Re: [gentoo-user] init id c5 response too fast disabled for 5 min

2017-12-31 Thread mad.scientist.at.large
please see for information on using the drives built in test.  please run the short test followed by conveyance and then the long test (can be over an hour)  and show us the output if it complains.  it could be a normal aging bad s

Re: [gentoo-user] init id c5 response too fast disabled for 5 min

2017-12-31 Thread thelma
The CD boots OK. Other partition are working OK on this disk I only have problem with /dev/ada5 I can boot strap the drive and mount /dev/sda5 manually but I don't know if it can be fixed. The cable is OK as other partition are working correctly. Joseph On 12/31/2017 12:52 AM, mad.scientist.at.la

Re: [gentoo-user] init id c5 response too fast disabled for 5 min

2017-12-30 Thread mad.scientist.at.large
with the seg fault, you may have other problems.  you might want to unplug the hard drive (so you aren't spinning it) and run whatever diagnostics you can on the machine, just to make sure it's not failing/loosing it's little silicon mind.   seg fault shouldn't happen (from drive issues) i don

Re: [gentoo-user] init id c5 response too fast disabled for 5 min

2017-12-30 Thread mad.scientist.at.large
likely dying soon, or if you are lucky a key sector went out, if not the drive may be getting worse with every rotation.  If the drive is badly corrupted fsck can damage what is left.   definately DO NOT run fsck without knowing if the hardware has serious problems, also if part of it won't read

Re: [gentoo-user] init id c5 response too fast disabled for 5 min

2017-12-30 Thread thelma
I boot-strap the system from CD and run: fsck /dev/sda5 got bunch of errors eg.: Directories count wrong for group #1567 (1, counted=0). Fix? yes Free inodes count wrong for group #1568 (8073, counted=8192). Fix? yes Directories count wrong for group #1568 (1, counted=0). Fix? yes Free inodes c

Re: [gentoo-user] init id c5 response too fast disabled for 5 min

2017-12-30 Thread mad.scientist.at.large
that would most likely be a failing/failed hard drive or a bad connection/cable.  I'd suggest carefully checking the cable and then boot off a cd and back up anything you care about on the drive, you might check the SMART status of the drive.  In any case back it up first, worry about understand

[gentoo-user] init id c5 response too fast disabled for 5 min

2017-12-30 Thread thelma
I'm getting a strange error trying to boot my system. init id c5 response too fast disabled for 5 min the error appears right after when it to start mysql at boot. In addition when the system starts I see: ata4.00 failed command read DMA It is hart to post any information as I can not even boot