-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 12.03.2015 19:52, Stefan G. Weichinger wrote:
> On 12.03.2015 18:28, Neil Bothwick wrote:
>> On Thu, 12 Mar 2015 18:12:06 +0100, Stefan G. Weichinger wrote:
>
c) Create a 4 disk RAID1 array consisting of sda2 and 3
missing disks. Then
On Fri, 13 Mar 2015 09:38:15 +0100, Stefan G. Weichinger wrote:
> c) Create a 4 disk RAID1 array consisting of sda2 and 3
> missing disks. Then add sdb2, sdc2, sdd2 in turn and the
> contents of sda2 will be replicated to them.
Question is in the subject line. Another question I have is there any point to
use other frambuffer device ( I currently use efifb) and I am thinking to use
fb for my radeon r4 graphics in hopes to get some acceleration. Thanks
--
German
On Thursday 12 March 2015 19:38:56 Dale wrote:
> I build everything into the kernel and I don't even install
> lm_sensors. I haven't installed that in ages.
Does that mean that your gkrellm can't display temperatures?
--
Rgds
Peter.
On Fri, 13 Mar 2015 05:08:16 -0400, German wrote:
> Question is in the subject line.
And the answer is in your hands? Does not being a member of the portage
group cause any problems for you? If not, you have no need of it.
--
Neil Bothwick
Quantum leap: (adj.) literally, to move by the smalle
On Fri, Mar 13, 2015 at 05:08:16AM -0400, German wrote
> Question is in the subject line.
If the user is a member of portage he can do any emerge operation as
long as the command includes "--pretend" or "-p"
[d531][waltdnes][~] emerge -pv ufraw
These are the packages that would be merged,
On Fri, 13 Mar 2015 06:42:08 -0400
"Walter Dnes" wrote:
> On Fri, Mar 13, 2015 at 05:08:16AM -0400, German wrote
> > Question is in the subject line.
>
> If the user is a member of portage he can do any emerge operation as
> long as the command includes "--pretend" or "-p"
>
> [d531][waltdnes
Mick wrote:
>
>
>
> I don't have the same MoBo and have compiled my corresponding chipset
sensor
> driver as a module. It doesn't load unless I manually modprobe it or
set it
> up in /etc/conf.d/modules. This is how many readings I get:
>
> $ sensors
> radeon-pci-0008
> Adapter: PCI adapter
> tem
Peter Humphrey wrote:
> On Thursday 12 March 2015 19:38:56 Dale wrote:
>
>> I build everything into the kernel and I don't even install
>> lm_sensors. I haven't installed that in ages.
> Does that mean that your gkrellm can't display temperatures?
>
It's been displaying temps for many years. I po
Tuomo Hartikainen wrote:
> On 150312 1835, Dale wrote:
>> waben...@gmail.com wrote:
>>> Something similar happened to me. I accidentally pressed F6 while
>>> focused gkrellm but didn't noticed it. Some time later I realized that
>>> the fontsize of gkrellm was increased so that it's height doesn't
On Friday 13 March 2015 06:27:00 Dale wrote:
> Peter Humphrey wrote:
> > On Thursday 12 March 2015 19:38:56 Dale wrote:
> >> I build everything into the kernel and I don't even install
> >> lm_sensors. I haven't installed that in ages.
> >
> > Does that mean that your gkrellm can't display tempera
On 13/03/15 12:42, Walter Dnes wrote:
On Fri, Mar 13, 2015 at 05:08:16AM -0400, German wrote
Question is in the subject line.
If the user is a member of portage he can do any emerge operation as
long as the command includes "--pretend" or "-p"
Actually, users in the portage group can "eme
On Fri, 13 Mar 2015 06:42:08 -0400, Walter Dnes wrote:
> If the user is a member of portage he can do any emerge operation as
> long as the command includes "--pretend" or "-p"
You don't need to be a member of the portage group to do that.
[fred@shooty ~ 0]% groups
users
[fred@shooty ~ 0]% eme
Am 2015-03-13 um 09:59 schrieb Neil Bothwick:
> See above. The reason for using a RAID1 array is to avoid having
> to update multiple disks, just mount /boot on the RAID device.
>
> % mount | grep boot /dev/md0 on /boot type ext2
> (rw,noatime,stripe=4)
/boot is my vfat ESP here .. no ext2 ...
On Fri, 13 Mar 2015 14:55:27 +0100, Stefan G. Weichinger wrote:
> > See above. The reason for using a RAID1 array is to avoid having
> > to update multiple disks, just mount /boot on the RAID device.
> >
> > % mount | grep boot /dev/md0 on /boot type ext2
> > (rw,noatime,stripe=4)
>
> /boot is
This is very strange. When I boot up my box and login as a user I can use
screen. But if I booted up and logged in as root first and then su user, the
user have the error message displayed in the subject line. Any ideas?
--
German
Peter Humphrey wrote:
> On Friday 13 March 2015 06:27:00 Dale wrote:
>> Peter Humphrey wrote:
>>> On Thursday 12 March 2015 19:38:56 Dale wrote:
I build everything into the kernel and I don't even install
lm_sensors. I haven't installed that in ages.
>>> Does that mean that your gkrellm c
On 13 March 2015 15:52:41 GMT+00:00, German wrote:
> This is very strange. When I boot up my box and login as a user I can
> use screen. But if I booted up and logged in as root first and then su
> user, the user have the error message displayed in the subject line.
> Any ideas?
>
> --
> German
On Fri, 13 Mar 2015 15:59:04 +
Neil Bothwick wrote:
> On 13 March 2015 15:52:41 GMT+00:00, German wrote:
> > This is very strange. When I boot up my box and login as a user I can
> > use screen. But if I booted up and logged in as root first and then su
> > user, the user have the error mess
On Fri, Mar 13, 2015 at 10:06 AM, German wrote:
>
> On Fri, 13 Mar 2015 15:59:04 +
> Neil Bothwick wrote:
>
> > On 13 March 2015 15:52:41 GMT+00:00, German
wrote:
> > > This is very strange. When I boot up my box and login as a user I can
> > > use screen. But if I booted up and logged in as
On Friday 13 Mar 2015 15:49:38 Dale wrote:
> Peter Humphrey wrote:
> > On Friday 13 March 2015 06:27:00 Dale wrote:
> >> Peter Humphrey wrote:
> >>> On Thursday 12 March 2015 19:38:56 Dale wrote:
> I build everything into the kernel and I don't even install
> lm_sensors. I haven't install
On Fri, 13 Mar 2015 10:11:58 -0600
Canek Peláez Valdés wrote:
> On Fri, Mar 13, 2015 at 10:06 AM, German wrote:
> >
> > On Fri, 13 Mar 2015 15:59:04 +
> > Neil Bothwick wrote:
> >
> > > On 13 March 2015 15:52:41 GMT+00:00, German
> wrote:
> > > > This is very strange. When I boot up my box
On Fri, Mar 13, 2015 at 10:22 AM, German wrote:
[ ... ]
> > Are you using logind?
>
> Good question. What is logind? How I can find out what am I using?
If you are using systemd, you are using logind. Otherwise you are not.
Regards.
--
Canek Peláez Valdés
Profesor de asignatura, Facultad de Cien
Hi All,
I was given a CD with some pictures, but I am not able to mount it. This is
what dmesg reveals:
[ 7791.880206] sr 1:0:0:0: [sr0]
[ 7791.880211] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7791.880215] sr 1:0:0:0: [sr0]
[ 7791.880217] Sense Key : Hardware Error [current]
[ 779
On Fri, 13 Mar 2015 10:31:11 -0600
Canek Peláez Valdés wrote:
> On Fri, Mar 13, 2015 at 10:22 AM, German wrote:
> [ ... ]
> > > Are you using logind?
> >
> > Good question. What is logind? How I can find out what am I using?
>
> If you are using systemd, you are using logind. Otherwise you are
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 13 Mar 2015 16:30:59 +, Mick (michaelkintz...@gmail.com)
wrote about "[gentoo-user] Damaged CD medium" (in
<201503131631.02862.michaelkintz...@gmail.com>):
[snip]
> I tried on different PCs and I am getting the same error. Shall I
> forge
Mick wrote:
> Hi All,
>
> I was given a CD with some pictures, but I am not able to mount it.
> This is what dmesg reveals:
>
> [ 7791.880206] sr 1:0:0:0: [sr0]
> [ 7791.880211] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 7791.880215] sr 1:0:0:0: [sr0]
> [ 7791.880217] Sense Key : H
On Friday 13 Mar 2015 17:10:36 waben...@gmail.com wrote:
> Mick wrote:
> > Hi All,
> >
> > I was given a CD with some pictures, but I am not able to mount it.
> > This is what dmesg reveals:
> >
> > [ 7791.880206] sr 1:0:0:0: [sr0]
> > [ 7791.880211] Result: hostbyte=DID_OK driverbyte=DRIVER_SEN
On 2015-03-13, Mick wrote:
> Hi All,
>
> I was given a CD with some pictures, but I am not able to mount it. This is
> what dmesg reveals:
Here's what I recommend.
1) Use ddrescue to read as many data blocks as you can off the CD.
http://www.gnu.org/software/ddrescue/
ddrescue wi
Grant Edwards wrote:
> On 2015-03-13, Mick wrote:
> > Hi All,
> >
> > I was given a CD with some pictures, but I am not able to mount it. This
> > is
> > what dmesg reveals:
>
> Here's what I recommend.
>
> 1) Use ddrescue to read as many data blocks as you can off the CD.
>
> http://w
On Friday, March 13, 2015 4:30:59 PM Mick wrote:
> Hi All,
>
> I was given a CD with some pictures, but I am not able to mount it. This is
> what dmesg reveals:
>
> [ 7791.880206] sr 1:0:0:0: [sr0]
> [ 7791.880211] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> [ 7791.880215] sr 1:0:0:0: [
On Fri, 13 Mar 2015 15:59:04 +
Neil Bothwick wrote:
> On 13 March 2015 15:52:41 GMT+00:00, German wrote:
> > This is very strange. When I boot up my box and login as a user I can
> > use screen. But if I booted up and logged in as root first and then su
> > user, the user have the error mess
On Fri, 13 Mar 2015 15:59:04 +
Neil Bothwick wrote:
> On 13 March 2015 15:52:41 GMT+00:00, German wrote:
> > This is very strange. When I boot up my box and login as a user I can
> > use screen. But if I booted up and logged in as root first and then su
> > user, the user have the error mess
On 13/03/15 14:33, Neil Bothwick wrote:
Being a member of the portage group allows to to write to directories
owned by portage, so you can do things like emerge --sync and
emerge --fetchonly.
You can do fetchonly, but sync is not possible. You need root for that.
On Fri, 13 Mar 2015 23:49:20 +0200, Nikos Chantziaras wrote:
> > Being a member of the portage group allows to to write to directories
> > owned by portage, so you can do things like emerge --sync and
> > emerge --fetchonly.
>
> You can do fetchonly, but sync is not possible. You need root for
On Fri, 13 Mar 2015 17:54:01 + (UTC), Grant Edwards wrote:
> IIRC, there are ebuilds for ddrescue, photorec, and testdisk.
There's also app-cdr/dvdisaster.
--
Neil Bothwick
A consultant is a person who borrows your watch, tells you what time it
is, pockets the watch, and sends you a bill
On Fri, 13 Mar 2015 15:16:28 -0400, German wrote:
> after searching, I found the following solution to chmod tty1, like so:
> chmod o+rw /dev/tty1 and this worked, I was able to use screen as a
> user, however it doesn't stay permanently; after reboot, I got the same
> problem. How to chmod tty1 s
Neil Bothwick wrote:
> On Fri, 13 Mar 2015 15:16:28 -0400, German wrote:
>
> > after searching, I found the following solution to chmod tty1, like
> > so: chmod o+rw /dev/tty1 and this worked, I was able to use screen
> > as a user, however it doesn't stay permanently; after reboot, I got
> > th
On Friday 13 March 2015 22:28:29 Neil Bothwick wrote:
> A Smith & Weason beats Four Aces everytime.
A Smith and what?
--
Rgds
Peter.
On Sat, 14 Mar 2015 00:00:34 +0100
wrote:
> Neil Bothwick wrote:
>
> > On Fri, 13 Mar 2015 15:16:28 -0400, German wrote:
> >
> > > after searching, I found the following solution to chmod tty1, like
> > > so: chmod o+rw /dev/tty1 and this worked, I was able to use screen
> > > as a user, howev
On Sat, 14 Mar 2015 00:00:34 +0100, waben...@gmail.com wrote:
> > /dev/tty1 is already group writeable, so you should get the same
> > result by adding your user to the tty group.
>
> When I logged in as regular user then ownership of the tty that I
> used for log in is:
>
> crw--- 1 wabe
On Fri, 13 Mar 2015 23:10:22 +, Peter Humphrey wrote:
> On Friday 13 March 2015 22:28:29 Neil Bothwick wrote:
> > A Smith & Weason beats Four Aces everytime.
>
> A Smith and what?
You have far too much time on your hands!
I only steal taglines, I don't spell-check them.
--
Neil Bothwic
On Fri, 13 Mar 2015 23:22:50 +, Neil Bothwick wrote:
> Interesting, here, as a normal user:
>
> % ls -l /dev/tty1
> crw--w 1 root tty 4, 1 Mar 13 22:26 /dev/tty1
>
> > So it seems that after login you first have to chmod 770 the tty
> > before you do a su - user (user have to be in group
On Fri, 13 Mar 2015 23:28:32 +
Neil Bothwick wrote:
> On Fri, 13 Mar 2015 23:22:50 +, Neil Bothwick wrote:
>
> > Interesting, here, as a normal user:
> >
> > % ls -l /dev/tty1
> > crw--w 1 root tty 4, 1 Mar 13 22:26 /dev/tty1
> >
> > > So it seems that after login you first have to
On Friday 13 March 2015 23:25:21 Neil Bothwick wrote:
> On Fri, 13 Mar 2015 23:10:22 +, Peter Humphrey wrote:
> > On Friday 13 March 2015 22:28:29 Neil Bothwick wrote:
> > > A Smith & Weason beats Four Aces everytime.
> >
> > A Smith and what?
>
> You have far too much time on your hands!
Tr
On Friday 13 March 2015 23:28:32 Neil Bothwick wrote:
> I have this in /lib/udev/rules.d/50-udev-default.rules:
>
> SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
# grep tty /lib/udev/rules.d/50-udev-default.rules
SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666"
SUBSYS
Peter Humphrey wrote:
> On Friday 13 March 2015 23:28:32 Neil Bothwick wrote:
>
> > I have this in /lib/udev/rules.d/50-udev-default.rules:
> >
> > SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
>
> # grep tty /lib/udev/rules.d/50-udev-default.rules
> SUBSYSTEM=="tty", KERNEL=
wrote:
> Peter Humphrey wrote:
>
> > On Friday 13 March 2015 23:28:32 Neil Bothwick wrote:
> >
> > > I have this in /lib/udev/rules.d/50-udev-default.rules:
> > >
> > > SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
> >
> > # grep tty /lib/udev/rules.d/50-udev-default.rules
wrote:
> Neil Bothwick wrote:
>
> > On Fri, 13 Mar 2015 15:16:28 -0400, German wrote:
> >
> > > after searching, I found the following solution to chmod tty1,
> > > like so: chmod o+rw /dev/tty1 and this worked, I was able to use
> > > screen as a user, however it doesn't stay permanently; aft
On Friday 13 Mar 2015 22:24:32 Neil Bothwick wrote:
> On Fri, 13 Mar 2015 17:54:01 + (UTC), Grant Edwards wrote:
> > IIRC, there are ebuilds for ddrescue, photorec, and testdisk.
>
> There's also app-cdr/dvdisaster.
Thank you all. dd and ddrescue don't work, because the block device is not
50 matches
Mail list logo
