Re: [gentoo-user] get fences failed: -1 and [drm:i915_getparam] *ERROR*

2009-06-02 Thread Valmor de Almeida
AJ Spagnoletti wrote: > Using the link you posted I was able to get similar numbers on my > card, if you scroll down to the bottom of the page there where it > talks about driconf, and set up your drirc file you should be able to > apply these settings system wide. I am still have some issues with

Re: [gentoo-user] get fences failed: -1 and [drm:i915_getparam] *ERROR*

2009-05-30 Thread AJ Spagnoletti
> http://en.gentoo-wiki.com/wiki/Intel_GMA > > which is pertinent to my hardware and kernel/drivers. Therefore if I do > > > -> vblank_mode=0 glxgears > ATTENTION: default value of option vblank_mode overridden by environment. > get fences failed: -1 > param: 6, val: 0 > 4418 frames in 5.0 seconds

Re: [gentoo-user] get fences failed: -1 and [drm:i915_getparam] *ERROR*

2009-05-28 Thread Valmor de Almeida
AJ Spagnoletti wrote: >> -> glxgears >> get fences failed: -1 >> param: 6, val: 0 >> >> 300 frames in 5.0 seconds = 59.565 FPS >> 298 frames in 5.0 seconds = 59.524 FPS >> 299 frames in 5.0 seconds = 59.737 FPS >> 300 frames in 5.0 seconds = 59.884 FPS >> >> > > I have run into this same problem f

Re: [gentoo-user] get fences failed: -1 and [drm:i915_getparam] *ERROR*

2009-05-28 Thread AJ Spagnoletti
> -> glxgears > get fences failed: -1 > param: 6, val: 0 > > 300 frames in 5.0 seconds = 59.565 FPS > 298 frames in 5.0 seconds = 59.524 FPS > 299 frames in 5.0 seconds = 59.737 FPS > 300 frames in 5.0 seconds = 59.884 FPS > > I have run into this same problem following an xorg-server upgrade, The

Re: [gentoo-user] get fences failed: -1 and [drm:i915_getparam] *ERROR*

2009-05-28 Thread Valmor de Almeida
Neil Bothwick wrote: > On Thu, 28 May 2009 01:44:58 -0400, Valmor de Almeida wrote: > >> Anytime I fireup openoffice-3.0.0 components, I get this message at the >> command prompt: >> >> >> get fences failed: -1 >> param: 6, val: 0 > > I used to get this, although it caused no apparent problems. T

Re: [gentoo-user] get fences failed: -1 and [drm:i915_getparam] *ERROR*

2009-05-28 Thread Neil Bothwick
On Thu, 28 May 2009 01:44:58 -0400, Valmor de Almeida wrote: > Anytime I fireup openoffice-3.0.0 components, I get this message at the > command prompt: > > > get fences failed: -1 > param: 6, val: 0 I used to get this, although it caused no apparent problems. The message disappeared after upgr

[gentoo-user] get fences failed: -1 and [drm:i915_getparam] *ERROR*

2009-05-27 Thread Valmor de Almeida
Hello, Anytime I fireup openoffice-3.0.0 components, I get this message at the command prompt: get fences failed: -1 param: 6, val: 0 and a line in the /var/log/messages file [drm:i915_getparam] *ERROR* Unknown parameter 6 does anyone know what these mean? The application runs but appare