd-usb-audio
alias snd-card-1 snd-intel8x0
alias sound-slot-1 snd-intel8x0
options snd-usb-audio index=0
options snd-intel8x0 index=1
... snd-intel8x0 is the module alias for my internal sound card and
snd-usb-audio for my external usb audio device.
BT
Hi,
I installed cups and my printer is recognized by the kernel
(usblp.ko module), but when I try to add a new printer, cups doesn't
show usb option, why? How to solve this?
Thanks,
Leandro.
--
gentoo-user@gentoo.org mailing list
Printer sharing)
+ + slp : Adds Service Locator Protocol support
+ + ssl : Adds support for Secure Socket Layer connections
+ + tiff : Adds support for the tiff image format
... any other clue?
Leandro.
2006/10/31, Arnau Bria <[EMAIL PROTECTED]>:
On Tue, 31 Oct 2006 10:00:23 -0300
Leandr
alled dyn_compile
ebuild.sh, line 937: Called src_compile
qt-3.3.6-r4.ebuild, line 201: Called die
Any clue?
--
Leandro Melo de Sales.
Computer Science MSc Candidate
Distributed System Lab - lsd.ufcg.edu.br
Pervasive Computing Lab - embedded.ufcg.edu.br
Federal University of Campina Grande -
OK. I tried to reemerge the packages you suggested but I got other error:
Emerging (1 of 2) x11-libs/libXrandr-1.1.1 to /
* libXrandr-1.1.1.tar.bz2 MD5 ;-) ...[ ok ]
* libXrandr-1.1.1.tar.bz2 RMD160 ;-) ... [ ok ]
* libXrandr-1
Hi,
I have firefox 1.5 and macromedia flash plugin, but flash animation
with sound, the sound is not played, any clue?
Thank you,
Leandro.
--
gentoo-user@gentoo.org mailing list
Hi,
my system is configured to have a ldap based authentication. I put
"bind_policy soft" on /etc/ldap.conf file, so I need nscd running, but
after about 5 seconds that I start nscd, it dies. Why? I check log
files but I can't see any additional information. I prefer to use
"bind_policy hard", b
Hi,
I'm trying to compile GCC 4.1.1-r1 but I got the following error message:
In file included from
/var/tmp/portage/gcc-4.1.1-r1/work/gcc-4.1.1/gcc/gcc.c:134:
./configargs.h:2: warning: string length '801' is greater than the
length '509' ISO C89 compilers are required to support
/var/tmp/porta
Thank you, I'll read it.
[]s
Leandro
2006/11/23, Etaoin Shrdlu <[EMAIL PROTECTED]>:
On Thursday 23 November 2006 14:39, Leandro Melo de Sales wrote:
> Hi,
>
> I'm trying to compile GCC 4.1.1-r1 but I got the following error
> message:
>[cut]
> 'main&#
Hi,
# date
Tue Dec 5 10:12:01 BRT 2006
# emerge openoffice
{ in other terminal }
# date
Tue Dec 5 15:24:01 BRT 2006
and portage continues to compile openoffice, it didn't finished yet.
Is it so slow or there are something wrong? My machine is a P4 (with
HyperThreading enabled), 512Mb.
T
OK. The problem is that I typed "emerge openoffice" in a xterm. Is it
possible to turn X off and continue compilation on console?
Leandro
2006/12/5, Richard Fish <[EMAIL PROTECTED]>:
On 12/5/06, Daniel da Veiga <[EMAIL PROTECTED]> wrote:
> On 12/5/06, Leandro Melo d
Ok... thanks Michael and Neil, I didn't know that compiling openoffice
take to many times. For next big emerges I'll do what you suggested.
Leandro
2006/12/5, Michael Sullivan <[EMAIL PROTECTED]>:
On Tue, 2006-12-05 at 16:46 -0300, Leandro Melo de Sales wrote:
> OK. The prob
Can you please tell me the propose of screen?
Thank you,
Leandro
2006/12/5, Neil Bothwick <[EMAIL PROTECTED]>:
On Tue, 05 Dec 2006 22:35:55 +, b.n. wrote:
> Why is using screen so recommended? I never used it, but I'd like to
> know about.
It's just so useful, give it a try.
There are t
gentoo-user@gentoo.org mailing list
--
Leandro Melo de Sales.
Computer Science MSc Candidate
Pervasive Computing Lab - embedded.ufcg.edu.br
Federal University of Campina Grande - UFCG / Brazil
083 33101404 (extension 208)
"O guerreiro é forte em lealdade, intensidade, determinação,
iniciati
Good explanation Alan, thanks! :)
2006/12/6, Alan McKinnon <[EMAIL PROTECTED]>:
On Wednesday 06 December 2006 00:03, Leandro Melo de Sales wrote:
> Can you please tell me the propose of screen?
>
> Thank you,
>
> Leandro
screen does many functions, but the most useful is p
Hi list,
# ifconfig eth0:0 192.168.1.3
SIOCSIFADDR: File exists
SIOCSIFFLAGS: Cannot assign requested address
My /etc/conf.d/net is correct:
config_eth0=( "192.168.1.2 netmask 255.255.255.0"
"192.168.1.3 netmask 255.255.255.0"
"192.168.1.6 netmask 255.255.255.0"
)
rout
Hi Jerry, but the fact is that eth0 (the first ip, 192.168.1.2) is up...
Any other clue?
Leandro
2006/12/11, Jerry McBride <[EMAIL PROTECTED]>:
On Monday 11 December 2006 12:34, Leandro Melo de Sales wrote:
> Hi list,
>
> # ifconfig eth0:0 192.168.1.3
> SIOCSI
ign more than one ip for a net
interface.
Thanks for all replies.
Leandro
2006/12/11, Mike Williams <[EMAIL PROTECTED]>:
On Monday 11 December 2006 17:34, Leandro Melo de Sales wrote:
> # ifconfig eth0:0 192.168.1.3
> SIOCSIFADDR: File exists
> SIOCSIFFLAGS: Cannot assign reques
255.255.255.0.
>
> > routes_eth0=("default via 192.168.254.254")
> > dns_servers_eth0=("192.168.254.254")
>
> Uwe
>
> --
> Mark Twain: I rather decline two drinks than a German adjective.
> http://www.SysEx.com.na
> --
> gentoo-user@gen
Hi list,
I have PHP 5 installed and now I want to enable a new option for
this package (xsl option of /etc/portage/package.use), but when I type
emerge php emerge tell me that dev-db/mysql is blocking
mysql-community. It seems that emerge wants to install mysql5 (I have
mysql 4.0 installed and
se) (-sybase-ct) -sysvipc -threads -tidy -tokenizer
-vm-goto -vm-switch -wddx -xmlrpc -xmlwriter -xpm -yaz" 25 kB
2007/1/25, Leandro Melo de Sales <[EMAIL PROTECTED]>:
Hi list,
I have PHP 5 installed and now I want to enable a new option for
this package (xsl option of /etc/portag
Hi folks,
Recently I installed mysql using emerge mysql, but the version that
was installed is 4.1.14, but I'd like to install the last available
version of the 4.0 release. How can I do this?
Thank you,
--
Leandro Melo de Sales.
Undergraduate Computer Science Student
NExOS Lab
Thank you Ciaran. I'm installing the 4.0.25 version now.
Bye,
Leandro
2005/12/3, Ciaran McCreesh <[EMAIL PROTECTED]>:
> On Sat, 3 Dec 2005 15:04:58 -0300 Leandro Melo de Sales
> <[EMAIL PROTECTED]> wrote:
> | Recently I installed mysql using emerge mysql, bu
Thank you Rudmer too! :D
Leandro.
2005/12/3, Rudmer van Dijk <[EMAIL PROTECTED]>:
> On Saturday 03 December 2005 19:04, Leandro Melo de Sales wrote:
> > Recently I installed mysql using emerge mysql, but the version that
> > was installed is 4.1.14, but I'd like to
Hi folks,
I'm trying to make a world update, but I got the following:
# emerge -uD world
Calculating world dependencies ...done!
!!! Error: the =kde-base/kcheckpass-3.4* package conflicts with another package.
!!!both can't be installed on the same system together.
!!!Please use
Thank you Holly, I understood your explanation. I'm now installing the
4.0.25 version.
Leandro.
2005/12/3, Holly Bostick <[EMAIL PROTECTED]>:
> Leandro Melo de Sales schreef:
> > Hi folks,
> >
> > Recently I installed mysql using emerge mysql, but the version
I read in a faq that due to its journally feature it is not possible
to recover file, even if the file is a plain text one. Is this right?
If not, what do I have to do in order to recover a file that I
accidentally deleted?
Thank you,
Leandro
--
gentoo-user@gentoo.org mailing list
Hi guys,
grep -a -B10 -A10 "SOME STRING" /dev/hda? > /tmp/recover.txt
This was enough for me. Bye
Leandro
2005/12/4, Leandro Melo de Sales <[EMAIL PROTECTED]>:
> I read in a faq that due to its journally feature it is not possible
> to recover file, even if the fil
Hi,
I'm trying to configure my bnep0 as shown in
http://www.gentoo.org/doc/en/bluetooth-guide.xml. Well, I'm doing like
this:
# modprobe bnep
# lsmod
Module Size Used by
bnep 12928 2
but when I try to setup the ip address for the bnep0 I got the following e
;pand --listen..." line in the howto ? Did you forget it ?
> If that is not the problem, please submit your question to the bluez mailling
> list.
>
> David.
>
> Le vendredi 09 Décembre 2005 15:39, Leandro Melo de Sales a écrit :
> > Hi,
> >
> > I'm trying to
Hi all,
I'd like to know a good document that shows a good/secure way to
configure OpenLDAP. Addionally documentation about integrade Samba
with OpenLDAP as well as PAM with OpenLDAP.
Thank you,
Leandro.
--
gentoo-user@gentoo.org mailing list
gt; >
> > Start a new thread with a topic like "OT: LDAP Filters" and I can try
> > to give you some direction.
> >
> > Jim
> > --
> > gentoo-user@gentoo.org mailing list
> >
> >
>
> --
> gentoo-user@gentoo.org mailing list
>
27;ll get started on it.
>
> 2006/3/30, Raphael Melo de Oliveira Bastos Sales <[EMAIL PROTECTED]>:
> > I'll tell you what, I'm kind of busy right now. But, when I have more
> > time on my hands, I'll post a full HOWTO on the Gentoo Wiki. What do
> > you
Hi folks,
After download gentoo-universal for AMD64, what is the right steps should I need to do to install gentoo on a Opteron AMD64 with adaptec SCSI controler?
Thanks
Leandro
And... what about grub configuration, what is the additional parameters?
Leandro.
2006/5/20, Leandro Melo de Sales <[EMAIL PROTECTED]>:
Hi folks,
After download gentoo-universal for AMD64, what is the right steps should I need to do to install gentoo on a Opteron AMD64 with adapte
Hi...
After configure the grub.conf and restart the system shown the
following message:
Block device /dev/sdb2 is not a valid root device... the root block
device is unspecified or not detected.
What I'm doing wrong?
Leandro
2006/5/20, Leandro Melo de Sales <[EMAIL PROTECTED]&
Hi folks,
Due to firewall configuration I can't make a emerge --sync using
rsync, is it possible to do it using ftp or http?
Thanks,
Leandro
--
gentoo-user@gentoo.org mailing list
And... what about grub configuration, what is the additional parameters?
Leandro.
2006/5/20, Leandro Melo de Sales <[EMAIL PROTECTED]>:
Hi folks,
After download gentoo-universal for AMD64, what is the right steps should I
need to do to install gentoo on a Opteron AMD64 with adapte
Hi folks,
After download gentoo-universal for AMD64, what is the right steps
should I need to do to install gentoo on a Opteron AMD64 with adaptec
SCSI controler?
Thanks
Leandro
--
gentoo-user@gentoo.org mailing list
nn, Volker Armin <[EMAIL PROTECTED]>:
On Sunday 21 May 2006 00:56, Leandro Melo de Sales wrote:
> Hi folks,
>
> After download gentoo-universal for AMD64, what is the right steps
> should I need to do to install gentoo on a Opteron AMD64 with adaptec
> SCSI controler?
Hi Ryan,
The / partition is ext3. The ufs message is just a warning. I don't
need UFS support. Any other clue?
Leandro.
2006/5/21, Ryan Tandy <[EMAIL PROTECTED]>:
Leandro Melo de Sales wrote:
> ramdisk compressed image found at block
> ufs: was compiled with read-only
other clue?
Thanks,
Leandro.
2006/5/21, Hemmann, Volker Armin <[EMAIL PROTECTED]>:
On Sunday 21 May 2006 04:31, Leandro Melo de Sales wrote:
> Ok... now I'm stuck here:
>
> ramdisk compressed image found at block
> ufs: was compiled with read-only support, can't b
,
Leandro.
2006/5/21, Hemmann, Volker Armin <[EMAIL PROTECTED]>:
On Sunday 21 May 2006 19:01, Leandro Melo de Sales wrote:
> Hi Hemmann,
>
>well, I don't have a good reason to use initrd, but this is an
> attempt to try putting gentoo running on my server. I'll kick out
Ok.. I put it. And yes, scsi drivers is in the kernel. Any other clue?
[]s
Leandro.
2006/5/21, Hemmann, Volker Armin <[EMAIL PROTECTED]>:
On Sunday 21 May 2006 20:19, Leandro Melo de Sales wrote:
> Hi Hemmann,
>
> thanks to answer. I re-check /etc/fstab and everything seems
Yes... for both.
2006/5/21, Hemmann, Volker Armin <[EMAIL PROTECTED]>:
On Sunday 21 May 2006 21:39, Leandro Melo de Sales wrote:
> Ok.. I put it. And yes, scsi drivers is in the kernel. Any other clue?
with drivers you mean the drivers for the card and the scsi disk driver?
--
ge
Exactly... AACRAID one.
2006/5/21, Hemmann, Volker Armin <[EMAIL PROTECTED]>:
On Sunday 21 May 2006 22:20, Leandro Melo de Sales wrote:
> Yes... for both.
which driver? the aacraid one?
--
gentoo-user@gentoo.org mailing list
--
Leandro Melo de Sales.
Computer Science Student
La
Yes.. when I boot using livecd I can mount the partitions correct. I
really don't know what is happened... :(
[]s
Leandro
2006/5/21, Hemmann, Volker Armin <[EMAIL PROTECTED]>:
On Sunday 21 May 2006 23:01, Leandro Melo de Sales wrote:
> Exactly... AACRAID one.
hm, and the driv
andro.
2006/5/21, Hemmann, Volker Armin <[EMAIL PROTECTED]>:
On Sunday 21 May 2006 23:50, Leandro Melo de Sales wrote:
> Yes.. when I boot using livecd I can mount the partitions correct. I
> really don't know what is happened... :(
and the livecd uses tha aacraid driver too?
is
Hi,
I installed gentoo on a AMD64 Opteron dual. When I use livecd the
kernel detects 2 cpu's, but when I boot using the installed system (I
use genkernel), the system detects just 1 cpu. What should I need to
do?
Leandro
--
gentoo-user@gentoo.org mailing list
Hi,
I want to install an previous version of a package. I need to mask
it at /etc/portage/package.mask, but how can I know the available
gentoo packages in order to mask the right one?
Thanks
Leandro
--
gentoo-user@gentoo.org mailing list
Ok. The package in question is mysql. I what to install version 3, but
I masked the oldest 4.0 and emerge search returns mysql version 5. How
can I install version 3?
Thanks,
Leandro
2006/5/22, Gian Domeni Calgeer <[EMAIL PROTECTED]>:
Am Montag 22 Mai 2006 20.53 schrieb Leandro Melo de
Hi list,
I'm tired with my problem and I hope someone can help... the problem is:
I have my / partition on /dev/sda1, including /boot. But 2 days ago
when I did the gentoo instalation I put it on a wrong disk. /
partition must be /dev/sdb2, that is connected to a SCSI controler
different than
: Silicon Image, Inc. SiI 3114
[SATALink/SATARaid] Serial ATA Controller (rev 02)
03:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
03:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
100] (rev 10)
2006/5/24, Leandro Melo de Sales <[EMAIL PROTECTED]>:
H
Hi...
I made a gentoo installation by reading gentoo installation guide.
When I boot from livecd the configuration of my disks is as follows:
BUS=scsi
/dev/sda -> SYSFS{model}=="SAMSUNG SP..."
BUS=scsi
/dev/sdb -> SYSFS{model}=="SysOp "
BUS=scsi
/dev/sdc -> SYSFS{m
Richard,
when I change any rules, should I have to execute a command in order
to update the udev rules?
Thank you,
Leandro.
2006/5/30, Richard Fish <[EMAIL PROTECTED]>:
On 5/29/06, Leandro Melo de Sales <[EMAIL PROTECTED]> wrote:
> BUS=="scsi", SYSFS{model}=="
Leandro.
2006/5/30, Richard Fish <[EMAIL PROTECTED]>:
On 5/29/06, Leandro Melo de Sales <[EMAIL PROTECTED]> wrote:
> BUS=="scsi", SYSFS{model}=="SAMSUNG SP123245", NAME="/dev/sda"
> BUS=="scsi", SYSFS{model}=="SysOp ", NA
I updated some programs and after this, everytime I go to a terminal,
type my username I got the following messages:
configuration error - unknown item 'FAILLOG_ENAB' (notify administrator)
configuration error - unknown item 'LASTLOG_ENAB' (notify administrator)
configuration error - unknown item
Thank u Christian!
2006/5/31, Christian Limberg <[EMAIL PROTECTED]>:
Leandro Melo de Sales schrieb:
> I updated some programs and after this, everytime I go to a terminal,
> type my username I got the following messages:
>
> configuration error - unknown item
Hi,
I set DNSDOMAIN variable to my domain in /etc/conf.d/domainname
file, but see it:
embedded etc # domainname
(none)
Am I doing something wrong? Or missing something?
--
Leandro Melo de Sales.
Computer Science Student
Laboratório de Sistemas Distribuídos - www.lsd.ufcg.edu.br
Laboratório
embedded ~ # /etc/init.d/domainname status
* Caching service dependencies ... [ ok ]
* status: started
embedded ~ # domainname
(none)
2006/5/31, Teresa and Dale <[EMAIL PROTECTED]>:
Leandro Melo de Sales wrote:
> Hi,
>
> I set DNSDOMAIN
Hi,
I'd like to know a good well-used tool to manage the system logs,
such as /var/log/* (such as apache, messages, mail, deamons, ssh,
...), /var/run/utmp, /var/log/wtmp and so on...
Thank you,
Leandro
--
gentoo-user@gentoo.org mailing list
Yes... thank you. The content of my resolv.conf is similar to yours.
[]s,
Leandro
2006/5/31, Nicolas MASSÉ <[EMAIL PROTECTED]>:
On Wednesday 31 May 2006 22:13, Leandro Melo de Sales wrote:
> embedded ~ # /etc/init.d/domainname status
> * Caching service
Hi Ryan,
thank you! You're right!
2006/5/31, Ryan Tandy <[EMAIL PROTECTED]>:
Leandro Melo de Sales wrote:
> Hi,
>
> I set DNSDOMAIN variable to my domain in /etc/conf.d/domainname
> file, but see it:
>
> embedded etc # domainname
> (none)
>
> Am I doing
How can I control the idle time? I don't want ssh disconnection even
if the user is idle.
Read from remote host x.y.w.z: Connection reset by peer
Thank u,
Leandro
--
gentoo-user@gentoo.org mailing list
Hi,
I'm trying to install Libwww but I got erros, please, see:
/bin/sh ../../libtool --mode=link x86_64-pc-linux-gnu-gcc
-march=athlon64 -O2 -pipe -Wall -o head head.o ../src/libwwwinit.la
../src/libwwwapp.la ../../Library/src/libwwwxml.la
../../modules/expat/xmlparse/libxmlparse.la
../.
is not existed" .
Thanks.
Bob Bao
[EMAIL PROTECTED]
--
Leandro Melo de Sales.
Computer Science Student
Laboratório de Sistemas Distribuídos - www.lsd.ufcg.edu.br
Laboratório de Sistemas Embarcados e Computação Pervasiva -
www.embeddedacademy.org
Universidade Federal de Campina Grande - UF
Hi,
How can I set the proper ls configuration to show ls output colored?
I type dircolors -b /etc/DIR_COLORS and after this?
Leandro
--
gentoo-user@gentoo.org mailing list
Hi,
I setup cvsd as shown in http://gentoo-wiki.com/HOWTO_CVS_Server.
When I test if I connect locally, in the shell everything works fine,
as it is shown in /var/log/message:
Jun 3 16:31:24 embedded cvsd[13679]: connection from 127.0.0.1 43619
Jun 3 16:31:24 embedded cvsd[13679]: cvs comman
Hi,
I can't find /var/log/daemon... Every time a service is stopped or
started I want to log it on /dev/log/daemon. In addition, I can't see
it on /var/log/message. I tried to stop apache for instance and the
system didn't log this event in /var/log/message, why?
Leandro.
--
gentoo-user@gentoo
The filesystem doesn't have this directory... any clue?
2006/6/3, Teresa and Dale <[EMAIL PROTECTED]>:
Leandro Melo de Sales wrote:
> Hi,
>
> I can't find /var/log/daemon... Every time a service is stopped or
> started I want to log it on /dev/log/daemon. In a
I'm using syslog-ng
2006/6/3, Daniel da Veiga <[EMAIL PROTECTED]>:
On 6/3/06, Leandro Melo de Sales <[EMAIL PROTECTED]> wrote:
> Hi,
>
>I can't find /var/log/daemon... Every time a service is stopped or
Well, I don't know what logger uses this dir, b
ot;/dev/tty12"); };
log { source(src); filter(f_daemon); destination(daemon); };
log { source(src); destination(messages); };
log { source(src); destination(console_all); };
What is wrong?
2006/6/4, Mick <[EMAIL PROTECTED]>:
On 03/06/06, Leandro Melo de Sales <[EMAIL PROTECTED]> wrot
Hi
I'm trying to compile dev-perl/Geo-IP and I got the following message:
Source unpacked.
* Using ExtUtils::MakeMaker
Checking if your kit is complete...
Looks good
Unrecognized argument in LIBS ignored: ''-L/usr/lib64''
Writing Makefile for Geo::IP
cp lib/Geo/Mirror.pm blib/lib/Geo/Mirror.pm
2006/6/4, Jeremy Olexa <[EMAIL PROTECTED]>:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Leandro Melo de Sales wrote:
> Hi Mark.. I made the proper changes and still not working.. :(
>
> # vi /etc/syslog-ng/syslog-ng.conf
> options {
>chain_hostnames(
Hi,
today when I was checking the server log I got many external
attempts to connect to my sshd service:
...
Jun 5 05:09:45 embedded sshd[4740]: Invalid user barbara from x.y.w.z
Jun 5 05:09:46 embedded sshd[4742]: Invalid user barb from x.y.w.z
Jun 5 05:09:48 embedded sshd[4744]: Invalid u
others will see ssh port
as closed.
--
#Joseph
On Mon, 2006-06-05 at 12:06 -0300, Leandro Melo de Sales wrote:
> Hi,
>
>today when I was checking the server log I got many external
> attempts to connect to my sshd service:
>
> ...
> Jun 5 05:09:45 embedded sshd[4740]
2006/6/5, Leandro Melo de Sales <[EMAIL PROTECTED]>:
Yes, but how can I do it?
2006/6/5, Joseph <[EMAIL PROTECTED]>:
> Try port knocking. It is very effective.
> Your ssh port will be closed until you successfully hit certain number
> of ports and even though the ssh port
How can I recompiler openssh to support tcpwrapper? I can't find
/etc/hosts.allow neither /etc/hosts.deny. Is there something missing?
Is there a way to put tcpwrapper as a turned on option for all
programs that supports it?
Specifically for openssh I edit /etc/portage/package.use file and put:
Still not working... :( and now?
2006/6/5, Mick <[EMAIL PROTECTED]>:
On 04/06/06, Leandro Melo de Sales <[EMAIL PROTECTED]> wrote:
> Yes, I restart syslog-ng... any clue?
Also restart the daemon you want to monitor.
--
Regards,
Mick
--
gentoo-user@gentoo.org mailing list
2006/6/5, Jeremy Olexa <[EMAIL PROTECTED]>:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Leandro Melo de Sales wrote:
> How can I recompiler openssh to support tcpwrapper? I can't find
> /etc/hosts.allow neither /etc/hosts.deny. Is there something missing?
> Is there a way
1 - 100 of 123 matches
Mail list logo
